action #56789
opencoordination #162539: [saga][epic] future ideas version for version control features within openQA
coordination #162551: [epic] Extend needle version control handling - part 2
New needles from git repository not working with openqa-clone-custom-git-refspec
0%
Description
Use case:
To be able to test tests in production (openqa.opensuse.org or openqa.suse.de) before merging the needles and tests themselves, since results have proven to vary on those loaded machines compared to local openQA instance or VM.
It is currently working if there are no new needles involved, but this issue describes the problem with custom needles which would be theoretically supported by openqa-clone-custom-git-refspec but not working in practice.
Problem description:
First of all, documentation [1] says "Path to needles subdirectory to use, defaults to "needles" within PRODUCTDIR. Can be a git repository URL, comparable to CASEDIR", and CASEDIR states "for example git@github.com:os-autoinst/os-autoinst-distri-opensuse.git#feature/test".
[1] https://github.com/os-autoinst/os-autoinst/blob/master/doc/backend_vars.asciidoc
However,
openqa-clone-custom-git-refspec https://github.com/os-autoinst/os-autoinst-distri-opensuse/pull/8332 https://openqa.opensuse.org/tests/xxxxxxxx --apikey=XXX --apisecret=XXX NEEDLES_DIR=git@github.com:tjyrinki/os-autoinst-needles-opensuse.git#poo-12345
results in:
Could not create directory '/var/lib/empty/.ssh'.
Host key verification failed.
fatal: Could not read from remote repository.
Using https instead (NEEDLES_DIR=https://github.com/tjyrinki/os-autoinst-needles-opensuse.git) gets one further, but openQA complains about wrong needles location:
init needles from /var/lib/openqa/pool/15/os-autoinst-needles-opensuse
Needle /var/lib/openqa/pool/15/os-autoinst-needles-opensuse/ssh-login-ok-20160813.json is not under project directory /var/lib/openqa/cache/xxx at /usr/lib/os-autoinst/needle.pm line 63.
Oliver Kurz suggested playing around with the PRODUCTDIR to try to workaround the forbidding use of (correctly checked out) needles dir which I did but it didn't get any better with trying to set that to eg pool/... directories, which also changes on every run.
Updated by coolo over 5 years ago
- Category set to Feature requests
- Target version set to Ready
git@ urls are no option for sure. But https needle dirs should be supported, but we may need to know where to put it, so possibly we need yet another variable for that
Updated by tjyrinki_suse over 5 years ago
- Description updated (diff)
- Category deleted (
Feature requests) - Target version deleted (
Ready)
Updated by tjyrinki_suse over 5 years ago
- Category set to Feature requests
- Target version set to Ready
Updated by okurz about 5 years ago
coolo wrote:
but we may need to know where to put [the needles], so possibly we need yet another variable for that
they are already cloned to the pool directory however loading from there is prohibited which is merely a security feature, not a real technical limitation
Updated by mkittler about 5 years ago
- Status changed from New to In Progress
- Assignee set to mkittler
- Target version changed from Ready to Current Sprint
I guess allowing $pool_directory/os-autoinst-needles-opensuse
in addition to $bmwqemu::vars{PRJDIR}
would to the trick then.
Updated by mkittler about 5 years ago
- Status changed from In Progress to Feedback
PR has been merged: https://github.com/os-autoinst/os-autoinst/pull/1217
Let's see whether it works in production.
Updated by tjyrinki_suse about 5 years ago
Looking initially good on my own updated instance!
Fail without NEEDLES_DIR: http://d432.qam.suse.de/tests/125
Pass with NEEDLES_DIR: http://d432.qam.suse.de/tests/124
I will re-test on openqa.suse.de once it's deployed.
