action #117205
closedSome boot_from_pxe failed from assigned worker: grenache-1:17 (kermit) and also openqaworker2:17 (quinn) size:M
Added by xguo about 2 years ago. Updated about 2 years ago.
0%
Description
Refer to the latest test results of the OSD build24.1, https://openqa.suse.de/tests/overview?distri=sle&version=15-SP5&build=24.1&groupid=263
find out some new failures about boot_from_pxe test module,
at the same time, these boot_from_pxe failures were assigned worker: grenache-1:17.
Please help us check with this assigned worker: grenache-1:17.
For now, this boot_from_pxe failure block our OSD tests.
Please refer to https://openqa.suse.de/admin/workers/1248 for more details
Acceptance criteria¶
- AC1: The affected worker slots are back in production with working pxe boot
Rollback steps¶
- Re-enable workers for production, see https://gitlab.suse.de/openqa/salt-pillars-openqa/-/merge_requests/445/diffs
Files
| boot_from_pxe_fail_01.png (62.2 KB) boot_from_pxe_fail_01.png | xguo, 2022-09-26 07:58 | ||
| boot_from_pxe_fail_02.png (31.7 KB) boot_from_pxe_fail_02.png | xguo, 2022-09-26 07:58 | ||
| activate_license_01.png (375 KB) activate_license_01.png | xguo, 2022-11-07 16:15 | ||
| activate_license_02.png (245 KB) activate_license_02.png | xguo, 2022-11-07 16:15 | ||
| Selection_109.png (131 KB) Selection_109.png | waynechen55, 2022-11-09 07:16 |
Updated by xguo about 2 years ago
- File boot_from_pxe_fail_01.png boot_from_pxe_fail_01.png added
- File boot_from_pxe_fail_02.png boot_from_pxe_fail_02.png added
short update, test failure url:
https://openqa.suse.de/tests/9586828#step/boot_from_pxe/11
refer to the attachments for more details.
Updated by jbaier_cz about 2 years ago
Important info from the job:
# Test died: Error connecting to <root@10.162.2.87>: No route to host at /usr/lib/os-autoinst/testapi.pm line 1739.
testapi::select_console("root-ssh") called at sle/lib/Utils/Backends.pm line 98
Utils::Backends::use_ssh_serial_console() called at sle/lib/susedistribution.pm line 741
susedistribution::activate_console(Distribution::Sle::15_current=HASH(0x10031e11708), "install-shell") called at /usr/lib/os-autoinst/testapi.pm line 1747
testapi::select_console("install-shell") called at sle/lib/bootloader_setup.pm line 1503
bootloader_setup::sync_time() called at sle/tests/boot/boot_from_pxe.pm line 202
boot_from_pxe::run(boot_from_pxe=HASH(0x1003719ad18)) called at /usr/lib/os-autoinst/basetest.pm line 328
Updated by xguo about 2 years ago
Quick update, Assigned worker: openqaworker2:17 have the same problem.
Test failure url:
https://openqa.suse.de/tests/9564617#step/boot_from_pxe/10
Also, refer to https://openqa.suse.de/admin/workers/603 for more details.
Updated by mkittler about 2 years ago
Yes, and it also fails with a similar error:
[2022-09-22T19:42:31.224242+02:00] [debug] Could not connect to root@kermit.qa.suse.de, Retrying after some seconds...
[2022-09-22T19:42:41.225551+02:00] [debug] Could not connect to root@kermit.qa.suse.de, Retrying after some seconds...
[2022-09-22T19:42:51.332197+02:00] [info] ::: basetest::runtest: # Test died: Error connecting to <root@kermit.qa.suse.de>: No route to host at /usr/lib/os-autoinst/testapi.pm line 1739.
