Project

General

Profile

Actions
Copy link

action #132902

closed

Check and document PDU connection of nibali.qe.nue2.suse.org

Added by nicksinger 9 months ago. Updated 9 months ago.

Status:
Resolved
Priority:
Low
Assignee:
okurz
Category:
-
Target version:
openQA Project - Ready
Start date:
2023-07-17
Due date:
% Done:

0%

Estimated time:
Tags:
infra, next-office-day, next-frankencampus-visit

Description

Due to https://progress.opensuse.org/issues/132860 I realized that "openqa raspberry pi hw worker PDU" has a comment stating that it is connected to A20 of "PDU-FC-B2". However according to racktables, nibali is connected to port 20. I just tried it and saw that our Pi setup is indeed connected to port 20. This means the documentation of nibali.qe.nue2.suse.org is wrong and needs to be checked when in FC basement the next time.

Related issues 1 (0 open — 1 closed)

Related to openQA Infrastructure - action #132860: openqa-piworker is unstable and needs regular power-cycles size:MResolveddheidler2023-07-172024-02-27

Actions
Actions
Copy link
 #1

Updated by nicksinger 9 months ago

  • Copied from action #132860: openqa-piworker is unstable and needs regular power-cycles size:M added
Actions
Copy link
 #2

Updated by nicksinger 9 months ago

  • Assignee deleted (nicksinger)
Actions
Copy link
 #3

Updated by nicksinger 9 months ago

  • Copied from deleted (action #132860: openqa-piworker is unstable and needs regular power-cycles size:M)
Actions
Copy link
 #4

Updated by nicksinger 9 months ago

  • Related to action #132860: openqa-piworker is unstable and needs regular power-cycles size:M added
Actions
Copy link
 #5

Updated by okurz 9 months ago

  • Tags changed from next-office-day to next-office-day, next-frankencampus-visit, infra
  • Assignee set to okurz

Let's use "next-frankencampus-visit" to be precise :) I plan to be there on Thursday so I can take this

Actions
Copy link
 #6

Updated by okurz 9 months ago

Apparently someone is trying to mess with us. nibali was not connected. I now connected to A13 and switched A13 off. But I can't yet enter A13 in racktables as that is said to be connected to kernel-switch, which isn't true as kernel-switch is connected to A15. But I can't update that either because racktables says A15 is used by sonic+tails which isn't true because they are connected to A18, …

physical connections:
A19: coppi-down, merckx-down, A18: sonic-up+tails-up, A17: sonic-down+tails-down, A16: coppi-up+merckx-up, A15: kernel-switch, A14: pettigrew, A13: nibali, A: empty

Actions
Copy link
 #7

Updated by okurz 9 months ago

  • Status changed from New to Resolved

As nibali was unplugged but the network connections are to pantani I asked if the devices are actually needed to run so I wrote a message in https://suse.slack.com/archives/C02CANHLANP/p1689841460336849

@Petr Cervinka @Michael Moese @Sebastian Chlad the whole setup around pantani.qe.nue2.suse.org in https://racktables.nue.suse.com/index.php?object_id=17828&page=object&tab=default seems currently unused. Can we power it off over the remote controllable PDUs please?

The answer was by schlad that next week they plan to make use of the device again. So I guess it was good that I plugged in the switch. Though I powered it off over the PDU remote controllable outlet.

I updated all entries in racktables https://racktables.nue.suse.com/index.php?page=object&tab=ports&object_id=21043

Actions
Copy link

Also available in: Atom PDF