Updated by okurz about 5 years ago
tjyrinki_suse wrote:
I will re-test on openqa.suse.de once it's deployed.
already the case
Updated by coolo about 5 years ago
- Status changed from Feedback to New
We reverted this in master - and will shortly also do it on osd due to issue 57962
Updated by okurz about 5 years ago
- Related to action #57962: Needle load time increase added
Updated by mkittler about 5 years ago
- Status changed from New to In Progress
Another attempt: https://github.com/os-autoinst/os-autoinst/pull/1225
I've checked the performance this time:
before:
HEAD ist jetzt bei e2642e31 Merge pull request #1224 from os-autoinst/revert-1217-consider-needles-in-pool-directory
[martchus@linux-9lzf os-autoinst]$ time perl -I. -e 'use bmwqemu; use needle; needle::init($bmwqemu::vars{NEEDLES_DIR} = $bmwqemu::vars{PRJDIR} = "$ENV{OPENQA_BASEDIR}/openqa/share/tests/opensuse/products/opensuse/needles");'
[2019-10-11T16:51:06.861 CEST] [debug] init needles from /hdd/openqa-devel/openqa/share/tests/opensuse/products/opensuse/needles
[2019-10-11T16:51:07.404 CEST] [debug] loaded 5818 needles
real 0m0,823s
user 0m0,698s
sys 0m0,125s
after:
Ihr Branch ist auf demselben Stand wie 'Martchus/needle-dir-3'.
[martchus@linux-9lzf os-autoinst]$ time perl -I. -e 'use bmwqemu; use needle; $bmwqemu::vars{PRODUCTDIR} = "$ENV{OPENQA_BASEDIR}/openqa/share/tests/opensuse/products/opensuse"; needle::init;'
[2019-10-11T16:40:15.445 CEST] [debug] init needles from /hdd/openqa-devel/openqa/share/tests/opensuse/products/opensuse/needles
[2019-10-11T16:40:16.014 CEST] [debug] loaded 5818 needles
real 0m0,851s
user 0m0,738s
sys 0m0,112s
Updated by tjyrinki_suse about 5 years ago
PR 1226 is the actual new needle loading fix: https://github.com/os-autoinst/os-autoinst/pull/1226
Updated by okurz about 5 years ago
- Related to action #58289: Huge amount of "Needle file .* not found where expected. Check /var/lib/openqa for distri symlinks" on o3 in /var/log/openqa added
Updated by mkittler about 5 years ago
- Status changed from In Progress to Feedback
We needed to revert the change again: https://github.com/os-autoinst/os-autoinst/commit/5bc47a5ca12feb1a890735e7fe6daea2e125ff96
The problem is that os-autoinst now no longer references needles relative to the project directory. Instead, needles are referenced relative to the needle directory which is not what openQA expects.
This reveals a further difficulty of implementing this feature: The openQA web UI doesn't know the custom needles but it relies on knowing the involved needles to display candidates. I could now revert the revert and amend it to emit paths relative to the project directory. However, it is not clear how the case of custom needles should be handled.
I still like the general refactoring of the needle directory handling of my change which is now lost. Maybe I'll create a separate PR for this refactoring which basically simplifies the use of $needle::needlesdir
and $bmwqemu::vars{NEEDLES_DIR}
($bmwqemu::vars{NEEDLES_DIR}
has previously been used without validation by the needle downloader).
The actual issue is harder to solve. We could just flag those needles in the result-*.json
to prevent the web UI from displaying them. Or we somehow embed custom needle data within the results.
Updated by mkittler about 5 years ago
By the way, we have unit tests (01-test_needle.t
) which claim in comments that they cover what has been broken by the change. So these tests don't seem to be correct.
