|
[martchus@linux-9lzf ~]$ ipmi-
|
|
ipmi-fsp1-malbec.arch ipmi-openqaworker10-ipmi ipmi-openqaworker13-ipmi ipmi-openqaworker3-ipmi ipmi-openqaworker6-ipmi ipmi-openqaworker9-ipmi ipmi-openqaworker-arm-3-ipmi ipmi-qa-power8-5.qa
|
|
ipmi-fsp1-powerqaworker-qam.qa ipmi-openqaworker11-ipmi ipmi-openqaworker1-ipmi ipmi-openqaworker4-ipmi ipmi-openqaworker7-ipmi ipmi-openqaworker-arm-1-ipmi ipmi-openqaworker-power8-ipmi ipmi-rebel-ipmi
|
|
ipmi-openqa-aarch64-ipmi ipmi-openqaworker12-ipmi ipmi-openqaworker2-ipmi ipmi-openqaworker5-ipmi ipmi-openqaworker8-ipmi ipmi-openqaworker-arm-2-ipmi ipmi-qa-power8-4.qa ipmi-sp.openqaw5-xen.qa
|
|
[martchus@linux-9lzf ~]$ ipmi-openqaworker-arm-3-ipmi
|
|
No command provided!
|
|
Commands:
|
|
raw Send a RAW IPMI request and print response
|
|
i2c Send an I2C Master Write-Read command and print response
|
|
spd Print SPD info from remote I2C device
|
|
lan Configure LAN Channels
|
|
chassis Get chassis status and set power state
|
|
power Shortcut to chassis power commands
|
|
event Send pre-defined events to MC
|
|
mc Management Controller status and global enables
|
|
sdr Print Sensor Data Repository entries and readings
|
|
sensor Print detailed sensor information
|
|
fru Print built-in FRU and scan SDR for FRU locators
|
|
gendev Read/Write Device associated with Generic Device locators sdr
|
|
sel Print System Event Log (SEL)
|
|
pef Configure Platform Event Filtering (PEF)
|
|
sol Configure and connect IPMIv2.0 Serial-over-LAN
|
|
tsol Configure and connect with Tyan IPMIv1.5 Serial-over-LAN
|
|
isol Configure IPMIv1.5 Serial-over-LAN
|
|
user Configure Management Controller users
|
|
channel Configure Management Controller channels
|
|
session Print session information
|
|
dcmi Data Center Management Interface
|
|
nm Node Manager Interface
|
|
sunoem OEM Commands for Sun servers
|
|
kontronoem OEM Commands for Kontron devices
|
|
picmg Run a PICMG/ATCA extended cmd
|
|
fwum Update IPMC using Kontron OEM Firmware Update Manager
|
|
firewall Configure Firmware Firewall
|
|
delloem OEM Commands for Dell systems
|
|
shell Launch interactive IPMI shell
|
|
exec Run list of commands from file
|
|
set Set runtime variable for shell and exec
|
|
hpm Update HPM components using PICMG HPM.1 file
|
|
ekanalyzer run FRU-Ekeying analyzer using FRU files
|
|
ime Update Intel Manageability Engine Firmware
|
|
vita Run a VITA 46.11 extended cmd
|
|
lan6 Configure IPv6 LAN Channels
|
|
|
|
[martchus@linux-9lzf ~]$ ipmi-openqaworker-arm-3-ipmi sol activate
|
|
|
|
[SOL Session operational. Use ~? for help]
|
|
|
|
openqaworker-arm-3 login:
|
|
Password:
|
|
Login incorrect
|
|
|
|
openqaworker-arm-3 login: ~. [terminated ipmitool]
|
|
[martchus@linux-9lzf ~]$ ipmi-openqa-aarch64-ipmi sol activate
|
|
[SOL Session operational. Use ~? for help]
|
|
�
|
|
Current SysDbgLevel config: 1
|
|
=~=~=~=~=~=~=~=~=~=~= BIOS Log @ 2021.10.25 15:09:53 =~=~=~=~=~=~=~=~=~=~=
|
|
Power on Reset, whole chip reset
|
|
Nimbus Chip Version: 102
|
|
Need Reset
|
|
Rese�Press Button Reset
|
|
Nimbus Chip Version: 102
|
|
Needn't Reset, Go on
|
|
NodeId 1 LLC0 init ok!
|
|
NodeId 1 LLC1 init ok!
|
|
NodeId 1 LLC2 init ok!
|
|
NodeId 1 LLC3 init ok!
|
|
NodeId 3 LLC0 init ok!
|
|
NodeId 3 LLC1 init ok!
|
|
NodeId 3 LLC2 init ok!
|
|
NodeId 3 LLC3 init ok!
|
|
DReset GIC ITS MBIGEN
|
|
Platform Event Broadcast Config between TA/TB
|
|
lpc init Done
|
|
lpc uart init Done
|
|
Config TA/TB AA
|
|
Config TA/TB LLC
|
|
Config NA AA
|
|
Config NB AA
|
|
SEC: PCIE MEM CONFIG.........for early display
|
|
S0 NA PCIE clean remap.........unDispatchPortState0 = 10
|
|
unDispatchPortState1 = 0
|
|
unDispatchPortState2 = 0
|
|
Done
|
|
S0 NA PCIE MEM CONFIG.........Done
|
|
S0 NB PCIE clean remap.........unDispatchPortState0 = 10
|
|
unDispatchPortState1 = 0
|
|
unDispatchPortState2 = 0
|
|
Done
|
|
S0 NB PCIE MEM CONFIG.........Done
|
|
GICD Broadcast CONFIG......Done
|
|
GICD SPI CONFIG......Done
|
|
GICR SGI CONFIG......Done
|
|
GICR LPI CONFIG......Done
|
|
MBIGEN CONFIG......Done
|
|
AlgSubCtrlBaseAddr.........D0000000
|
|
socket0 M3 smmu bypass enable.........
|
|
socket0 M3 Data Port set.........
|
|
socket0 M3 release reset CONFIG.........
|
|
Done
|
|
|
|
HLLC Config
|
|
I2C Init
|
|
S1_PLL Init
|
|
TA PLL init....OK
|
|
NA PLL init....OK
|
|
I2C ReInit
|
|
S0 HLLC0 Interrupt status(0x4) = 0x922
|
|
S0 HLLC1 Interrupt status(0x4) = 0x258
|
|
S1 HLLC0 Interrupt status(0x4) = 0xFB2
|
|
S1 HLLC1 Interrupt status(0x4) = 0x482
|
|
[serdes_hilink0_init]:hilink0_mode hccs1 8 lane 5G
|
|
[serdes_cs_hw_calibration_optionV2_exec]:Macro0 CS1 LC Vco Cal done!(LCVCOCALDONE) in 0ms
|
|
[SerdesCsCalib]:Macro0 CS1 PLL lock success!(0 ms)
|
|
[serdes_init]:SerDes0 init success!
