QA (public) » QE-Workstation

Preparation:

1. Find suggested hardware in Desktop team:
       - HP ProBook 455 AMD/ATI radeon HD 8450G (integrated graphics card)                                                                                                      
       - HP ProBook 4540S AMD/ATI Thames [Radeon HD 7550M/7570M/7650M]
       - HP ProBook 6560b AMD/ATI radeon HD 6620G (integrated graphics card)
   
2. Determine the model of your graphic card via:
       lspci | grep -i VGA
   
3. Via the model, check the chip family of the card:
       https://en.wikipedia.org/wiki/List_of_AMD_graphics_processing_units
   
4. Via the chip family, check it is either supported by
       xf86-video-ati (relateively old set):
       https://wiki.gentoo.org/wiki/Radeon#Feature_support
       xf86-video-amdgpu (relatively new set):
       https://wiki.gentoo.org/wiki/AMDGPU#Feature_support
   

Steps:

1. Install SLED12SP3(with SCC registration) on laptop with ATI graphics card
   
2. Log in to the default desktop session(SLE-classic)
   
3. Check if the graphic card driver is installed and running
       run as root user: lspci -nnk | grep -i vga -A3
       or: hwinfo --gfxcard
   4.1 Install Mesa-demo-x via:
       zypper in Mesa-demo-x
   4.2 Check whether accelerated OpenGL applications(eg:glxgears) work with the video driver
       Run the command: glxgears
   4.3 Try covering the glxgears window with other windows, move the window around and activate the overview mode then deactivate it
   

Note:

The proprietary AMD/ATI drivers (fglrx) are considered obsolete and are
no longer built. SLE uses the free radeon or AMDGPU drivers instead.

• radeon(xf86-video-ati) is a family of open source graphics drivers for older AMD/ATI Radeon graphics cards.
  
• AMDGPU(xf86-video-amdgpu) is a family of open source graphics drivers for newer AMD/ATI Radeon graphics cards.
  ","1. The system should boot successfully to the graphical login screen, at the optimal resolution for your monitor, with no errors
  
• Log in successfully and Gnome Shell should be started with no errors
  
• The output should contain:
      Kernel driver in use: radeon
  4.2 glxgears should run properly and with full acceleration and behave as any other window
      A new window with colored spinning gears should appear, and the terminal window will start displaying frame rates every five seconds.
  4.3 Covering them should work properly, they should move smoothly, and should render properly in the overview mode