When checking the result-*.json
files manually the problem is actually easy to spot. Before:
{
"dents" : 0,
"details" : [
{
"area" : [
{
"h" : 300,
"result" : "ok",
"similarity" : 100,
"w" : 618,
"x" : 0,
"y" : 0
}
],
"error" : 0,
"frametime" : [
"0.54",
"0.58"
],
"json" : "tests/opensuse/products/opensuse/needles/bootmenu-TW-20190425.json",
"needle" : "bootmenu-TW-20190425",
After:
{
"dents" : 0,
"details" : [
{
"area" : [
{
"h" : 300,
"result" : "ok",
"similarity" : 100,
"w" : 618,
"x" : 0,
"y" : 0
}
],
"error" : 0,
"frametime" : [
"0.58",
"0.62"
],
"json" : "bootmenu-TW-20190425.json",
"needle" : "bootmenu-TW-20190425",
Updated by mkittler about 5 years ago
Note that the whole issue should only occur when caching is enabled (like it is on all of our production instances). Otherwise the pool directory is actually within the project directory. See Worker.pm
:
my $self = $class->SUPER::new(
instance_number => $instance_number,
no_cleanup => $cli_options->{'no-cleanup'},
pool_directory => "$OpenQA::Utils::prjdir/pool/$instance_number",
Updated by okurz about 5 years ago
We propose to get rid of PRJDIR at least in the scope of os-autoinst where we should not need it.
openQA changes:
diff --git a/lib/OpenQA/Schema/Result/Needles.pm b/lib/OpenQA/Schema/Result/Needles.pm
index 5a0ee0193..255c730c1 100644
--- a/lib/OpenQA/Schema/Result/Needles.pm
+++ b/lib/OpenQA/Schema/Result/Needles.pm
@@ -113,7 +113,7 @@ sub update_needle {
my $guard = $schema->txn_scope_guard;
if (!-f $filename) {
- $filename = catdir($OpenQA::Utils::sharedir, $filename);
+ $filename = catdir($module->job->needle_dir(), $filename);
if (!-f $filename) {
log_error(
"Needle file $filename not found where expected. Check $OpenQA::Utils::prjdir for distri symlinks");
diff --git a/lib/OpenQA/Worker/Engines/isotovideo.pm b/lib/OpenQA/Worker/Engines/isotovideo.pm
index 9a447bf11..276ddfb77 100644
--- a/lib/OpenQA/Worker/Engines/isotovideo.pm
+++ b/lib/OpenQA/Worker/Engines/isotovideo.pm
@@ -204,7 +204,6 @@ sub engine_workit {
OPENQA_URL => $openqa_url,
WORKER_INSTANCE => $instance,
WORKER_ID => $workerid,
- PRJDIR => $OpenQA::Utils::sharedir,
%$job_settings
);
log_debug('Job settings:');
@@ -231,8 +230,6 @@ sub engine_workit {
);
my $rsync_request_description = "Rsync cache request from '$rsync_source' to '$shared_cache'";
- $vars{PRJDIR} = $shared_cache;
-
# enqueue rsync task; retry in some error cases
for (my $remaining_tries = 3; $remaining_tries > 0; --$remaining_tries) {
return {error => "Failed to send $rsync_request_description"} unless $rsync_request->enqueue;
os-autoinst changes:
diff --git a/autotest.pm b/autotest.pm
index fc06f3de..2b7f83fe 100644
--- a/autotest.pm
+++ b/autotest.pm
@@ -54,7 +54,8 @@ loadtest is called.
