action #167078
closed
[tools][qe-core]powervm-hmc, netboot failed due to wrong server ip configured
Added by rfan1 about 1 month ago.
Updated about 1 month ago.
Category:
Bugs in existing tests
Description
Description¶
For redcurrant-1 to redcurrant-8 which are used for openQA tests, seems IP configuration is not correct.
server IP = 10.145.10.21
We may need to change it to server IP = 10.145.10.78
Observation¶
openQA test in scenario sle-15-SP7-Online-ppc64le-default@ppc64le-hmc fails in
bootloader
Test suite description¶
Maintainer: QE Core
The standard scenario where we mainly just follow installation suggestions without any adjustments.
Reproducible¶
Fails since (at least) Build 10.1
Expected result¶
Last good: (unknown) (or more recent)
Further details¶
Always latest result in this scenario: latest
- Priority changed from Normal to High
- Target version set to Ready
- Due date set to 2024-10-04
- Status changed from New to Feedback
- Assignee set to okurz
@rfan1 I think you can change the IP in the SMS of each LPAR. 10.145.10.78 is correct as that is the primary DHCP server in the domain oqa.prg2.suse.org. Can you try yourself?
okurz wrote in #note-4:
@rfan1 I think you can change the IP in the SMS of each LPAR. 10.145.10.78 is correct as that is the primary DHCP server in the domain oqa.prg2.suse.org. Can you try yourself?
Sure thing!
- Assignee changed from okurz to tinawang123
As discussed offline, Yutao will pick up this ticket.
- change the server ip to
10.145.10.78
- run bootp test to make sure pxe request can work
Does it work with server IP 0.0.0.0 ?
michals wrote in #note-7:
Does it work with server IP 0.0.0.0 ?
I tried it. It cannot work:
BOOTP Parameters: ¶
chosen-network-type = ethernet,auto,rj45,auto
server IP = 0.0.0.0
client IP = 10.145.10.231
gateway IP = 10.145.10.254
device = /vdevice/l-lan@30000002
MAC address = f6 6b 42 ad 2e 02
loc-code = U9008.22L.788201A-V7-C2-T1
BOOTP request retry attempt: 1
BOOTP request retry attempt: 2
BOOTP request retry attempt: 3
BOOTP request retry attempt: 4
....
- Status changed from Feedback to Resolved
Finished update redcurrant-1 to 8
With server IP 0.0.0.0 all the parameters should be 0 as well. That should work so long as the server is in the same subnet or there is a DHCP proxy.
michals wrote in #note-11:
With server IP 0.0.0.0 all the parameters should be 0 as well. That should work so long as the server is in the same subnet or there is a DHCP proxy.
Seems donen't work:
BOOTP Parameters:
----------------
chosen-network-type = ethernet,auto,rj45,auto
server IP = 0.0.0.0
client IP = 0.0.0.0
gateway IP = 0.0.0.0
device = /vdevice/l-lan@30000002
MAC address = f6 6b 42 ad 2e 02
loc-code = U9008.22L.788201A-V7-C2-T1
BOOTP request retry attempt: 1
BOOTP request retry attempt: 2
BOOTP broadcast not working sounds like something that should be debugged, eventually.
Also available in: Atom
PDF