testapi::select_console("root-ssh") called at sle/lib/Utils/Backends.pm line 98
Utils::Backends::use_ssh_serial_console() called at sle/lib/susedistribution.pm line 741
susedistribution::activate_console(Distribution::Sle::15_current=HASH(0x56531c77dde0), "install-shell") called at /usr/lib/os-autoinst/testapi.pm line 1747
testapi::select_console("install-shell") called at sle/lib/bootloader_setup.pm line 1503
bootloader_setup::sync_time() called at sle/tests/boot/boot_from_pxe.pm line 202
boot_from_pxe::run(boot_from_pxe=HASH(0x56531f320b50)) called at /usr/lib/os-autoinst/basetest.pm line 328
eval {...} called at /usr/lib/os-autoinst/basetest.pm line 322
basetest::runtest(boot_from_pxe=HASH(0x56531f320b50)) called at /usr/lib/os-autoinst/autotest.pm line 360
eval {...} called at /usr/lib/os-autoinst/autotest.pm line 360
autotest::runalltests() called at /usr/lib/os-autoinst/autotest.pm line 243
eval {...} called at /usr/lib/os-autoinst/autotest.pm line 243
autotest::run_all() called at /usr/lib/os-autoinst/autotest.pm line 294
autotest::__ANON__(Mojo::IOLoop::ReadWriteProcess=HASH(0x5653211b2d30)) called at /usr/lib/perl5/vendor_perl/5.26.1/Mojo/IOLoop/ReadWriteProcess.pm line 326
eval {...} called at /usr/lib/perl5/vendor_perl/5.26.1/Mojo/IOLoop/ReadWriteProcess.pm line 326
Mojo::IOLoop::ReadWriteProcess::_fork(Mojo::IOLoop::ReadWriteProcess=HASH(0x5653211b2d30), CODE(0x56532050abc8)) called at /usr/lib/perl5/vendor_perl/5.26.1/Mojo/IOLoop/ReadWriteProcess.pm line 488
Mojo::IOLoop::ReadWriteProcess::start(Mojo::IOLoop::ReadWriteProcess=HASH(0x5653211b2d30)) called at /usr/lib/os-autoinst/autotest.pm line 296
autotest::start_process() called at /usr/bin/isotovideo line 273
So this is about the IPMI backend and the involved baremetal SUTs are so far 10.162.2.87 (quinn.qa.suse.de) and kermit.qa.suse.de. Likely the connection error is just because the iPXE boot didn't work in the first place. Judging by the title of the iPXE menu that menu is provided within qanet. I would guess @nicksinger is the one who set it up then. Maybe he can have a look.
Updated by nicksinger about 2 years ago
- Status changed from New to In Progress
- Assignee set to nicksinger
Updated by nicksinger about 2 years ago
Me and @mgriessmeier tried to debug a little what is going wrong here. We found the following logfiles in the atftpd log:
Sep 26 13:54:06 qanet atftpd[18168.140301027731200]: Creating new socket: 10.162.0.1:44486
Sep 26 13:54:06 qanet atftpd[18168.140301027731200]: Serving /mnt/openqa/repo/SLE-15-SP5-Online-x86_64-Build21.1-Media1/boot/x86_64/loader/linux to 10.162.2.87:49159
Sep 26 13:54:06 qanet atftpd[18168.140301027731200]: tsize option -> 11394848
Sep 26 13:54:06 qanet atftpd[18168.140301027731200]: blksize option -> 1408
Sep 26 13:54:11 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:54:17 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:54:23 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:54:28 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:54:33 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:54:38 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:54:43 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:54:48 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:54:53 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:54:58 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:55:03 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:55:08 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:55:13 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:55:18 qanet atftpd[18168.140301027731200]: timeout: retrying...
Sep 26 13:55:23 qanet atftpd[18168.140301027731200]: client (10.162.2.87) not responding
Sep 26 13:55:23 qanet atftpd[18168.140301027731200]: End of transfer
Sep 26 13:55:23 qanet atftpd[18168.140301027731200]: Server thread exiting
We tried to set the "--no-timeout" option which according to the docs (https://linux.die.net/man/8/atftpd) should disable the client-side timeouts while loading files. It still fails which indicates that the client is not timing out while loading resources (kernel and initrd to be precise) but rather the server itself fails to deliver blocks to the client.
However, monitoring wireshark shows that file transfer seems to be fine and the client acknowledges every block up until and including the last one.
We have to further look into the issue what is causing grub to fail (sporadically) while booting the supplied files.
