Project

General

Profile

Actions
Copy link

action #117625

closed

Fix IPMI connection to openqaworker1.suse.de size:M

Added by okurz about 2 years ago. Updated about 2 years ago.

Status:
Resolved
Priority:
Normal
Assignee:
dheidler
Category:
-
Target version:
openQA Project (public) - Ready
Start date:
Due date:
% Done:

0%

Estimated time:

Description

Motivation

When we moved openqaworker1 to the new QA lab it seems we never cared about the IPMI connection. We need to apply the right VLAN on the corresponding port qanet02nue.qa.suse.de port 31

Acceptance criteria

  • AC1: Engineering VLAN is available on the uplink
  • AC2: Downlink (qanet02nue.qa.suse.de port 31) is configured to use the corresponding VLAN

Workaround

As the machine currently receives an address within the QA-Net try ipmitool -I lanplus -C 3 -H 1b153.qa.suse.de or ipmitool -I lanplus -C 3 -H 10.162.30.153 or if all fails lookup the address on qanet ssh root@qanet "journalctl -u dhcpd | grep -i 'DHCPACK.*2C:60:0C:73:05:5A'"

Actions
Copy link
 #2

Updated by tinita about 2 years ago

  • Subject changed from Fix IPMI connection to openqaworker1.suse.de to Fix IPMI connection to openqaworker1.suse.de size:M
  • Description updated (diff)
  • Status changed from New to Workable
Actions
Copy link
 #3

Updated by okurz about 2 years ago

I connected the machine back to port 2 with the old cable and checked that this one is fine, it's just not in the right VLAN.

Actions
Copy link
 #4

Updated by dheidler about 2 years ago

IIRC, we already have the engeneering vlan available on that switches uplink.
So it should be sufficient to configure that port to the right vlan id.

Actions
Copy link
 #5

Updated by dheidler about 2 years ago

  • Assignee set to dheidler
Actions
Copy link
 #6

Updated by dheidler about 2 years ago

Other than this ticket suggests (but in line with racktables) the bmc of openqaworker1 is connected to port 25 of the qanet02nue.qa.suse.de switch.

I created VLAN 2 (engineering) on the switch and added the uplink LAG to VLAN 2 in tagged mode and port 25 to VLAN 2 in untagged mode.

Now openqaworker1-ipmi.suse.de is available again. I also crosschecked the MAC address as listed in racktables and it seems to be fine:

dheidler@wotan:~> /sbin/arp -a | grep -i 2C:60:0C:73:05:5A
openqaworker1-ipmi.suse.de (10.160.1.94) auf 2c:60:0c:73:05:5a [ether] auf eth0
Actions
Copy link
 #7

Updated by dheidler about 2 years ago

  • Status changed from Workable to Resolved
Actions
Copy link

Also available in: Atom PDF