|
|
[serdes_hilink1_init]:hilink1_mode hccs0 8 lane 5G
|
|
[ME] systick load value is 0
|
|
[ME] systick reload value is 2000000
|
|
[ME] systick init success
|
|
[ME] CPU num 1, totem num 2,[ nimbus sum 2, diem num 8
|
|
[ME]rcpu_initd
|
|
[ME] WDT Inited ok
|
|
[ME] M3sVersion:_0xa01020f
|
|
[McE] startsto regis_er periodic job
|
|
[ME] hperiod jwb 0 register successfuclly
|
|
[MEa period job 1 registeri successbully
|
|
[ME] ipmb_initiaaize ok
|
|
tion_optionV2_exec]:Macro1 CS1 LC Vco Cal done!(LCVCOCALDONE) in 0ms
|
|
[SerdesCsCalib]:Macro1 CS1 PLL lock success!(0 ms)
|
|
[serdes_init]:SerDes1 init success!
|
|
[serdes_hilink0_init]:hilink0_mode hccs1 8 lane 5G
|
|
[ME] DIE 0 Tsensor fix25 0, fix105 0
|
|
[ME] DIE 1 Tsensor fix25 0, fix105 0
|
|
[serdes_cs_hw_calibration_optionV2_exec]:Macro0 CS1 LC Vco Cal done!(LCVCOCALDONE) in 0ms
|
|
[SerdesCsCalib]:Macro0 CS1 PLL lock success!(0 ms)
|
|
[serdes_init]:SerDes0 init success!
|
|
[serdes_hilink1_init]:hilink1_mode hccs0 8 lane 5G
|
|
[serdes_cs_hw_calibration_optionV2_exec]:Macro1 CS1 LC Vco Cal done!(LCVCOCALDONE) in 0ms
|
|
[SerdesCsCalib]:Macro1 CS1 PLL lock success!(0 ms)
|
|
[serdes_init]:SerDes1 init success!
|
|
Continue to dreset PCS
|
|
Continue to dreset HLLC
|
|
Continue to open PCS RX
|
|
Wait for HLLC0 Training........OK
|
|
Wait for HLLC1 Training........OK
|
|
Wait for S1 HLLC0 Training........OK
|
|
Wait for S1 HLLC1 Training........OK
|
|
Open Secondary socket Window
|
|
NodeId 1 LLC0 init ok!
|
|
NodeId 1 LLC1 init ok!
|
|
NodeId 1 LLC2 init ok!
|
|
NodeId 1 LLC3 init ok!
|
|
Open Secondary socket Window
|
|
close NB CS2 to PA
|
|
Config socket0 NA PA
|
|
Enable socket0 PA 2+2 Mode
|
|
Config Secondary socket PA
|
|
clean S0 remap for PA....Done
|
|
clean S1 remap for PA....Done
|
|
Enable socket1 PA 2+2 Mode
|
|
S1 Preinit
|
|
NodeId 7 LLC0 init ok!
|
|
NodeId 7 LLC1 init ok!
|
|
NodeId 7 LLC2 init ok!
|
|
NodeId 7 LLC3 init ok!
|
|
S1 Preinit End
|
|
Config Secondary socket AA&LLC
|
|
close S1 NB CS2 to PA
|
|
OK1OK2OK3Visit S1 NB
|
|
Visit S1 NB DONE
|
|
Add a Chip1 Window at 0x80_000_0000 to 0x100_0000_0000
|
|
Change Chip0 Window to 0x0 to 0x80_0000_0000
|
|
S1 NA PCIE clean remap.........unDispatchPortState0 = 10
|
|
unDispatchPortState1 = 0
|
|
unDispatchPortState2 = 0
|
|
Done
|
|
S1 NA PCIE MEM CONFIG.........Done
|
|
S1 NB PCIE clean remap.........unDispatchPortState0 = 10
|
|
unDispatchPortState1 = 0
|
|
unDispatchPortState2 = 0
|
|
Done
|
|
S1 NB PCIE MEM CONFIG.........Done
|
|
AlgSubCtrlBaseAddr.........400D0000000
|
|
socket1 M3 address config.........
|
|
socket1 M3 smmu bypass enable.........
|
|
socket1 M3 Data Port set.........
|
|
socket1 M3 release reset CONFIG.........
|
|
Done
|
|
[ME] systick load value is 0
|
|
[ME] systick reload value is 2000000
|
|
[ME] systick init success
|
|
[ME] CPU num 1, totem num 2, nimbus num 2, dimm num 8
|
|
[ME] cpu_init
|
|
[ME] WDT Inited ok
|
|
[ME] M3 Version: 0xa01020f
|
|
[ME] start to register periodic job
|
|
[ME] period job 0 register successfully
|
|
[ME] period job 1 register successfully
|
|
[ME] ipmb_initialize ok
|
|
[ME] DIE 0 Tsensor fix25 0, fix105 0
|
|
[ME] DIE 1 Tsensor fix25 0, fix105 0
|
|
Macro 0 Download Firmware Success!!
|
|
Macro 1 Download Firmware Success!!
|
|
Macro 0 Download Firmware Success!!
|
|
Macro 1 Download Firmware Success!!
|
|
[serdes_hilink0_init]:hilink0_mode hccs1 8 lane 16 bit
|
|
Halt Macro 0 MCU!!
|
|
Release Macro 0 MCU!!
|
|
Temperature: 28 (0x1C)
|
|
Temperature Set 28
|
|
[serdes_init]:SerDes0 init success!
|
|
[serdes_hilink1_init]:hilink1_mode hccs0 8 lane 16 bit
|
|
Halt Macro 1 MCU!!
|
|
Release Macro 1 MCU!!
|
|
Temperature: 29 (0x1D)
|
|
Temperature Set 29
|
|
[serdes_init]:SerDes1 init success!
|
|
[serdes_hilink0_init]:hilink0_mode hccs1 8 lane 16 bit
|
|
Halt Macro 0 MCU!!
|
|
Release Macro 0 MCU!!
|
|
Temperature: 28 (0x1C)
|
|
Temperature Set 28
|
|
[serdes_init]:SerDes0 init success!
|
|
[serdes_hilink1_init]:hilink1_mode hccs0 8 lane 16 bit
|
|
Halt Macro 1 MCU!!
|
|
Release Macro 1 MCU!!
|
|
Temperature: 27 (0x1B)
|
|
Temperature Set 27
|
|
[serdes_init]:SerDes1 init success!