sub find_script {
my ($script) = @_;
my $casedir = $bmwqemu::vars{CASEDIR};
- my $script_override_path = join('/', $bmwqemu::vars{PRJDIR} // '', 'factory/other', $script);
+ # TODO use proper way not relying on PRJDIR
+ my $script_override_path = join('/', 'factory/other', $script);
if (-f $script_override_path) {
bmwqemu::diag("Found override test module for $script: $script_override_path");
return File::Spec->abs2rel($script_override_path, $casedir);
diff --git a/bmwqemu.pm b/bmwqemu.pm
index a8dd756d..2a3302f5 100755
--- a/bmwqemu.pm
+++ b/bmwqemu.pm
@@ -48,7 +48,6 @@ $| = 1;
our $default_timeout = 30; # assert timeout, 0 is a valid timeout
-our $openqa_default_share = '/var/lib/openqa/share';
my @ocrrect;
@@ -162,15 +161,6 @@ sub ensure_valid_vars {
die "CASEDIR variable not set, unknown test case directory" if !defined $vars{CASEDIR};
die "No scripts in $vars{CASEDIR}" if !-e "$vars{CASEDIR}";
- unless ($vars{PRJDIR}) {
- if (index($vars{CASEDIR}, $openqa_default_share) != 0) {
- diag("PRJDIR not specified and CASEDIR ($vars{CASEDIR}) does not appear to be a subdir of default ($openqa_default_share), using CASEDIR instead");
- $vars{PRJDIR} = $vars{CASEDIR};
- }
- else {
- $vars{PRJDIR} = $openqa_default_share;
- }
- }
save_vars();
}
diff --git a/needle.pm b/needle.pm
index 2e22ad84..525d4a05 100644
--- a/needle.pm
+++ b/needle.pm
@@ -53,20 +53,20 @@ sub new {
}
my $self = {};
- if (index($jsonfile, $bmwqemu::vars{PRJDIR}) == 0) {
- $self->{file} = substr($jsonfile, length($bmwqemu::vars{PRJDIR}) + 1);
+ if (index($jsonfile, $bmwqemu::vars{CASEDIR}) == 0) {
+ $self->{file} = substr($jsonfile, length($bmwqemu::vars{CASEDIR}) + 1);
}
- elsif (-f File::Spec->catfile($bmwqemu::vars{PRJDIR}, $jsonfile)) {
+ elsif (-f File::Spec->catfile($bmwqemu::vars{CASEDIR}, $jsonfile)) {
# json file path already relative
$self->{file} = $jsonfile;
- $jsonfile = File::Spec->catfile($bmwqemu::vars{PRJDIR}, $jsonfile);
+ $jsonfile = File::Spec->catfile($bmwqemu::vars{CASEDIR}, $jsonfile);
}
else {
- die "Needle $jsonfile is not under project directory $bmwqemu::vars{PRJDIR}";
+ die "Needle $jsonfile is not under CASEDIR $bmwqemu::vars{CASEDIR}";
}
- # $json->{file} contains path relative to $bmwqemu::vars{PRJDIR}
- # $jsonfile contains absolute path within $bmwqemu::vars{PRJDIR}
+ # $json->{file} contains path relative to $bmwqemu::vars{CASEDIR}
+ # $jsonfile contains absolute path within $bmwqemu::vars{CASEDIR}
if (!$json) {
try {
Updated by mkittler about 5 years ago
And my previous comment is incorrect. The variable prjdir is used inconsistently. On the worker side (the diff from my last comment) it is something like /var/lib/openqa
and within isotovideo /var/lib/openqa/share
. So the pool directory is not within the prjdir from isotovideo's point of view.
Updated by mkittler about 5 years ago
- Status changed from Feedback to In Progress
Draft PRs for removing PRJDIR in os-autoinst context and adapting openQA to it: https://github.com/os-autoinst/os-autoinst/pull/1234, https://github.com/os-autoinst/openQA/pull/2410
With that change needles are referenced relatively to the needle directory and not the prjdir/sharedir. This is a first step to make os-autoinst/openQA more flexible. Of course the openQA web UI will still not be able to display candidates from custom needle checkouts. (It will display the version from its version of the needle repo or won't display the candidate at all if it doesn't exist in its needle repo.)
Updated by mkittler about 5 years ago
The draft PRs are actually no longer drafts and one has already been merged. These PRs solve the problem of using these needles on the os-autoinst side.
However, the web UI would still be unaware. I previously suggested to embed the candidates into the results. After discussing the issue with the team it seems just referencing a Git hash makes more sense.
So I would implement it in the following way:
- os-autoinst side
- The Git revspec/hash is determined and assigned to a test variable (e.g.
