QA » openQA Project » openQA Infrastructure

All workers on powerqaworker-qam-1 are offline on OSD. We could see that from: https://openqa.suse.de/admin/workers

Cannot ping it, ipmitool works well.

checked the network, the result shows that:

/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: enP1p3s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq qlen 1000
    link/ether 6c:ae:8b:69:21:74 brd ff:ff:ff:ff:ff:ff
3: enP1p3s0f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 6c:ae:8b:69:21:75 brd ff:ff:ff:ff:ff:ff
4: enP1p3s0f2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 6c:ae:8b:69:21:76 brd ff:ff:ff:ff:ff:ff
5: enP1p3s0f3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 6c:ae:8b:69:21:77 brd ff:ff:ff:ff:ff:ff
6: enP3p9s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 6c:ae:8b:69:20:20 brd ff:ff:ff:ff:ff:ff
7: enP3p9s0f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 6c:ae:8b:69:20:21 brd ff:ff:ff:ff:ff:ff
8: enP3p9s0f2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 6c:ae:8b:69:20:22 brd ff:ff:ff:ff:ff:ff
9: enP3p9s0f3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 6c:ae:8b:69:20:23 brd ff:ff:ff:ff:ff:ff
10: tunl0@NONE: <NOARP> mtu 1480 qdisc noop qlen 1
    link/ipip 0.0.0.0 brd 0.0.0.0
/ # ethtool enP1p3s0f0
Settings for enP1p3s0f0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Half 1000baseT/Full 
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Half 1000baseT/Full 
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Speed: Unknown!
        Duplex: Unknown! (255)
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: Unknown
        Supports Wake-on: g
        Wake-on: g
        Current message level: 0x000000ff (255)
                               drv probe link timer ifdown ifup rx_err tx_err
        Link detected: no
/ # SOL session closed by BMC

cable is unplugged?