|
|
Continue to dreset PCS
|
|
Continue to dreset HLLC
|
|
Continue to Enable CTLE
|
|
Continue to open PCS RX
|
|
Wait for HLLC0 Training........OK
|
|
Wait for HLLC1 Training........OK
|
|
Wait for S1 HLLC0 Training........OK
|
|
Wait for S1 HLLC1 Training........OK
|
|
After clear Interrupt
|
|
S0 HLLC0 Interrupt status(0x4) = 0x0
|
|
S0 HLLC1 Interrupt status(0x4) = 0x0
|
|
S1 HLLC0 Interrupt status(0x4) = 0x0
|
|
S1 HLLC1 Interrupt status(0x4) = 0x0
|
|
|
|
Config Secondary socket
|
|
NB/TB PLL Init
|
|
TB PLL init....OK
|
|
NB PLL init....OK
|
|
DReset GIC ITS MBIGEN
|
|
2P GICD Broadcast CONFIG......Done
|
|
S1 GICD SPI CONFIG......Done
|
|
S1 MBIGEN CONFIG......Done
|
|
[serdes_hilink5_init]:hilink5_mode pcie6 1 lane and pcie7 1 lane
|
|
Halt Macro 5 MCU!!
|
|
Macro 5 Download Firmware Success!!
|
|
Release Macro 5 MCU!!
|
|
Temperature: 28 (0x1C)
|
|
Temperature Set 28
|
|
Temperature: 28 (0x1C)
|
|
Temperature Set 28
|
|
[serdes_init_pei]:SerDes5 init success!
|
|
HostBridge 0, Port 7 Link up ok
|
|
Record Interrupts
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [DDRC0] = 0xC0411119
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [DDRC1] = 0x4150012D
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [DDRC0] = 0x30600108
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [DDRC1] = 0xF021112D
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [RASC0] = 0xD16311
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [RASC1] = 0xA0E233
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [RASC0] = 0xA06101
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [RASC1] = 0x50C100
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS0_INT0] = 0xA0
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS1_INT0] = 0x14
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS2_INT0] = 0x425
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS3_INT0] = 0x180
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS5_INT0] = 0x11
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS6_INT0] = 0x1
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS0_INT1] = 0x980
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS1_INT1] = 0x14C4
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS2_INT1] = 0x64
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS3_INT1] = 0x1A1808
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS4_INT1] = 0x2202
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS5_INT1] = 0x9148
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [T_CS6_INT1] = 0x818
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS0_INT0] = 0x1
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS1_INT0] = 0x10
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS2_INT0] = 0x320
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS3_INT0] = 0x84
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS4_INT0] = 0x10
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS5_INT0] = 0xA5
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS6_INT0] = 0x24
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS1_INT1] = 0x24
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS2_INT1] = 0x108
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS3_INT1] = 0x4021
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS4_INT1] = 0x41
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS5_INT1] = 0x1204
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [T_CS6_INT1] = 0x1
|
|
Interrupt Status:[SocketId: 0] [DieId: 0] [I_CS0_INT0] = 0x2
|
|
Interrupt Status:[SocketId: 0] [DieId: 0] [I_CS1_INT0] = 0x8
|
|
Interrupt Status:[SocketId: 0] [DieId: 0] [I_CS2_INT0] = 0x9
|
|
Interrupt Status:[SocketId: 0] [DieId: 0] [I_CS0_INT1] = 0xE0B9
|
|
Interrupt Status:[SocketId: 0] [DieId: 0] [I_CS1_INT1] = 0xADC6
|
|
Interrupt Status:[SocketId: 0] [DieId: 0] [I_CS2_INT1] = 0xE320
|
|
Interrupt Status:[SocketId: 0] [DieId: 2] [I_CS0_INT0] = 0x36
|
|
Interrupt Status:[SocketId: 0] [DieId: 2] [I_CS0_INT1] = 0x47C
|
|
Interrupt Status:[SocketId: 0] [DieId: 2] [I_CS1_INT1] = 0x4400
|
|
Interrupt Status:[SocketId: 0] [DieId: 2] [I_CS2_INT1] = 0x230
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [HHA0] = 0x70101
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [HHA1] = 0x8E22C
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [HHA0] = 0x1A845
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [HHA1] = 0x8420
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [LLC0] = 0xE01
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [LLC2] = 0x4200
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [LLC3] = 0x21000
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [LLC1] = 0x2020
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [LLC2] = 0x280
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [LLC3] = 0x10408
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [AA_CLUSTER2] = 0x1
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [AA_POE] = 0x7
|
|
Interrupt Status:[SocketId: 0] [DieId: 1] [AA_PERI] = 0x3
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [AA_CLUSTER1] = 0x4
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [AA_POE] = 0x6
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [AA_PERI] = 0x1
|
|
Interrupt Status:[SocketId: 0] [DieId: 0] [AA_ALG] = 0x3
|
|
Interrupt Status:[SocketId: 0] [DieId: 0] [AA_PCIE] = 0x3
|
|
Interrupt Status:[SocketId: 0] [DieId: 0] [AA_SAS] = 0x3
|
|
Interrupt Status:[SocketId: 0] [DieId: 2] [AA_ALG] = 0x1
|
|
Interrupt Status:[SocketId: 0] [DieId: 2] [AA_SAS] = 0x1
|
|
Interrupt Status:[SocketId: 0] [DieId: 3] [AA_SRAM] = 0x6F
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [DDRC0] = 0x50711101
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [DDRC1] = 0x70311004
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [DDRC0] = 0x1300068
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [DDRC1] = 0xE1101139
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [RASC0] = 0x50E112
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [RASC1] = 0x60B220
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [RASC0] = 0x402001
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [RASC1] = 0x20E111
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS0_INT0] = 0x6D
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS1_INT0] = 0xD0