NEEDLES_GIT_REVSPEC
) when checking out the custom repo. (The repo URL itself might just be something likehttps://github.com/tjyrinki/os-autoinst-needles-opensuse.git
and therefore does not already contain the concrete revspec itself.) - We need a way to make up a URL like
https://raw.githubusercontent.com/...
on the web UI side for the job. So we need to assign all relevant details to test variables (e.g.NEEDLES_GIT_HOST=github
andNEEDLES_GIT_REPO_PATH=tjyrinki/os-autoinst-needles-opensuse
).
- The Git revspec/hash is determined and assigned to a test variable (e.g.
- web UI side
- The image preview and needle editor are made aware of the mentioned variables. If they exist and
NEEDLES_GIT_HOST
refers to a known Git host the usual links to candidate needles are replaced by links pointing to that the needle on the host (e.g.https://raw.githubusercontent.com/tjyrinki/os-autoinst-needles-opensuse/f456756cdca46b607415df43332961bded6b3620/42-bootmenu-xen-kernel-20150918.png
). - The needle update code must be aware as well.
- In particular, it must not reject a needle if it is not locally available if
NEEDLES_GIT_*
variables are present. - Not sure whether those "Git needles" should be tracked within the database. I'd start with not adding them to the database and see how well that goes. Likely the database entries for needles are only required for cleanup so tracking these needles within the openQA database wouldn't be necessary.
- In particular, it must not reject a needle if it is not locally available if
- So if no special test variables are set everything works as before. The Git host specific code is only an optional addition. It shouldn't be hard to implement URL generators for different Git hosts if that's required (likely it is since we're also using GitLab for needles).
- The image preview and needle editor are made aware of the mentioned variables. If they exist and
The entire approach could roughly apply to https://progress.opensuse.org/issues/54965 as well. Just replace "needle" with "test code". However, in this case we would likely not show our own source code viewer anymore and simply redirect to the Git host web page.
Updated by mkittler about 5 years ago
- Related to action #54965: Cannot inspect the source code of the tests from my fork added
Updated by okurz about 5 years ago
I missed the monitoring alerts since this morning. Reverted openQA package updates on o3 with sudo zypper in --oldpackage /var/cache/zypp/packages/devel_openQA/noarch/openQA{,-common,-client}-4.6.1571759996.a3da178cd-lp151.1938.1.noarch.rpm
Now workers fail, e.g. openqa-worker1:1 :
Oct 24 18:06:48 openqaworker1 worker[3203]: [info] Registered and connected via websockets with openQA host http://openqa1-opensuse and worker ID 51
Oct 24 18:06:49 openqaworker1 worker[3203]: Use of uninitialized value in numeric ne (!=) at /usr/share/openqa/script/../lib/OpenQA/Worker/Job.pm line 694.
Oct 24 18:06:49 openqaworker1 worker[3203]: [info] Test schedule has changed, reloading test_order.json
Oct 24 18:06:49 openqaworker1 worker[3203]: [warn] Can't open /var/lib/openqa/pool/1/testresults/test_order.json for result upload - likely isotovideo could not be started or failed early. Error message: No such file or dire>
Oct 24 18:06:49 openqaworker1 worker[3203]: Mojo::Reactor::Poll: Timer failed: Can't use an undefined value as an ARRAY reference at /usr/share/openqa/script/../lib/OpenQA/Worker/Job.pm line 1132.
Oct 24 18:06:49 openqaworker1 worker[3203]: [error] Stopping because a critical error occurred.
