action #71806
closed
[aarch64][opensuse] Tests on `aarch64_lse_smp4` machine are 2x slower since snapshot 20200911
Added by ggardet_arm over 3 years ago.
Updated almost 3 years ago.
Description
Tests on aarch64_lse_smp4 machine are 2x slower since snapshot 20200911.
- Description updated (diff)
The ISO are gone, so we cannot restart an old test from 20200911 snapshot.
- Description updated (diff)
I tried:
- older
qemu-uefi-aarch64 => no change
- kernel 5.8.4 (vs 5.8.7) => no change
The autoinst-log.txt contains a number of warnings similar to:
[2020-09-23T18:41:59.058 GMT] [debug] WARNING: check_asserted_screen took 13.10 seconds for 20 candidate needles - make your needles more specific
[2020-09-23T18:41:59.065 GMT] [debug] WARNING: There is some problem with your environment, we detected a stall for 13.6040179729462 seconds
Starting qemu outside os-autoinst is also slow.
I tried kernel 5.7.11, no changes.
- Description updated (diff)
Tried qemu 5.0.0 => no change. I am wondering if the change is not outside the OS (firmware or hardware).
- Priority changed from High to Normal
Lower prio since we now have an M6g machine to run LSE-enabled tests.
- Subject changed from Tests on `aarch64_lse_smp4` machine are 2x slower since snapshot 20200911 to [aarch64][opensuse] Tests on `aarch64_lse_smp4` machine are 2x slower since snapshot 20200911
- Priority changed from Normal to Low
I tried latest kernel 5.3 from Leap 15.2, with no improvement.
- Category set to Infrastructure
- Status changed from New to Closed
Machine has been retired.
Also available in: Atom
PDF