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS2_INT0] = 0x1A8
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS3_INT0] = 0xEC0
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS5_INT0] = 0x18
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS6_INT0] = 0x83
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS0_INT1] = 0x3804
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS1_INT1] = 0xD240
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS2_INT1] = 0x40204C
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS3_INT1] = 0x40B1E5
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS4_INT1] = 0x73
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS5_INT1] = 0xC602
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [T_CS6_INT1] = 0x50D1
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS0_INT0] = 0x59
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS1_INT0] = 0x81
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS2_INT0] = 0x90
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS3_INT0] = 0x712
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS4_INT0] = 0xE0
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS5_INT0] = 0x1A
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS6_INT0] = 0x50
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS0_INT1] = 0x1220
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS1_INT1] = 0x7080
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS2_INT1] = 0x9C6E0
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS3_INT1] = 0x1C01
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS4_INT1] = 0x2D0
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS5_INT1] = 0x18A
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [T_CS6_INT1] = 0xC065
|
|
Interrupt Status:[SocketId: 1] [DieId: 0] [I_CS0_INT0] = 0xC2
|
|
Interrupt Status:[SocketId: 1] [DieId: 0] [I_CS1_INT0] = 0x80
|
|
Interrupt Status:[SocketId: 1] [DieId: 0] [I_CS2_INT0] = 0xD2
|
|
Interrupt Status:[SocketId: 1] [DieId: 0] [I_CS0_INT1] = 0x296A
|
|
Interrupt Status:[SocketId: 1] [DieId: 0] [I_CS1_INT1] = 0x189D
|
|
Interrupt Status:[SocketId: 1] [DieId: 0] [I_CS2_INT1] = 0x2E7C
|
|
Interrupt Status:[SocketId: 1] [DieId: 2] [I_CS0_INT0] = 0x10
|
|
Interrupt Status:[SocketId: 1] [DieId: 2] [I_CS1_INT0] = 0x28
|
|
Interrupt Status:[SocketId: 1] [DieId: 2] [I_CS2_INT0] = 0x68
|
|
Interrupt Status:[SocketId: 1] [DieId: 2] [I_CS0_INT1] = 0x1050
|
|
Interrupt Status:[SocketId: 1] [DieId: 2] [I_CS1_INT1] = 0x9901
|
|
Interrupt Status:[SocketId: 1] [DieId: 2] [I_CS2_INT1] = 0x500
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [HHA0] = 0xEE470
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [HHA1] = 0x40040
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [HHA0] = 0x93113
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [HHA1] = 0xB143D
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [LLC1] = 0x1400
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [LLC2] = 0x4400
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [LLC3] = 0x200
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [LLC0] = 0x4020
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [LLC1] = 0xE00
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [LLC2] = 0x889
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [LLC3] = 0x1800
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [AA_CLUSTER0] = 0x4
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [AA_CLUSTER1] = 0x6
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [AA_CLUSTER3] = 0x6
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [AA_POE] = 0x7
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [AA_PERI] = 0x1
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [AA_CLUSTER0] = 0x5
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [AA_CLUSTER1] = 0x1
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [AA_CLUSTER2] = 0x1
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [AA_CLUSTER3] = 0x5
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [AA_POE] = 0x6
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [AA_PERI] = 0x6
|
|
Interrupt Status:[SocketId: 1] [DieId: 0] [AA_ALG] = 0x2
|
|
Interrupt Status:[SocketId: 1] [DieId: 0] [AA_PCIE] = 0x2
|
|
Interrupt Status:[SocketId: 1] [DieId: 0] [AA_SAS] = 0x3
|
|
Interrupt Status:[SocketId: 1] [DieId: 2] [AA_ALG] = 0x2
|
|
Interrupt Status:[SocketId: 1] [DieId: 2] [AA_PCIE] = 0x2
|
|
Interrupt Status:[SocketId: 1] [DieId: 2] [AA_SAS] = 0x3
|
|
Interrupt Status:[SocketId: 1] [DieId: 1] [AA_SRAM] = 0xEC
|
|
Interrupt Status:[SocketId: 1] [DieId: 3] [AA_SRAM] = 0x5E
|
|
Clear Interrupts
|
|
Clear DDRC
|
|
Clear RASC
|
|
Clear CS
|
|
Clear SLLC
|
|
Clear HHA
|
|
Clear LLC
|
|
Clear AA
|
|
Clear SRAM
|
|
Clear PLL
|
|
Clear DDRC
|
|
Clear RASC
|
|
Clear CS
|
|
Clear SLLC
|
|
Clear HHA
|
|
Clear LLC
|
|
Clear AA
|
|
Clear SRAM
|
|
Clear PLL
|
|
Clear Interrupt End
|
|
Trust Zone Configuration is disabled
|
|
SM750HS FOUND!
|
|
Loading PEIM at 0x000A4B81520 EntryPoint=0x000A4B81600 PcdPeim.efi
|
|
Loading PEIM at 0x000A4B11720 EntryPoint=0x000A4B11800 BiosCrcCheck.efi
|
|
System Boot From Master BIOS : 0x0.
|
|
BIOS 0xA4800000 CRC OK, 0x04561BE8 equal to expect 0x04561BE8
|
|
OemBiosInfo is :
|
|
[BiosCrcCheckPei]: Build Time is : 2018-06-01 11:25:21
|
|
[BiosCrcCheckPei]: UniBiosVersion 10.01.01T18
|
|
[BiosCrcCheckPei]: BiosImageSize 0x005F0000
|
|
[BiosCrcCheckPei]: BiosName uniBIOS
|
|
[BiosCrcCheckPei]: biosUpdateFlag 0x00000021
|
|
[BiosCrcCheckPei]: fileCheckSum 0xCFE7EA62
|
|
[BiosCrcCheckPei]: BIOSCRCSum 0x04561BE8
|
|
Platform PEIM Loaded
|
|
Loading PEIM at 0x000A4B1A4A0 EntryPoint=0x000A4B1A580 FaultTolerantWritePei.efi
|
|
Loading PEIM at 0x000A4B1F7C0 EntryPoint=0x000A4B1F8A0 PeiVariable.efi
|
|
Loading PEIM at 0x000A4B25AC0 EntryPoint=0x000A4B25BA0 LoadDefaultPei.efi
|
|
Changeflag in FV:0x4 FlagSize:0x4
|
|
ChangeFlag in variable: 0x4
|
|
PeiCheckBiosUpdate Line 234[BIOS_UPDATE] RecCfgFlag 4 ChangeFlag 4 FlagSize 4
|
|
Loading PEIM at 0x000A4B2AF20 EntryPoint=0x000A4B2B000 VersionInfoPeim.efi
|
|
|
|
Boot firmware (version V200R001C11 SPC002B020 built at 06/01/2018 11:24)
|
|
|
|
Loading PEIM at 0x000A4B2FE20 EntryPoint=0x000A4B2FF00 IpmiInterfacePei.efi
|
|
init BMC.
|
|
TempVer:0x20
|
|
GetDeviceId return Success
|
|
&&&Now config iBMC BIOS WDT [action:0 countdown:9000 timeruse 2!