Oct 24 18:06:49 openqaworker1 worker[3203]: [error] Another error occurred when trying to stop gracefully due to an error. Trying to kill ourself forcefully now.
git log of openQA:
a3da178cd..da2de85d9
fd17bff6f (okurz/fix/package_tests) spec: Fix package tests already failing on database setup
adae4ab06 Fix VNC port info for ports > 99 in devel mode
8a682cc98 Prevent logging needle problems twice
e65f62948 Provide default filename for needles from the name
0d4152d19 Move needle_info() from Utils.pm to Step.pm
71f1bdf67 (okurz/fix/qemu_kvm) Fix missing 'qemu-kvm' in non-x86_64 package tests
36aa97443 Reduce use of project dir to be more flexible regarding custom test runs
9bf26a71b Calculate coverage in Circleci in all branches
and os-autoinst:
e3b331a2..5391548d
7d482890 (perlpunk/new-status) Increase version numbers
87276ac7 Add new status file that worker can read from
c52303a0 Consider tests with `tools/tidy --only-changed`
ab0554c2 (okurz/feature/container) spec: Fix missing, additional runtime requirements
a45e17fa Allow tidy to run only over local changes
37d31fc7 Improve 'check_ssh_serial'
55db2e0d Make start_serial_grab blocking
5266e820 Fix svirt backend's 100 % CPU usage
I put all git commits between yesterday (last good) and today in https://progress.opensuse.org/issues/56789#note-23 . I suspect either 0d4152d19 Move needle_info() from Utils.pm to Step.pm or 36aa97443 Reduce use of project dir to be more flexible regarding custom test runs from openQA to be problematic or 87276ac7 Add new status file that worker can read from from os-autoinst. What's disturbing that the old web ui does not seem to work correctly even with a rolled back, old worker anymore. as if the settings in the vars.json files is now troubling.
I will upgrade the webui again to the latest version. If we are lucky in the new version just the custom git clone jobs are problematic. seems the newer webui is better: https://openqa.opensuse.org/tests/1065110# is running ok, regardless if worker version is from today or yesterday. As expected again we have a lot of errors referencing needles again in the log file. ggardet suspected that only the custom-git jobs are affected but from the frequency of the message appearing I suspect it is affecting all. To check yourself use sudo tail -f /var/log/openqa | grep 'not found within '
on o3.
Updated by livdywan about 5 years ago
mkittler wrote:
So I would implement it in the following way:
- os-autoinst side
- The Git revspec/hash is determined and assigned to a test variable (e.g.
NEEDLES_GIT_REVSPEC
) when checking out the custom repo. (The repo URL itself might just be something likehttps://github.com/tjyrinki/os-autoinst-needles-opensuse.git
and therefore does not already contain the concrete revspec itself.)- We need a way to make up a URL like
https://raw.githubusercontent.com/...
on the web UI side for the job. So we need to assign all relevant details to test variables (e.g.NEEDLES_GIT_HOST=github
andNEEDLES_GIT_REPO_PATH=tjyrinki/os-autoinst-needles-opensuse
).
How about using a template instead? Something like NEEDLES_GIT_RAW=https://gitlab.com/$REPO/raw/$SHA1/$FILENAME
or NEEDLES_GIT_RAW=https://raw.githubusercontent.com/$REPO/$SHA1/$FILENAME
depending on the host. IT wouldn't require any further knowledge except filling in the variables.
Updated by mkittler about 5 years ago
So every test which makes use of this needs these variables provided from the outside. I don't think that makes it easier for our users. And we still needed to be clever to deduce $REPO
(or require it to be provided, too).
Updated by okurz about 5 years ago
- Priority changed from Normal to Urgent
See notes in the above comment #56789#note-23 . Please monitor the situation on o3 and crosscheck "normal" jobs as well as custom-git jobs in production as well.
Updated by mkittler about 5 years ago
Taking into account that we need to support custom GitLab instances with URLs like https://gitlab.suse.de/openqa/os-autoinst-needles-sles.git
being clever with auto-assigning NEEDLES_GIT_HOST
and NEEDLES_GIT_REPO_PATH
like I suggested is hard. There could also be Git hosts like https://martchus.no-ip.biz/gitea/Martchus/syncthingtray.git
where NEEDLES_GIT_HOST
is only part of the path. That means I will go for the approach @cdywan suggested. However, the $REPO
part should better be provided from the outside as well because I'm not sure whether we can deduce it in the general case from the repo URL.
