QA

I crosschecked the machine connections and updated racktables. The fibre channel connection is correct as documented in racktables, eth0 in OS is for the physical port SFP+-1. On the DHCP server no request shows up for this network interface. I assume the switch is not configured correctly yet for the SFP port.

This is the only workable subtask of #121720 which is a High ticket on the backlog. We should consider having this on the backlog.

livdywan wrote in #note-14:

This is the only workable subtask of #121720 which is a High ticket on the backlog. We should consider having this on the backlog.

you are incorrectly reading the ticket dependencies. #121720 is High because of other subtasks so this ticket does not have a direct impact. In fact adding this to the backlog would actually increase the risk that the High blocking sibling subtasks are less likely to be worked on.

I enabled IPv6 on openqaworker-arm-1 and created https://gitlab.suse.de/OPS-Service/salt/-/merge_requests/4936 to add the AAAA record

I followed the guide https://progress.opensuse.org/projects/openqav3/wiki/#Distribution-upgrades, after checked with Marius that https://gitlab.suse.de/openqa/salt-pillars-openqa/-/blob/master/openqa/workerconf.sls and https://gitlab.suse.de/search?search=openqaworker-arm-1%20&nav_source=navbar&project_id=419&group_id=8&search_code=true&repository_ref=production are setup in place.
I didnt the minimal modifications which vimdiff shows, accepting mostly the old configs.
systemctl --failed shows no errors
I had to update the /etc/hosts and after systemctl unmask openqa-worker-auto-restart@11.service openqa-reload-worker-auto-restart@11.{service,path}
systemctl start openqa-worker-auto-restart@11.service openqa-reload-worker-auto-restart@11.path, I cloned a job[0] which run successfully

the file /etc/sysctl.d/99-poo81198.conf shows that IPv6 is disabled. I recommend to read the referenced ticket 81198 and consider removing this file and getting IPv6 fixed first.

i didnt find that file. However i updated the /etc/hosts with ipv6 i found from another worker.
However Oli has already did enable ipv6 and submitted https://gitlab.suse.de/OPS-Service/salt/-/merge_requests/4936/diffs

I used 2a07:de40:b203:12:0:ff:fe4f:7c2b but the PR uses 2a07:de40:a102:5:1e1b:dff:fe68:7ecf

[0] https://openqa.suse.de/tests/13839219

ybonatakis wrote in #note-22:

I followed the guide https://progress.opensuse.org/projects/openqav3/wiki/#Distribution-upgrades, after checked with Marius that https://gitlab.suse.de/openqa/salt-pillars-openqa/-/blob/master/openqa/workerconf.sls and https://gitlab.suse.de/search?search=openqaworker-arm-1%20&nav_source=navbar&project_id=419&group_id=8&search_code=true&repository_ref=production are setup in place.
I didnt the minimal modifications which vimdiff shows, accepting mostly the old configs.
systemctl --failed shows no errors
I had to update the /etc/hosts and after systemctl unmask openqa-worker-auto-restart@11.service openqa-reload-worker-auto-restart@11.{service,path}
systemctl start openqa-worker-auto-restart@11.service openqa-reload-worker-auto-restart@11.path, I cloned a job[0] which run successfully

the file /etc/sysctl.d/99-poo81198.conf shows that IPv6 is disabled. I recommend to read the referenced ticket 81198 and consider removing this file and getting IPv6 fixed first.

i didnt find that file. However i updated the /etc/hosts with ipv6 i found from another worker.
However Oli has already did enable ipv6 and submitted https://gitlab.suse.de/OPS-Service/salt/-/merge_requests/4936/diffs

I used 2a07:de40:b203:12:0:ff:fe4f:7c2b but the PR uses 2a07:de40:a102:5:1e1b:dff:fe68:7ecf

7c2b is osd, 7cef is openqaworker-arm-1 itself

https://gitlab.suse.de/OPS-Service/salt/-/merge_requests/4936 merged and effective. ping openqaworker-arm-1.qe.nue2.suse.org yields 2a07:de40:a102:5:1e1b:dff:fe68:7ec7

https://gitlab.suse.de/openqa/salt-pillars-openqa/-/merge_requests/750

update openqa keys to the worker. CLASS should be fine