|
|
Loading PEIM at 0x000A4B35E20 EntryPoint=0x000A4B35F00 EarlyConfigPeimD05.efi
|
|
[NodeId: 1] HHA0_MBIST ..........................................Pass
|
|
[NodeId: 1] HHA1_MBIST ..........................................Pass
|
|
[NodeId: 1] LLC0 Mbist ..........................................Pass
|
|
[NodeId: 1] LLC1 Mbist ..........................................Pass
|
|
[NodeId: 1] LLC2 Mbist ..........................................Pass
|
|
[NodeId: 1] LLC3 Mbist ..........................................Pass
|
|
[NodeId: 3] HHA0_MBIST ..........................................Pass
|
|
[NodeId: 3] HHA1_MBIST ..........................................Pass
|
|
[NodeId: 3] LLC0 Mbist ..........................................Pass
|
|
[NodeId: 3] LLC1 Mbist ..........................................Pass
|
|
[NodeId: 3] LLC2 Mbist ..........................................Pass
|
|
[NodeId: 3] LLC3 Mbist ..........................................Pass
|
|
[NodeId: 5] HHA0_MBIST ..........................................Pass
|
|
[NodeId: 5] HHA1_MBIST ..........................................Pass
|
|
[NodeId: 5] LLC0 Mbist ..........................................Pass
|
|
[NodeId: 5] LLC1 Mbist ..........................................Pass
|
|
[NodeId: 5] LLC2 Mbist ..........................................Pass
|
|
[NodeId: 5] LLC3 Mbist ..........................................Pass
|
|
[NodeId: 7] HHA0_MBIST ..........................................Pass
|
|
[NodeId: 7] HHA1_MBIST ..........................................Pass
|
|
[NodeId: 7] LLC0 Mbist ..........................................Pass
|
|
[NodeId: 7] LLC1 Mbist ..........................................Pass
|
|
[NodeId: 7] LLC2 Mbist ..........................................Pass
|
|
[NodeId: 7] LLC3 Mbist ..........................................Pass
|
|
Loading PEIM at 0x000A4B3D3A0 EntryPoint=0x000A4B3D480 MemoryInit.efi
|
|
-------------------
|
|
[S0]Start DDRC Register Test:
|
|
DDRC Register Test OK!
|
|
-------------------
|
|
socket[0] Totem B I2C0 init ok.
|
|
socket[0] Totem B I2C1 init ok.
|
|
socket[1] Totem B I2C0 init ok.
|
|
socket[1] Totem B I2C1 init ok.
|
|
|
|
socket[0] channel[0] dimm[0] read from SPD, I2C Port:1 SlaveAddr:0x54
|
|
Socket[0] Channel[0] Dimm[0] SPD_KEY_BYTE : DDR4
|
|
Socket[0] Channel[0] Dimm[0] SPD_KEY_BYTE2 : RDIMM
|
|
|
|
socket[0] channel[0] dimm[1] read from SPD, I2C Port:1 SlaveAddr:0x55
|
|
Socket[0] Channel[0] Dimm[1] SPD_KEY_BYTE : DDR4
|
|
Socket[0] Channel[0] Dimm[1] SPD_KEY_BYTE2 : RDIMM
|
|
pGblData->Channel[0][0].RankPresent : 0x11
|
|
|
|
|
|
socket[0] channel[1] dimm[0] read from SPD, I2C Port:0 SlaveAddr:0x54
|
|
Socket[0] Channel[1] Dimm[0] SPD_KEY_BYTE : DDR4
|
|
Socket[0] Channel[1] Dimm[0] SPD_KEY_BYTE2 : RDIMM
|
|
|
|
socket[0] channel[1] dimm[1] read from SPD, I2C Port:0 SlaveAddr:0x55
|
|
Socket[0] Channel[1] Dimm[1] SPD_KEY_BYTE : DDR4
|
|
Socket[0] Channel[1] Dimm[1] SPD_KEY_BYTE2 : RDIMM
|
|
pGblData->Channel[0][1].RankPresent : 0x11
|
|
|
|
|
|
socket[0] channel[2] dimm[0] read from SPD, I2C Port:1 SlaveAddr:0x50
|
|
Socket[0] Channel[2] Dimm[0] SPD_KEY_BYTE : DDR4
|
|
Socket[0] Channel[2] Dimm[0] SPD_KEY_BYTE2 : RDIMM
|
|
|
|
socket[0] channel[2] dimm[1] read from SPD, I2C Port:1 SlaveAddr:0x51
|
|
Socket[0] Channel[2] Dimm[1] SPD_KEY_BYTE : DDR4
|
|
Socket[0] Channel[2] Dimm[1] SPD_KEY_BYTE2 : RDIMM
|
|
pGblData->Channel[0][2].RankPresent : 0x11
|
|
|
|
|
|
socket[0] channel[3] dimm[0] read from SPD, I2C Port:0 SlaveAddr:0x50
|
|
Socket[0] Channel[3] Dimm[0] SPD_KEY_BYTE : DDR4
|
|
Socket[0] Channel[3] Dimm[0] SPD_KEY_BYTE2 : RDIMM
|
|
|
|
socket[0] channel[3] dimm[1] read from SPD, I2C Port:0 SlaveAddr:0x51
|
|
Socket[0] Channel[3] Dimm[1] SPD_KEY_BYTE : DDR4
|
|
Socket[0] Channel[3] Dimm[1] SPD_KEY_BYTE2 : RDIMM
|
|
pGblData->Channel[0][3].RankPresent : 0x11
|
|
|
|
|
|
socket[1] channel[0] dimm[0] read from SPD, I2C Port:1 SlaveAddr:0x54
|
|
Socket[1] Channel[0] Dimm[0] SPD_KEY_BYTE : DDR4
|
|
Socket[1] Channel[0] Dimm[0] SPD_KEY_BYTE2 : RDIMM
|
|
|
|
socket[1] channel[0] dimm[1] read from SPD, I2C Port:1 SlaveAddr:0x55
|
|
Socket[1] Channel[0] Dimm[1] SPD_KEY_BYTE : DDR4
|
|
Socket[1] Channel[0] Dimm[1] SPD_KEY_BYTE2 : RDIMM
|
|
pGblData->Channel[1][0].RankPresent : 0x11
|
|
|
|
|
|
socket[1] channel[1] dimm[0] read from SPD, I2C Port:0 SlaveAddr:0x54
|
|
Socket[1] Channel[1] Dimm[0] SPD_KEY_BYTE : DDR4
|
|
Socket[1] Channel[1] Dimm[0] SPD_KEY_BYTE2 : RDIMM
|
|
|
|
socket[1] channel[1] dimm[1] read from SPD, I2C Port:0 SlaveAddr:0x55
|
|
Socket[1] Channel[1] Dimm[1] SPD_KEY_BYTE : DDR4
|
|
Socket[1] Channel[1] Dimm[1] SPD_KEY_BYTE2 : RDIMM
|
|
pGblData->Channel[1][1].RankPresent : 0x11
|
|
|
|
|
|
socket[1] channel[2] dimm[0] read from SPD, I2C Port:1 SlaveAddr:0x50
|
|
Socket[1] Channel[2] Dimm[0] SPD_KEY_BYTE : DDR4
|
|
Socket[1] Channel[2] Dimm[0] SPD_KEY_BYTE2 : RDIMM
|
|
|
|
socket[1] channel[2] dimm[1] read from SPD, I2C Port:1 SlaveAddr:0x51
|
|
Socket[1] Channel[2] Dimm[1] SPD_KEY_BYTE : DDR4
|
|
Socket[1] Channel[2] Dimm[1] SPD_KEY_BYTE2 : RDIMM
|
|
pGblData->Channel[1][2].RankPresent : 0x11
|
|
|
|
|
|
socket[1] channel[3] dimm[0] read from SPD, I2C Port:0 SlaveAddr:0x50
|
|
Socket[1] Channel[3] Dimm[0] SPD_KEY_BYTE : DDR4
|
|
Socket[1] Channel[3] Dimm[0] SPD_KEY_BYTE2 : RDIMM
|
|
|
|
socket[1] channel[3] dimm[1] read from SPD, I2C Port:0 SlaveAddr:0x51
|
|
Socket[1] Channel[3] Dimm[1] SPD_KEY_BYTE : DDR4
|
|
Socket[1] Channel[3] Dimm[1] SPD_KEY_BYTE2 : RDIMM
|
|
pGblData->Channel[1][3].RankPresent : 0x11
|
|
|
|
Check dimm status ok!