By the way, here's the fix for the problem mentioned by @okurz: https://github.com/os-autoinst/openQA/pull/2432
Updated by okurz about 5 years ago
- Related to action #58574: [openqa] test fails in dashboard, desktop runner shows up a little bit late added
Updated by okurz about 5 years ago
Btw, I haven't reviewed your recent suggestions for "features" yet as I am still in "urgent regression fixing mode" ;) I would appreciate you give me some time to review your ideas. I can of course also review them in the form of PRs but this would have involved more upfront work by you then.
https://github.com/os-autoinst/openQA/pull/2432 merged and deployed on openqaworker1.o.o already. https://openqa.opensuse.org/tests/1065586 is a "custom-git-clone" job running on the worker and it looks better than the previous incomplete https://openqa.opensuse.org/tests/1065537/file/autoinst-log.txt
Updated by mkittler about 5 years ago
- Priority changed from Urgent to Normal
The fix works so I'm lowering the priority. Of course candidates for jobs which ran with the broken version can not be restored.
I set the ticket to feedback to give you some time to review my idea.
Updated by mkittler about 5 years ago
- Status changed from In Progress to Feedback
Updated by mkittler about 5 years ago
I also have another idea: The full link (e.g. https://raw.githubusercontent.com/tjyrinki/os-autoinst-needles-opensuse/f456756cdca46b607415df43332961bded6b3620/42-bootmenu-xen-kernel-20150918.png) could already be generated on the os-autoinst side when writing the results. Then openQA really only needs to check whether the candidate reference has an URL and would simply use that URL. The advantage would be that the code dealing with Git would be spread less across the repositories. Additionally, the template substitution wouldn't run each and every time the test result is displayed but only once when it is generated. The performance impact of this feature on the job module upload would also be less because the web UI doesn't need to check the settings of the related job.
Updated by mkittler about 5 years ago
I've continued with the implementation to see myself whether the idea works out. I think there actually speaks nothing against being able to set URL templates for some "well known hosts" automatically (e.g. GitHub) and relying on the user to provide them for other hosts.
But there's a more annoying problem: The server-side controller code of the image preview and the needle editor relies on the local needle files to read the area information. However, the area info is actually just passed to the client. So in theory it would be possible to just pass the URL to the client like for the PNG (e.g. https://raw.githubusercontent.com/tjyrinki/os-autoinst-needles-opensuse/f456756cdca46b607415df43332961bded6b3620/42-bootmenu-xen-kernel-20150918.json) and fetch the info via AJAX. The problem with that is that cross origin requests like that are not allowed (e.g. try $.ajax({url: "https://raw.githubusercontent.com/tjyrinki/os-autoinst-needles-opensuse/f456756cdca46b607415df43332961bded6b3620/42-bootmenu-xen-kernel-20150918.json"});
in the JavaScript console).
The alternative would be loading the JSON from the Git host in our server's controller code but that's not really nice because it adds additional load to the server and disables the possibility for lazy loading. We could also provide a special "proxy" routes on our server. That way we could at least only lazy-load the candidates the user selects.
And the other alternative is of course to go back to the original plan of embedding the candidates within the test results. We could also only embed the JSON/areas and still load the PNG directly from the Git host. Combining the two approaches feels a bit inconsistent, though.
And since the cross origin restrictions don't apply to the PNG: https://www.peter-eigenschink.at/projects/steganographyjs (not a serious suggestion)
Updated by mkittler about 5 years ago
- Difficulty set to hard
Or we really have the Git checkout on the web UI host, too. So when the job is added not only the worker/isotovideo clones the repository but also the web UI would add the remote and fetch the required branch. This could happen in a Minion task while the job is scheduled. The file contents for a specific version could be read via git show $SHA:$NEEDLE_PATH
. This approach has the advantage that it is Git host independent. This approach adds a lot of complexity on the web UI side (e.g. we need to extend the needle cleanup) but it seems conceivable.
