action #115919
open[security] test fails in tpm2_measured_boot
Added by punkioudi over 2 years ago. Updated 9 months ago.
50%
Description
ls: cannot access '/sys/kernel/security/tpm0/binary_bios_measurements': No such file or directory
It fails only in aarch64 and passes fine in x86_64, so either it is a product bug, either the path has changed for aarch64? (which doesn't make much sense :P )
Acceptance Criteria¶
- Identify if it is a product bug
- If it is a bug, open a bugzilla ticket under
SUSE Linux Enterprise Server 15 SP5
- If it is a test issue, adjust the test accordingly and run Verification runs.
Observation¶
openQA test in scenario sle-15-SP5-Online-aarch64-security_tpm2_swtpm@aarch64 fails in
tpm2_measured_boot
Test suite description¶
The base test suite is used for job templates defined in YAML documents. It has no settings of its own.
Reproducible¶
Fails since (at least) Build 15.2 (current job)
Expected result¶
Last good: (unknown) (or more recent)
Further details¶
Always latest result in this scenario: latest
Updated by pstivanin over 2 years ago
- Status changed from New to In Progress
- Assignee set to pstivanin
Updated by pstivanin over 2 years ago
It fails also on 15-SP3 and 15-SP4 for aarch64. Looking into it.
Updated by pstivanin over 2 years ago
That's weird. I've downloaded the qcow2 (https://openqa.suse.de/tests/9411670#settings) and booted it using the aarch64 emulator. I then went through the setup phase (https://openqa.suse.de/tests/9411670/modules/tpm2_env_setup/steps/1/src) and the test phase (https://openqa.suse.de/tests/9411671/modules/tpm2_measured_boot/steps/1/src), and I'm getting a diff in the latter.
When executing ls /sys/kernel/security/tpm0/binary_bios_measurements
, on openqa we get:
ls: cannot access '/sys/kernel/security/tpm0/binary_bios_measurements': No such file or directory
while locally I get:
/sys/kernel/security/tpm0/binary_bios_measurements
Updated by pstivanin over 2 years ago
There are no packages diff between the old green 151.1 (https://openqa.suse.de/tests/8752505#step/tpm2_env_setup/30) and the new red (https://openqa.suse.de/tests/9412083#step/tpm2_env_setup/3) tests.
Updated by pstivanin over 2 years ago
I've used the developer mode to look around the vm, and I couldn't see any notable difference compared to my local setup. E.g., /proc/cmdline
and /proc/cpuinfo
were identical.
One diff I see compared to my local emulated vm is from dmesg. On the openqa vm I see:
tpm tpm0: A TPM error (256) occurred attempting the self test
Updated by pstivanin over 2 years ago
I've created a vm in the arm4 hypervisor, imported the qcow2 from the test and executed it.
# ls /sys/kernel/security/tpm0/
binary_bios_measurements
Everything is OK and works as supposed. I'm now thinking that there is some kind of misconfiguration in openqa somewhere.
Updated by pstivanin over 2 years ago
The measurement file is not created because in openqa the selftest fails.
[ 17.094738] tpm tpm0: A TPM error (256) occurred attempting the self test
[ 17.100985] tpm tpm0: starting up the TPM manually
This is not happening anywhere else, just in openqa. Wonder why...
Updated by pstivanin over 2 years ago
Test is working fine on both Leap-aarch64 (https://openqa.opensuse.org/tests/2585650) and TW-aarch64 (https://openqa.opensuse.org/tests/2567304) ...