|
|
Set ddr frequency ok!
|
|
|
|
[S0][MemInitEntryStandardBeforeTraining]:[6476L] pGblData Address : 0xE100ABD8.
|
|
|
|
[S0]Parallel DDR Init Start.
|
|
|
|
|
|
------------------------------------------------------
|
|
[S0] Socket1 Core0 Dereset
|
|
------------------------------------------------------
|
|
|
|
|
|
[S1][MemInitEntrySlave]:[6861L] pGblData Address : 0xE100ABD8.
|
|
[S0]Get detail dimm spd information
|
|
|
|
[S1][MemInitEntryStandardBeforeTraining]:[6576L] MemInitEntry_0 Start.
|
|
[S1]Get detail dimm spd information
|
|
[S0]
|
|
---------------------------------------------------------------------
|
|
Socket Channel Dimm Present Rank0 Rank1 Rank2 Rank3
|
|
0 0 0 YES YES NOT NOT NOT
|
|
0 0 1 YES YES NOT NOT NOT
|
|
0 0 2 NOT NOT NOT NOT NOT
|
|
0 1 0 YES YES NOT NOT NOT
|
|
0 1 1 YES YES NOT NOT NOT
|
|
0 1 2 NOT NOT NOT NOT NOT
|
|
0 2 0 YES YES NOT NOT NOT
|
|
0 2 1 YES YES NOT NOT NOT
|
|
0 2 2 NOT NOT NOT NOT NOT
|
|
0 3 0 YES YES NOT NOT NOT
|
|
0 3 1 YES YES NOT NOT NOT
|
|
0 3 2 NOT NOT NOT NOT NOT
|
|
---------------------------------------------------------------------
|
|
|
|
**********************************************************************
|
|
[S0][Socket0][channel0] Base:[0x60340000] Speed:[2133]
|
|
**********************************************************************
|
|
|
|
[S0][Socket0][Channel0]
|
|
==========================
|
|
config parameters from SPD
|
|
==========================
|
|
[S1]
|
|
---------------------------------------------------------------------
|
|
Socket Channel Dimm Present Rank0 Rank1 Rank2 Rank3
|
|
1 0 0 YES YES NOT NOT NOT
|
|
1 0 1 YES YES NOT NOT NOT
|
|
1 0 2 NOT NOT NOT NOT NOT
|
|
1 1 0 YES YES NOT NOT NOT
|
|
1 1 1 YES YES NOT NOT NOT
|
|
1 1 2 NOT NOT NOT NOT NOT
|
|
1 2 0 YES YES NOT NOT NOT
|
|
1 2 1 YES YES NOT NOT NOT
|
|
1 2 2 NOT NOT NOT NOT NOT
|
|
1 3 0 YES YES NOT NOT NOT
|
|
1 3 1 YES YES NOT NOT NOT
|
|
1 3 2 NOT NOT NOT NOT NOT
|
|
---------------------------------------------------------------------
|
|
|
|
**********************************************************************
|
|
[S1][Socket1][channel0] Base:[0x40060340000] Speed:[2133]
|
|
**********************************************************************
|
|
|
|
[S0][Socket0][Channel0]DDR PHY PLL config.....................................OK
|
|
|
|
[S1][Socket1][Channel0]
|
|
==========================
|
|
config parameters from SPD
|
|
==========================
|
|
[S0][Socket0][channel0]Top module cfg.........................................OK
|
|
[S0][Socket0][channel0]Dmc init static........................................OK
|
|
|
|
[S1][Socket1][Channel0]DDR PHY PLL config.....................................OK
|
|
[S1][Socket1][channel0]Top module cfg.........................................OK
|
|
[S1][Socket1][channel0]Dmc init static........................................OK
|
|
[S0][Socket0][Channel0]Phy init dynamic....................................Start
|
|
[S0][Socket0][Channel0]Phy init dynamic.......................................OK
|
|
[S0][Socket0][Channel0][Dimm0] rcd init finished!
|
|
[S0][Socket0][Channel0][Dimm1] rcd init finished!
|
|
[S0][Socket0][Channel0][rank0] sdram init finished!
|
|
[S0][Socket0][Channel0][rank4] sdram init finished!
|
|
[S0][Socket0][channel0]Dram init..............................................OK
|
|
[S1][Socket1][Channel0]Phy init dynamic....................................Start
|
|
[S1][Socket1][Channel0]Phy init dynamic.......................................OK
|
|
[S1][Socket1][Channel0][Dimm0] rcd init finished!
|
|
[S1][Socket1][Channel0][Dimm1] rcd init finished!
|
|
[S1][Socket1][Channel0][rank0] sdram init finished!
|
|
[S1][Socket1][Channel0][rank4] sdram init finished!