Updated by mkittler about 5 years ago
That's roughly how the idea described in the last comment would work:
- Someone schedules a job with
NEEDLES_DIR=https://github.com/tjyrinki/os-autoinst-needles-opensuse.git#a635f114218f59baada8c4cb2bdbdc6b6e769a84
. We require to add the branch name or checksum here from the beginning. - When the job is executed
isotovideo
clones the repo as it is possible already. When https://github.com/os-autoinst/os-autoinst/pull/1234 is merged os-autoinst will be able to actually use that checkout.- isotovideo should better preserve the
NEEDLES_DIR
variable (so far it overrides it with the local path to the cloned repository)
- isotovideo should better preserve the
- The web UI adds the remote to its needle checkout when the job is scheduled.
- e.g. the following commands would do it:
git -C $needle_checkout remote add tjyrinki https://github.com/tjyrinki/os-autoinst-needles-opensuse.git # ignoring "fatal: remote tjyrinki already exists"
git -C $needle_checkout fetch tjyrinki a635f114218f59baada8c4cb2bdbdc6b6e769a84
- The commands are quite fast but it might still make sense to run them as Minion job.
- To avoid interference with the needle editor we could use a separate checkout here.
- e.g. the following commands would do it:
- The web UI can read a needle files via e.g.
git show a635f114218f59baada8c4cb2bdbdc6b6e769a84:42-bootmenu-xen-kernel-20150918.png
.- Mojo::IOLoop::ReadWriteFork might help to implement this
Things which still need to be considered:
- Cleanup/tracking
- Possibly updating "last seen/matched" info
- Error handling when the Git repo isn't ready by the time the candidate needs to be displayed
- Deducing the jobs version info from the job settings variable
NEEDLES_DIR
all the time it is needed is likely inefficient. Maybe add a separate database column?
Updated by mkittler about 5 years ago
- Status changed from Feedback to New
- Assignee deleted (
mkittler) - Target version changed from Current Sprint to Ready
The Git checkout on the isotovideo side could be made more efficient by having a master needles repo permanently around and adding remotes as needed (like described for the web UI). We can then clone from that local repo via git clone --shared
into the pool directory.
We agreed to improve the overall epic first before continuing with this. So I'm unassigning for now and remove it from the current sprint.
I also set the ticket back to "New" as "Feedback" is now preserved for user feedback and not feedback from other openQA developers.
Updated by tinita about 5 years ago
- Related to action #59184: Research about testing with a custom git ref added
Updated by okurz about 5 years ago
- Copied to action #59330: "needledir not found: .*null/": openqa-clone-custom-git-refspec fails setting NEEDLES_DIR=null with new os-autoinst or openQA added
Updated by okurz about 5 years ago
I did a smaller change in https://github.com/os-autoinst/os-autoinst/pull/1286 to allow specifying PRODUCTDIR and NEEDLESDIR relative to the CASEDIR top.
Updated by okurz over 4 years ago
- Priority changed from Normal to Low
The last mentioned change should help or maybe even resolves the problem, but certainly it's less severe.
Updated by okurz over 4 years ago
- Target version changed from Ready to future
we should focus on other issues in the parent #58184 first before we look into any potential special handling of needle repos which are not shared with test repos. General idea I have: Use git submodules for needles if not the same repo as for tests.
Updated by mkittler over 4 years ago
- Related to action #70333: providing a git branch for NEEDLES_DIR does not appear to work on o3 added
Updated by mkittler over 3 years ago
- Related to action #91905: webui fails to display needles when using a git repository as CASEDIR added
Updated by livdywan 4 months ago
- Related to action #162035: Support development of "Use needles from correct ref of NEEDLES_DIR" https://github.com/os-autoinst/openQA/pull/5175 size:M added