action #47417
closed[functional][u][svirt-xen] test fails in dracut - no serial output even though command returns 0
Added by dheidler about 5 years ago. Updated almost 5 years ago.
0%
Description
Observation¶
openQA test in scenario extra_tests_in_textmode fails in
dracut
Reproducible¶
Fails since (at least) Build 0112
Expected result¶
Last good: https://openqa.suse.de/tests/2410341
Further details¶
Always latest result in this scenario: latest
This looks like a problem with the serial terminal.
Suggestions¶
- Check what's the required parameter for serial_terminal to behave correctly for svirt backend
- Unschedule the test if VIRTIO=1 is not set
Updated by okurz about 5 years ago
- Assignee set to dheidler
- Priority changed from Normal to Urgent
Please update scenario name and last good
Updated by dheidler about 5 years ago
- Description updated (diff)
- Status changed from New to Workable
- Target version set to Milestone 23
Updated by okurz about 5 years ago
As discussed in planning: Please find related tickets as we assume they are more tickets for "serial terminal" problems. If we find that retriggering is a valid workaround or the problem is limited to only limited scenarios then we can reduce the priority to "High" or even "Normal".
Updated by szarate about 5 years ago
- Status changed from Workable to In Progress
- Assignee set to szarate
Picking it up as agreed... quickly searching couldn't find the related problems with wait_serial
Updated by szarate about 5 years ago
- Description updated (diff)
- Status changed from In Progress to Feedback
- Priority changed from Urgent to Normal
Long story short:
https://openqa.suse.de/tests/2450422#step/dracut/6 tries to select serial terminal, but is running on svirt-xen-hvm backend, however the test seems to be intended to work with VIRTIO=1 which I'm not sure the svirt/xen backend support, serial_terminal has support for this kind of scenarios. Same test is passing for x86 scenarios:
https://openqa.suse.de/tests/2450399#step/dracut/26
I will try with suggestion #2 later today, and will lower the urgency, I don't believe that it's urgent anymore, since it passes on other scenarios
Updated by szarate about 5 years ago
- Status changed from Feedback to Workable
- Assignee deleted (
szarate)
Setting back to workable, I think It will take a bit longer :)
Updated by szarate about 5 years ago
- Related to action #46895: [qam] test fails in dracut - output not matched on 15SP1 added
Updated by okurz about 5 years ago
- Subject changed from [functional][u] test fails in dracut - no serial output even though command returns 0 to [functional][u][svirt-xen] test fails in dracut - no serial output even though command returns 0
back to "High" as used as a label for currently failing tests
Updated by okurz about 5 years ago
- Copied to action #48251: [qam] test fails in dracut to match no output including "dracut -f" but the found output looks like what we expect added
Updated by okurz about 5 years ago
I think the dracut test module was recently moved into a dedicated "extratests" group so I suggest to crosscheck the current fail ratio on production based on previously running jobs and see how severe the issue still is.
Updated by mgriessmeier about 5 years ago
- Blocked by action #47123: [functional][u][tw] extra_tests_in_textmode fails in zbar added
Updated by mgriessmeier about 5 years ago
- Status changed from Workable to Blocked
Updated by mgriessmeier about 5 years ago
- Status changed from Blocked to Workable
- Target version changed from Milestone 23 to Milestone 24
blocker resolved, moving to M24 as workable
Updated by zluo about 5 years ago
- Status changed from Workable to In Progress
- Assignee set to zluo
take over and check.
Updated by zluo about 5 years ago
dracut has been disabled atm, so trying to check test on last build of sles 12:
Updated by zluo about 5 years ago
http://f40.suse.de/tests/3348#step/dracut/47 shows no issue for x86_64.
Updated by zluo about 5 years ago
Updated by zluo about 5 years ago
it seems we have problem with svirt-xen worker on osd. It is running for 2 hours...
Updated by zluo about 5 years ago
https://github.com/os-autoinst/os-autoinst-distri-opensuse/pull/7245 for testing on osd.