Updated by pstivanin over 2 years ago
These are the packages diff between 151.1 and today:
today:
openssl3/libopenssl3/libopenssl-3-devel -> 3.0.1-150400.4.7.1
libpcre16/libpcrecpp0/libpcreposix0/pcre-devel -> 0-8.45-150000.20.13.1
glibc-devel-2.31-150300.37.1
libmount-devel/libblkid-devel -> 2.37.2-150400.8.3.1
libcurl-devel -> 7.79.1-150400.5.6.1
zlib-devel -> 1.2.11-150000.3.33.1
151.1:
openssl3/libopenssl3/libopenssl-3-devel -> 3.0.1-150400.2.4
libpcre16/libpcrecpp0/libpcreposix0/pcre-devel -> 0-8.45-20.10.1
glibc-devel -> 2.31-150300.20.7
libmount-devel/libblkid-devel -> 2.37.2-150400.6.26
libcurl-devel -> 7.79.1-150400.3.1
zlib-devel -> 1.2.11-150000.3.30.1
Updated by pstivanin over 2 years ago
It's not a regression, because Build15.2 is using the same packages as Leap, and on Leap the test is green.
The jobgroups are the same, the code is the same.
Updated by pstivanin over 2 years ago
So I was to get the installed packages on both osd-arm3 and o3-aarch64, and they have the same exact packages installed. Same package and build version.
Updated by pstivanin over 2 years ago
found the culprit thanks to Fabian!
qemu-uefi-aarch64 differs on OSD and O3:
- o3:
202008-150300.10.15.1
- osd:
202008-10.8.1
That's because someone locked those packages:
# salt 'openqaworker-arm-3.suse.de' cmd.run 'zypper ll'
openqaworker-arm-3.suse.de:
# | Name | Type | Repository | Comment
--+-------------------+---------+------------+--------
1 | qemu-ovmf-x86_64 | package | (any) |
2 | qemu-uefi-aarch64 | package | (any) |
Updated by pstivanin over 2 years ago
Why the locks: https://progress.opensuse.org/issues/111992
Updated by pstivanin over 2 years ago
- Status changed from In Progress to Blocked
- % Done changed from 0 to 50
Blocked until the locks can be removed and the packages can be updated.
Updated by pstivanin about 2 years ago
Updated by pstivanin about 2 years ago
Ticket still blocked due to the above issue(s).
Updated by pstivanin about 2 years ago
Still blocked by https://bugzilla.opensuse.org/show_bug.cgi?id=1204067
Updated by pstivanin almost 2 years ago
still blocked by https://progress.opensuse.org/issues/114523
Updated by tjyrinki_suse almost 2 years ago
- Has duplicate action #123682: [security] aarch64 Failed to connect to '/tmp/mytpm12/swtpm-sock': Connection refused added
Updated by tjyrinki_suse almost 2 years ago
- Has duplicate action #124011: [security] test fails in tpm2_measured_boot added
Updated by pstivanin over 1 year ago
- Assignee set to pstivanin
still blocked by https://bugzilla.opensuse.org/show_bug.cgi?id=1204067
Updated by tjyrinki_suse over 1 year ago
- Status changed from Blocked to Workable
That bug is now claimed to be verified fix. However, the test still fails as before.
Updated by pstivanin over 1 year ago
- Status changed from Workable to In Progress
Updated by pstivanin over 1 year ago
Test is failing because there are still some locks (https://progress.opensuse.org/issues/111992#note-68) :
pstivanin@openqa:~> sudo salt 'openqaworker-arm-3.suse.de' cmd.run 'zypper ll'
openqaworker-arm-3.suse.de:
# | Name | Type | Repository | Comment
--+-------------------+---------+------------+-----------
1 | qemu-ovmf-x86_64 | package | (any) | poo#116812
2 | qemu-uefi-aarch64 | package | (any) |
Updated by pstivanin over 1 year ago
- Status changed from In Progress to Blocked
Updated by pstivanin over 1 year ago
Updated by tjyrinki_suse over 1 year ago
- Blocked by action #114523: Deal with QEMU and OVMF default resolution being 1280x800, affecting (at least) qxl, but on aarch64 size:M added
Updated by tjyrinki_suse over 1 year ago
- Blocked by action #116812: [qe-core] Leap 15.5 uefi console switch fail size:M added
Updated by pstivanin over 1 year ago
- Has duplicate action #134402: [security] [aarch64] [15sp6] test fails in tpm2_measured_boot added
Updated by pstivanin about 1 year ago
- Assignee deleted (
pstivanin)
unassigning myself until the blocking issues are fixed