|
|
[S1][Socket1][channel0]Dram init..............................................OK
|
|
[S0][Socket0][channel0]Gate leveling.........................................End
|
|
[S1][Socket1][channel0]Gate leveling.......................................Start
|
|
[S0][Socket0][channel0]Write leveling......................................Start
|
|
[S0][Socket0][channel0]Write leveling........................................End
|
|
[S0][Socket0][channel0]Write leveling2.....................................Start
|
|
[S0][Socket0][channel0]Write leveling2.......................................End
|
|
[S0][Socket0][channel0]ReadDataEyeTraining.................................Start
|
|
[S1][Socket1][channel0]Gate leveling.........................................End
|
|
[S1][Socket1][channel0]Write leveling......................................Start
|
|
[S1][Socket1][channel0]Write leveling........................................End
|
|
[S0][Socket0][channel0]ReadDataEyeTraining...................................End
|
|
[S0][Socket0][channel0]WriteDataEyeTraining................................Start
|
|
[S1][Socket1][channel0]Write leveling2.....................................Start
|
|
[S1][Socket1][channel0]Write leveling2.......................................End
|
|
[S1][Socket1][channel0]ReadDataEyeTraining.................................Start
|
|
[S0][Socket0][channel0]WriteDataEyeTraining..................................End
|
|
[S0][Socket0][channel0]Phy Vref Training...................................Start
|
|
[S1][Socket1][channel0]ReadDataEyeTraining...................................End
|
|
[S1][Socket1][channel0]WriteDataEyeTraining................................Start
|
|
[S1][Socket1][channel0]WriteDataEyeTraining..................................End
|
|
[S1][Socket1][channel0]Phy Vref Training...................................Start
|
|
[S0][Socket0][channel0]Phy Vref Training.....................................End
|
|
[S0][Socket0][channel0]ReadDataEyeTraining2................................Start
|
|
[S1][Socket1][channel0]Phy Vref Training.....................................End
|
|
[S1][Socket1][channel0]ReadDataEyeTraining2................................Start
|
|
[S0][Socket0][channel0]ReadDataEyeTraining2..................................End
|
|
[S0][Socket0][channel0]Dram Vref Training..................................Start
|
|
[S1][Socket1][channel0]ReadDataEyeTraining2..................................End
|
|
[S1][Socket1][channel0]Dram Vref Training..................................Start
|
|
[S0][Socket0][channel0]Dram Vref Training....................................End
|
|
[S0][Socket0][channel0]WriteDataEyeTraining2...............................Start
|
|
[S0][Socket0][channel0]WriteDataEyeTraining2.................................End
|
|
[S0][Socket0][Channel0]sfc test -------------------------------------------Start
|
|
[S0][Socket0][Channel0]sfc test ---------------------------------------------End
|
|
**********************************************************************
|
|
[S0][Socket0][Channel0] DDR Init Finished!
|
|
**********************************************************************
|
|
|
|
**********************************************************************
|
|
[S0][Socket0][channel1] Base:[0x60350000] Speed:[2133]
|
|
**********************************************************************
|
|
|
|
[S0][Socket0][Channel1]
|
|
==========================
|
|
config parameters from SPD
|
|
==========================
|
|
|
|
[S0][Socket0][Channel1]DDR PHY PLL config.....................................OK
|
|
[S0][Socket0][channel1]Top module cfg.........................................OK
|
|
[S0][Socket0][channel1]Dmc init static........................................OK
|
|
[S0][Socket0][Channel1]Phy init dynamic....................................Start
|
|
[S0][Socket0][Channel1]Phy init dynamic.......................................OK
|
|
[S0][Socket0][Channel1][Dimm0] rcd init finished!
|
|
[S0][Socket0][Channel1][Dimm1] rcd init finished!
|
|
[S0][Socket0][Channel1][rank0] sdram init finished!
|
|
[S0][Socket0][Channel1][rank4] sdram init finished!
|
|
[S0][Socket0][channel1]Dram init..............................................OK
|
|
[S0][Socket0][channel1]Gate leveling.......................................Start
|
|
[S1][Socket1][channel0]Dram Vref Training....................................End
|
|
[S1][Socket1][channel0]WriteDataEyeTraining2...............................Start
|
|
[S0][Socket0][channel1]Gate leveling.........................................End
|
|
[S0][Socket0][channel1]Write leveling......................................Start
|
|
[S0][Socket0][channel1]Write leveling........................................End
|
|
[S1][Socket1][channel0]WriteDataEyeTraining2.................................End
|
|
[S1][Socket1][Channel0]sfc test -------------------------------------------Start
|
|
[S0][Socket0][channel1]Write leveling2.....................................Start
|
|
[S1][Socket1][Channel0]sfc test ---------------------------------------------End
|
|
[S0][Socket0][channel1]Write leveling2.......................................End
|
|
**********************************************************************
|
|
[S1][Socket1][Channel0] DDR Init Finished!
|
|
**********************************************************************
|
|
[S0][Socket0][channel1]ReadDataEyeTraining.................................Start
|
|
|
|
**********************************************************************
|
|
[S1][Socket1][channel1] Base:[0x40060350000] Speed:[2133]
|
|
**********************************************************************
|
|
|
|
[S1][Socket1][Channel1]
|
|
==========================
|
|
config parameters from SPD
|
|
==========================
|
|
[S0][Socket0][channel1]ReadDataEyeTraining...................................End
|
|
[S0][Socket0][channel1]WriteDataEyeTraining................................Start
|
|
|
|
[S1][Socket1][Channel1]DDR PHY PLL config.....................................OK
|
|
[S1][Socket1][channel1]Top module cfg.........................................OK
|
|
[S0][Socket0][channel1]WriteDataEyeTraining..................................End
|
|
[S0][Socket0][channel1]Phy Vref Training...................................Start
|
|
[S1][Socket1][channel1]Dmc init static........................................OK
|
|
[S1][Socket1][Channel1]Phy init dynamic....................................Start
|
|
[S1][Socket1][Channel1]Phy init dynamic.......................................OK
|
|
[S1][Socket1][Channel1][Dimm0] rcd init finished!
|
|
[S1][Socket1][Channel1][Dimm1] rcd init finished!
|
|
[S1][Socket1][Channel1][rank0] sdram init finished!
|
|
[S1][Socket1][Channel1][rank4] sdram init finished!
