QA (public) » openQA Project (public) » openQA Infrastructure (public)

two thumb drives are connected. I disabled the openQA worker instance on imagetester with

sudo systemctl stop openqa-worker@5
sudo systemctl mask --now openqa-worker@5

I powered on the machine over IPMI to check if USB devices show up.

The machine is
supermicro X10DRW-i rev 3.2

BIOS is the latest with https://www.supermicro.com/en/support/resources/downloadcenter/firmware/MBD-X10DRW-i/BIOS

currently installed is SL Micro. Did transactional-update pkg in usbutils && reboot and after reboot called from local

ssh_nt -4 root@scooter-1.qe.nue2.suse.org "lsusb"

and saw

Bus 001 Device 002: ID 8087:8002 Intel Corp. 8 channel internal hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:800a Intel Corp. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 058f:6387 Alcor Micro Corp. Flash Drive
Bus 003 Device 003: ID 413c:2113 Dell Computer Corp. KB216 Wired Keyboard
Bus 003 Device 006: ID 0557:2419 ATEN International Co., Ltd Virtual mouse/keyboard device
Bus 003 Device 005: ID 0557:7000 ATEN International Co., Ltd Hub
Bus 003 Device 002: ID abcd:1234 LogiLink UDisk flash drive
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

with two flash drives. I don't see how they should not be compatible.

Also https://openqa.suse.de/tests/14745837#step/usb_install/10 shows the complete disk info and then https://openqa.suse.de/tests/14745837#step/usb_install/24 shows that provisioning is done on sdd which is a SDD so I assume the test code and settings are wrong causing the wrong device to be selected.

@nanzhang can you please look into which device is connected and ensure that proper USB thumbdrives are seleted?

ok. As there already is #163070 I assume we can close this ticket here then.