Updated by okurz about 2 years ago
- Priority changed from Normal to High
- Target version set to Ready
Updated by okurz about 2 years ago
- Project changed from QA (public) to openQA Infrastructure (public)
Updated by openqa_review about 2 years ago
- Due date set to 2022-10-12
Setting due date based on mean cycle time of SUSE QE Tools
Updated by okurz about 2 years ago
- Subject changed from Some boot_from_pxe failed from assigned worker: grenache-1:17 to Some boot_from_pxe failed from assigned worker: grenache-1:17 and also openqaworker2:17
Discussed in weekly unblock 2022-09-28: Jobs on other "neighboring" machines work ok, e.g. https://openqa.suse.de/tests/9621432#step/boot_from_pxe/7 on scooter. Other product versions also fail on the assigned worker https://openqa.suse.de/admin/workers/1248 linked to the physical machine quinn, e.g. https://openqa.suse.de/tests/9617954 on SLE Micro 5.3, https://openqa.suse.de/tests/9583700 on SLE15-SP3. Also kermit directly on top of quinn in the same rack shows problems, assigned worker instance openqaworker2:17, e.g. https://openqa.suse.de/tests/9620065#step/boot_from_pxe/8
I suggest to try to boot an OS on one of the machines and run mtr and/or iperf to check connection to qanet and check for any instabilities. Relevant for both cases is that qanet is in SUSE Nbg SRV2 and the physical hosts are in NUE Lab 2.2.14 (TAM) but we also have other machines in this configuration which seem to work fine, e.g. fozzie, gonzo, scooter.
Updated by nicksinger about 2 years ago
- Subject changed from Some boot_from_pxe failed from assigned worker: grenache-1:17 and also openqaworker2:17 to Some boot_from_pxe failed from assigned worker: grenache-1:17 (kermit) and also openqaworker2:17 (quinn)
- Status changed from In Progress to Workable
- Assignee changed from nicksinger to xguo
I unfortunately failed to boot any other Linux over PXE. I also gave booting over samba a try but failed to mount a rescue medium with an anonymous share. Most likely it works with authentication but I didn't set it up.
@xguo: Other machines work fine, so we can exclude a infrastructure problem. I'd kindly ask you to take over here and check why these machines do not behave properly.
If you have questions regarding our setup I'm happy to explain to you.
Another thing you could try is to reset the bios/flash - we had a similar issue just recently with a power machine.
Updated by okurz about 2 years ago
- Description updated (diff)
I merged https://gitlab.suse.de/openqa/salt-pillars-openqa/-/merge_requests/445 so the two workers are disabled from production jobs for now.
Updated by xguo about 2 years ago
nicksinger wrote:
I unfortunately failed to boot any other Linux over PXE. I also gave booting over samba a try but failed to mount a rescue medium with an anonymous share. Most likely it works with authentication but I didn't set it up.
@xguo: Other machines work fine, so we can exclude a infrastructure problem. I'd kindly ask you to take over here and check why these machines do not behave properly.
If you have questions regarding our setup I'm happy to explain to you.Another thing you could try is to reset the bios/flash - we had a similar issue just recently with a power machine.
Great, got it. I will confirm it. if there was any new problem, I will let you know.
Thanks,
Leon
Updated by xguo about 2 years ago
okurz wrote:
I merged https://gitlab.suse.de/openqa/salt-pillars-openqa/-/merge_requests/445 so the two workers are disabled from production jobs for now.
Super. this merged is so helpful with us.
Thanks so much for your great help.
Updated by tinita about 2 years ago
- Subject changed from Some boot_from_pxe failed from assigned worker: grenache-1:17 (kermit) and also openqaworker2:17 (quinn) to Some boot_from_pxe failed from assigned worker: grenache-1:17 (kermit) and also openqaworker2:17 (quinn) size:M
- Description updated (diff)
Updated by livdywan about 2 years ago
- Due date deleted (
2022-10-12) - Assignee deleted (
xguo)
Updated by xguo about 2 years ago
cdywan wrote:
Apparently @xguo misunderstood Nick's request for help, only confirmed that the machines were no longer being used and suggests to ask infra to investigate network connectivity.
To be honest, I don't have enough permissions and experience to configure the assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn). Meanwhile, Just only do my best to check the situation of the assigned workers.
Quick update, currently, I have confirmed that the assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn) work very well on boot_from_pxe test module now.
grenache-1:17 (kermit)
https://openqa.suse.de/tests/9752953
openqaworker2:17 (quinn)
https://openqa.suse.de/tests/9752361
Next, do more validation run both assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn) together on our OSD environment, if there was not any more the same problem for the assigned workers again, plan to create a new MR to active them.
