QA (public) » openQA Project (public) » openQA Infrastructure (public)

Found out with mkittler that we can use IPMI to get and set this, e.g.

ipmi-openqaworker-arm-3-ipm chassis status | grep 'Power Restore Policy'

returns

Power Restore Policy : always-on

and we can set it with

ipmi-openqaworker-arm-3-ipmi chassis policy always-on

We should be able to just call that from each worker itself with sudo ipmitool chassis policy always-on, maybe from salt.

I found https://docs.saltproject.io/en/latest/ref/modules/all/salt.modules.ipmi.html#salt.modules.ipmi.set_power which needs a python module pyghmi and does not support a state so I guess we are better of if we control the commands ourselves.

I checked on openqaworker11 how expensive the operation is:

# time sh -c "ipmitool chassis status | grep 'Power Restore Policy.*always-on' || ipmitool chassis policy always-on"
Set chassis power restore policy to always-on

real    0m0.185s
user    0m0.100s
sys 0m0.033s
openqaworker11:/home/okurz # time sh -c "ipmitool chassis status | grep 'Power Restore Policy.*always-on' || ipmitool chassis policy always-on"
Power Restore Policy : always-on

real    0m0.095s
user    0m0.050s
sys 0m0.022s

so 95ms for a single check call, 185ms for the combined set operation. But salt is not meant to redo the command everytime but check a state. Probably a proper way would be a custom grain python function to check the state. I guess I will resort to the manual action and documenting on a wiki maybe?

Simulating setting "always-on" policy on all machines:

IFS=$'\n'; for i in $(sed 's/^alias .*="\(.*\)"/\1/' ~/.openqa_ipmi_aliases); do (eval "$i" chassis status | grep 'Power Restore Policy.*always-on' || echo eval "$i" chassis policy always-on); done

relying on https://gitlab.suse.de/openqa/salt-pillars-openqa/#get-ipmi-definition-aliases

likely "previous" is a better policy in case someone on purpose wants to power off the machines and only power them on one by one after e.g. some work on the electrical infrastructure. And some of our machines do not support the commands, e.g. PowerPC (with LPARs and such). So I guess we are better off with the manual for now. Checking current status:

IFS=$'\n'; for i in $(sed 's/^alias .*="\(.*\)"/\1/' ~/.openqa_ipmi_aliases); do echo "# $i" && eval "$i" chassis status | grep 'Power Restore Policy'; done

reveals a mixture of "previous, always-on, always-off". Setting "previous" on all:

IFS=$'\n'; for i in $(sed 's/^alias .*="\(.*\)"/\1/' ~/.openqa_ipmi_aliases); do eval "$i" chassis policy previous; done

Updated wiki https://progress.opensuse.org/projects/openqav3/wiki/Wiki#Remote-management-with-IPMI