Updated by zluo about 5 years ago
https://openqa.suse.de/tests/2801515 shows following issue:
[2019-04-12T10:11:30.724 CEST] [debug] output does not pass the code block:
[2019-04-12T10:11:30.828 CEST] [debug] output not validating at /var/lib/openqa/pool/12/os-autoinst-distri-opensuse/tests/console/dracut.pm line 28.¶
validate_script_output("dracut -f", sub { m/.*Executing: \/usr\/bin\/dracut -f\n|\b(?:Skipping|Including modules done|Including|Creating image|Creating initramfs)\b/ }, 180);
this command doesn't any trouble on x86_64.
and dracut --list-modules even not triggered afterwards:
validate_script_output("dracut --list-modules", sub { m/.*Executing: \/usr\/bin\/dracut --list-modules\n(\w+|\n|-|d+)+/ });
I think the reason is that SUT is busy (system I/O): busy
https://openqa.suse.de/tests/2801515#step/dracut/31
Updated by zluo about 5 years ago
https://openqa.suse.de/tests/2802493 shows same failure as before.
Updated by zluo about 5 years ago
checked the history of https://progress.opensuse.org/issues/47123.
comment#40
The 'extra_tests_dracut' has been added to all scenario
--
In main_commom.pm we have already:
sub load_extra_tests_dracut {
loadtest "console/dracut";
}
Updated by zluo about 5 years ago
- Status changed from In Progress to Feedback
https://openqa.suse.de/tests/2802456 (Maintance QA only)
According to information from pstivanin, dracut test module is unstable and breaks other tests, so it got removed from extra_tests.
Let's talk about this in a meeting how we to handle it.
Updated by zluo about 5 years ago
- Status changed from Feedback to Workable
- Priority changed from High to Normal
Updated by zluo about 5 years ago
- Status changed from Workable to In Progress
give a try for adding post_fail_hook and add force_scheduled_tasks and cleanup_before_shutdown to see if we still have problem with system I/O: busy.
Updated by zluo about 5 years ago
Updated by zluo about 5 years ago
- Status changed from In Progress to Workable
- Assignee deleted (
zluo) - Priority changed from Normal to High
https://openqa.suse.de/tests/2807621#step/dracut/12 shows same issue as before. And I'm pretty sure that SUT was not able to execute command after initramfs image created because system I/O becomes busy.
Please let's discuss this ticket and find a good to solve the issue.
Updated by zluo about 5 years ago
- Assignee changed from zluo to michalnowak
Michal, how do you think about this ticket? Do we really need to test dracut on svirt-xen?
dracut is covered in tests from QA Maintance now.
Updated by michalnowak about 5 years ago
- Assignee changed from michalnowak to zluo
This is not about Xen, but about the test having wrong assumption about where the output from dracut goes. dracut writes its output to stderr, but validate_script_output() seems to check stdout (which is empty in this case). Serial terminal seems to do some sort of "magic" to merge stderr and stdout, so it works there.
The easy fix is to run dracut like this: dracut -f 2>&1.
Updated by zluo about 5 years ago
- Status changed from Workable to In Progress
then trying dracut -f 2>& in validate_script_output.
Updated by zluo about 5 years ago
to check https://openqa.suse.de/t2814270
and later:
https://openqa.suse.de/tests/2814438
Updated by zluo about 5 years ago
https://openqa.suse.de/tests/2814438#step/dracut/36 shows successful test run.
Updated by zluo about 5 years ago
http://f40.suse.de/tests/3368 shows that this change is working fine for extra_tests_in_textmode@64bit
Updated by zluo about 5 years ago
PR created:
https://github.com/os-autoinst/os-autoinst-distri-opensuse/pull/7293
The question is still: should we add dracut back to sle functional extra_test?
Updated by SLindoMansilla almost 5 years ago
- Status changed from Feedback to Workable
PR merged. Waiting for follow up ticket. Please, add the new ticket as related to this ticket. Feel free to resolve this ticket.
Updated by zluo almost 5 years ago
- Copied to action #51023: [sle][functional][u] take dracut back in functional tests added
Updated by zluo almost 5 years ago
- Status changed from Workable to Resolved
follow-up ticket created:
https://progress.opensuse.org/issues/51023
the test itself is working fine:
https://openqa.suse.de/tests/2814438
Set is now as resolved.