Updated by xguo about 2 years ago
xguo wrote:
cdywan wrote:
Apparently @xguo misunderstood Nick's request for help, only confirmed that the machines were no longer being used and suggests to ask infra to investigate network connectivity.
To be honest, I don't have enough permissions and experience to configure the assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn). Meanwhile, Just only do my best to check the situation of the assigned workers.
Quick update, currently, I have confirmed that the assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn) work very well on boot_from_pxe test module now.
grenache-1:17 (kermit)
https://openqa.suse.de/tests/9752953openqaworker2:17 (quinn)
https://openqa.suse.de/tests/9752361Next, do more validation run both assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn) together on our OSD environment, if there was not any more the same problem for the assigned workers again, plan to create a new MR to active them.
@nicksinger would you mind giving me some details about reset bios|flash for grenache-1:17 (kermit) and openqaworker2:17 (quinn) - Supermicro test machines as your mentioned.
Meanwhile, quick update, for now, I just only reproduce the same problem in 1/10 times both worker grenache-1:17 (kermit) and openqaworker2:17 (quinn).
Reproduce the same problem in 1/10 time as below:
https://openqa.suse.de/tests/9768087
Please refer to the following url for more details:
https://openqa.suse.de/admin/workers/603
https://openqa.suse.de/admin/workers/1248
Next, create a new MR to enable worker grenache-1:17 (kermit) and openqaworker2:17 (quinn)
https://gitlab.suse.de/openqa/salt-pillars-openqa/-/merge_requests/448
Updated by waynechen55 about 2 years ago
xguo wrote:
xguo wrote:
cdywan wrote:
Apparently @xguo misunderstood Nick's request for help, only confirmed that the machines were no longer being used and suggests to ask infra to investigate network connectivity.
To be honest, I don't have enough permissions and experience to configure the assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn). Meanwhile, Just only do my best to check the situation of the assigned workers.
Quick update, currently, I have confirmed that the assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn) work very well on boot_from_pxe test module now.
grenache-1:17 (kermit)
https://openqa.suse.de/tests/9752953openqaworker2:17 (quinn)
https://openqa.suse.de/tests/9752361Next, do more validation run both assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn) together on our OSD environment, if there was not any more the same problem for the assigned workers again, plan to create a new MR to active them.
@nicksinger would you mind giving me some details about reset bios|flash for grenache-1:17 (kermit) and openqaworker2:17 (quinn) - Supermicro test machines as your mentioned.
Meanwhile, quick update, for now, I just only reproduce the same problem in 1/10 times both worker grenache-1:17 (kermit) and openqaworker2:17 (quinn).
Reproduce the same problem in 1/10 time as below:
https://openqa.suse.de/tests/9768087Please refer to the following url for more details:
https://openqa.suse.de/admin/workers/603
https://openqa.suse.de/admin/workers/1248Next, create a new MR to enable worker grenache-1:17 (kermit) and openqaworker2:17 (quinn)
https://gitlab.suse.de/openqa/salt-pillars-openqa/-/merge_requests/448
@xguo @nicksinger @okurz Any follow-up actions on these two machines/workers ? Although I said "we can have a try" in this mr, I agree with Oliver that 10% percentage is not a small value (although this might be the result of limited times of experiment). Root cause for this issue should be identified and fixed which is the best. But, at the same time, virtualization lost two machines to run tests. It is not a very big problem if clock is not ticking. So could we come up with a plan or schedule to have this fixed in any event ?
Updated by xguo about 2 years ago
waynechen55 wrote:
xguo wrote:
xguo wrote:
cdywan wrote:
Apparently @xguo misunderstood Nick's request for help, only confirmed that the machines were no longer being used and suggests to ask infra to investigate network connectivity.
To be honest, I don't have enough permissions and experience to configure the assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn). Meanwhile, Just only do my best to check the situation of the assigned workers.
Quick update, currently, I have confirmed that the assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn) work very well on boot_from_pxe test module now.
grenache-1:17 (kermit)
https://openqa.suse.de/tests/9752953openqaworker2:17 (quinn)
https://openqa.suse.de/tests/9752361Next, do more validation run both assigned worker: grenache-1:17 (kermit) and openqaworker2:17 (quinn) together on our OSD environment, if there was not any more the same problem for the assigned workers again, plan to create a new MR to active them.
@nicksinger would you mind giving me some details about reset bios|flash for grenache-1:17 (kermit) and openqaworker2:17 (quinn) - Supermicro test machines as your mentioned.
Meanwhile, quick update, for now, I just only reproduce the same problem in 1/10 times both worker grenache-1:17 (kermit) and openqaworker2:17 (quinn).
Reproduce the same problem in 1/10 time as below:
https://openqa.suse.de/tests/9768087Please refer to the following url for more details:
https://openqa.suse.de/admin/workers/603
https://openqa.suse.de/admin/workers/1248Next, create a new MR to enable worker grenache-1:17 (kermit) and openqaworker2:17 (quinn)
https://gitlab.suse.de/openqa/salt-pillars-openqa/-/merge_requests/448@xguo @nicksinger @okurz Any follow-up actions on these two machines/workers ? Although I said "we can have a try" in this mr, I agree with Oliver that 10% percentage is not a small value (although this might be the result of limited times of experiment). Root cause for this issue should be identified and fixed which is the best. But, at the same time, virtualization lost two machines to run tests. It is not a very big problem if clock is not ticking. So could we come up with a plan or schedule to have this fixed in any event ?
To be honest, this problem of these two machines/workers is still not resolved now. we still do not make sure if the same produce still reproduce after enabled these two machines/workers on OSD. Depend on current situation, we still do not make sure how to reset bios|flash for grenache-1:17 (kermit) and openqaworker2:17 (quinn) as Nick's mentioned. Meanwhile, these two machines/workers were old Supermicro test machines now. Means that there is the risk to reset bios|flash for grenache-1:17 (kermit) and openqaworker2:17 (quinn). @nicksinger @okurz would you mind give us some ideas and comments for this ticket? thanks.
Updated by Julie_CAO about 2 years ago
My recent tests runing on these machines look good. I suggest add them back to OSD worker pool.
https://openqa.suse.de/admin/workers/1248
Updated by okurz about 2 years ago
xguo wrote:
@xguo @nicksinger @okurz Any follow-up actions on these two machines/workers ? Although I said "we can have a try" in this mr, I agree with Oliver that 10% percentage is not a small value (although this might be the result of limited times of experiment). Root cause for this issue should be identified and fixed which is the best. But, at the same time, virtualization lost two machines to run tests. It is not a very big problem if clock is not ticking. So could we come up with a plan or schedule to have this fixed in any event ?
To be honest, this problem of these two machines/workers is still not resolved now. we still do not make sure if the same produce still reproduce after enabled these two machines/workers on OSD. Depend on current situation, we still do not make sure how to reset bios|flash for grenache-1:17 (kermit) and openqaworker2:17 (quinn) as Nick's mentioned. Meanwhile, these two machines/workers were old Supermicro test machines now. Means that there is the risk to reset bios|flash for grenache-1:17 (kermit) and openqaworker2:17 (quinn). @nicksinger @okurz would you mind give us some ideas and comments for this ticket? thanks.
I agree with all of your points. This is why this ticket is on the backlog of the SUSE QE Tools team. The ticket has priority "High" meaning that at least an update should happen once every 30 days. As many members of the SUSE QE Tools team are more experts in software development this can be a reason why there is no quick follow-up. Of course you are welcome to try the mentioned steps yourself as updating/resetting firmware config and configuring and testing the network can all be done remotely anyway.
Updated by xguo about 2 years ago
okurz wrote:
xguo wrote:
@xguo @nicksinger @okurz Any follow-up actions on these two machines/workers ? Although I said "we can have a try" in this mr, I agree with Oliver that 10% percentage is not a small value (although this might be the result of limited times of experiment). Root cause for this issue should be identified and fixed which is the best. But, at the same time, virtualization lost two machines to run tests. It is not a very big problem if clock is not ticking. So could we come up with a plan or schedule to have this fixed in any event ?
To be honest, this problem of these two machines/workers is still not resolved now. we still do not make sure if the same produce still reproduce after enabled these two machines/workers on OSD. Depend on current situation, we still do not make sure how to reset bios|flash for grenache-1:17 (kermit) and openqaworker2:17 (quinn) as Nick's mentioned. Meanwhile, these two machines/workers were old Supermicro test machines now. Means that there is the risk to reset bios|flash for grenache-1:17 (kermit) and openqaworker2:17 (quinn). @nicksinger @okurz would you mind give us some ideas and comments for this ticket? thanks.
I agree with all of your points. This is why this ticket is on the backlog of the SUSE QE Tools team. The ticket has priority "High" meaning that at least an update should happen once every 30 days. As many members of the SUSE QE Tools team are more experts in software development this can be a reason why there is no quick follow-up. Of course you are welcome to try the mentioned steps yourself as updating/resetting firmware config and configuring and testing the network can all be done remotely anyway.
Great, got it. try to update bios of these two machines/workers remotely.
@okurz, quick update, I try to update the latest BIOS(v3.2) for grenache-1:17 (kermit) and openqaworker2:17 (quinn) - supermicro X10DRW-i.
Found that there need to be activated license firstly before updating BIOS version for grenache-1:17 (kermit) and openqaworker2:17 (quinn) together.
Supermicro Update Manager (SUM)
$ ./sum -i sp.kermit.qa.suse.de -U ADMIN -p XX -c UpdateBios --file /home/xguo/Downloads/X10DRW9_B22/UEFI/X10DRW9.B22 -v --journal_level 6
Supermicro Update Manager (for UEFI BIOS) 2.9.0 (2022/08/04) (x86_64)
Copyright(C) 2013-2022 Super Micro Computer, Inc. All rights reserved.
Journal created:
/home/xguo/journal/supermicro/sum/journal.txt
/home/xguo/journal/supermicro/sum/sum_journal_2022-11-07_15-53-19.core
Check node product key activation of the managed system
********************************<<<<<ERROR>>>>>*********************************
ExitCode = 80
Description = Node product key is not activated.
Program Error Code = 622.13
Error message:
One of the node product key (SFT-OOB-LIC or SFT-DCMS-SINGLE) should be
activated to execute this task.
SFT-DCMS-SINGLE node product key is not activated.
SFT-OOB-LIC node product key is not activated.
********************************************************************************
Would you mind helping me make sure who can give me the activate license for grenache-1:17 (kermit) and openqaworker2:17 (quinn) together. thanks
Updated by xguo about 2 years ago
- File activate_license_01.png activate_license_01.png added
- File activate_license_02.png activate_license_02.png added
Required activate license to update BIOS from grenache-1:17 (kermit) BMC Web.
Please refer to the attachments for more details.
Updated by mkittler about 2 years ago
I'm not sure whether anybody in the tools team will be able to help with the licensing problem.
Updated by waynechen55 about 2 years ago
- File Selection_109.png Selection_109.png added
@xguo It seems license can be ordered online at Supermicro estore: https://store.supermicro.com/software.html
Updated by xguo about 2 years ago
waynechen55 wrote:
@xguo It seems license can be ordered online at Supermicro store: https://store.supermicro.com/software.html
Awesome, got it. it is so helpful to us.
Updated by xguo about 2 years ago
Quick update, have updated the latest Firmware Revision: 03.89 and BIOS Version: 3.2 both grenache-1:17 (kermit) and openqaworker2:17 (quinn) successfully together now.
Let's see what happens next
Updated by xlai about 2 years ago
xguo wrote:
Quick update, have updated the latest Firmware Revision: 03.89 and BIOS Version: 3.2 both grenache-1:17 (kermit) and openqaworker2:17 (quinn) successfully together now.
Let's see what happens next
@xguo Hi Leon, would you please give an update about this issue? Still reproduce after upgrading firmware and bios?
Updated by xguo about 2 years ago
@xlai short update, after updated the latest Firmware and BIOS Version both grenache-1:17 (kermit) and openqaworker2:17 (quinn) successfully, confirmed that the same problem do not reproduce again any more.
@okurz, would you mind helping us update ticket as RESOLVED. thanks
FYI.
If the same problem reproduce both grenache-1:17 (kermit) and openqaworker2:17 (quinn) again, will reopen this ticket.
Updated by okurz about 2 years ago
- Status changed from Workable to Resolved
- Assignee set to xguo
xguo wrote:
@xlai short update, after updated the latest Firmware and BIOS Version both grenache-1:17 (kermit) and openqaworker2:17 (quinn) successfully, confirmed that the same problem do not reproduce again any more.
this is great news. Thanks a lot.
@okurz, would you mind helping us update ticket as RESOLVED. thanks
done