|
|
[S1][Socket1][channel1]Dram init..............................................OK
|
|
[S1][Socket1][channel1]Gate leveling.......................................Start
|
|
[S1][Socket1][channel1]Gate leveling.........................................End
|
|
[S1][Socket1][channel1]Write leveling......................................Start
|
|
[S1][Socket1][channel1]Write leveling........................................End
|
|
[S1][Socket1][channel1]Write leveling2.....................................Start
|
|
[S1][Socket1][channel1]Write leveling2.......................................End
|
|
[S1][Socket1][channel1]ReadDataEyeTraining.................................Start
|
|
[S1][Socket1][channel1]ReadDataEyeTraining...................................End
|
|
[S1][Socket1][channel1]WriteDataEyeTraining................................Start
|
|
[S1][Socket1][channel1]WriteDataEyeTraining..................................End
|
|
[S1][Socket1][channel1]Phy Vref Training...................................Start
|
|
[S0][Socket0][channel1]Phy Vref Training.....................................End
|
|
[S0][Socket0][channel1]ReadDataEyeTraining2................................Start
|
|
[S0][Socket0][channel1]ReadDataEyeTraining2..................................End
|
|
[S0][Socket0][channel1]Dram Vref Training..................................Start
|
|
[S1][Socket1][channel1]Phy Vref Training.....................................End
|
|
[S1][Socket1][channel1]ReadDataEyeTraining2................................Start
|
|
[S1][Socket1][channel1]ReadDataEyeTraining2..................................End
|
|
[S1][Socket1][channel1]Dram Vref Training..................................Start
|
|
[S0][Socket0][channel1]Dram Vref Training....................................End
|
|
[S0][Socket0][channel1]WriteDataEyeTraining2...............................Start
|
|
[S0][Socket0][channel1]WriteDataEyeTraining2.................................End
|
|
[S0][Socket0][Channel1]sfc test -------------------------------------------Start
|
|
[S0][Socket0][Channel1]sfc test ---------------------------------------------End
|
|
**********************************************************************
|
|
[S0][Socket0][Channel1] DDR Init Finished!
|
|
**********************************************************************
|
|
|
|
**********************************************************************
|
|
[S0][Socket0][channel2] Base:[0x40340000] Speed:[2133]
|
|
**********************************************************************
|
|
|
|
[S0][Socket0][Channel2]
|
|
==========================
|
|
config parameters from SPD
|
|
==========================
|
|
|
|
[S0][Socket0][Channel2]DDR PHY PLL config.....................................OK
|
|
[S0][Socket0][channel2]Top module cfg.........................................OK
|
|
[S0][Socket0][channel2]Dmc init static........................................OK
|
|
[S0][Socket0][Channel2]Phy init dynamic....................................Start
|
|
[S0][Socket0][Channel2]Phy init dynamic.......................................OK
|
|
[S0][Socket0][Channel2][Dimm0] rcd init finished!
|
|
[S0][Socket0][Channel2][Dimm1] rcd init finished!
|
|
[S0][Socket0][Channel2][rank0] sdram init finished!
|
|
[S0][Socket0][Channel2][rank4] sdram init finished!
|
|
[S0][Socket0][channel2]Dram init..............................................OK
|
|
[S0][Socket0][channel2]Gate leveling.......................................Start
|
|
[S0][Socket0][channel2]Gate leveling.........................................End
|
|
[S0][Socket0][channel2]Write leveling......................................Start
|
|
[S0][Socket0][channel2]Write leveling........................................End
|
|
[S0][Socket0][channel2]Write leveling2.....................................Start
|
|
[S0][Socket0][channel2]Write leveling2.......................................End
|
|
[S0][Socket0][channel2]ReadDataEyeTraining.................................Start
|
|
[S0][Socket0][channel2]ReadDataEyeTraining...................................End
|
|
[S0][Socket0][channel2]WriteDataEyeTraining................................Start
|
|
[S0][Socket0][channel2]WriteDataEyeTraining..................................End
|
|
[S0][Socket0][channel2]Phy Vref Training...................................Start
|
|
[S1][Socket1][channel1]Dram Vref Training....................................End
|
|
[S1][Socket1][channel1]WriteDataEyeTraining2...............................Start
|
|
[S1][Socket1][channel1]WriteDataEyeTraining2.................................End
|
|
[S1][Socket1][Channel1]sfc test -------------------------------------------Start
|
|
[S1][Socket1][Channel1]sfc test ---------------------------------------------End
|
|
**********************************************************************
|
|
[S1][Socket1][Channel1] DDR Init Finished!
|
|
**********************************************************************
|
|
|
|
**********************************************************************
|
|
[S1][Socket1][channel2] Base:[0x40040340000] Speed:[2133]
|
|
**********************************************************************
|
|
|
|
[S1][Socket1][Channel2]
|
|
==========================
|
|
config parameters from SPD
|
|
==========================
|
|
|
|
[S1][Socket1][Channel2]DDR PHY PLL config.....................................OK
|
|
[S1][Socket1][channel2]Top module cfg.........................................OK
|
|
[S1][Socket1][channel2]Dmc init static........................................OK
|
|
[S1][Socket1][Channel2]Phy init dynamic....................................Start
|
|
[S1][Socket1][Channel2]Phy init dynamic.......................................OK
|
|
[S1][Socket1][Channel2][Dimm0] rcd init finished!
|
|
[S1][Socket1][Channel2][Dimm1] rcd init finished!
|
|
[S0][Socket0][channel2]Phy Vref Training.....................................End
|
|
[S1][Socket1][Channel2][rank0] sdram init finished!
|
|
[S1][Socket1][Channel2][rank4] sdram init finished!
|
|
[S0][Socket0][channel2]ReadDataEyeTraining2................................Start
|
|
[S1][Socket1][channel2]Dram init..............................................OK
|
|
[S1][Socket1][channel2]Gate leveling.......................................Start
|
|
[S1][Socket1][channel2]Gate leveling.........................................End
|
|
[S1][Socket1][channel2]Write leveling......................................Start
|
|
[S1][Socket1][channel2]Write leveling........................................End
|
|
[S1][Socket1][channel2]Write leveling2.....................................Start
|
|
[S1][Socket1][channel2]Write leveling2.......................................End
|
|
[S1][Socket1][channel2]ReadDataEyeTraining.................................Start
|
|
[S1][Socket1][channel2]ReadDataEyeTraining...................................End
|
|
[S1][Socket1][channel2]WriteDataEyeTraining................................Start
|
|
[S1][Socket1][channel2]WriteDataEyeTraining..................................End
|
|
[S1][Socket1][channel2]Phy Vref Training...................................Start
|
|
[S0][Socket0][channel2]ReadDataEyeTraining2..................................End
|
|
[S0][Socket0][channel2]Dram Vref Training..................................Start
|
|
[S1][Socket1][channel2]Phy Vref Training.....................................End
|
|
[S1][Socket1][channel2]ReadDataEyeTraining2................................Start
|
|
[S0][Socket0][channel2]Dram Vref Training....................................End
|
|
[S0][Socket0][channel2]WriteDataEyeTraining2...............................Start
|
|
[S0][Socket0][channel2]WriteDataEyeTraining2.................................End
|
|
[S0][Socket0][Channel2]sfc test -------------------------------------------Start
|
|
[S0][Socket0][Channel2]sfc test ---------------------------------------------End
|
|
**********************************************************************
|
|
[S0][Socket0][Channel2] DDR Init Finished!
|
|
**********************************************************************
|
|
|
|
**********************************************************************
|
|
[S0][Socket0][channel3] Base:[0x40350000] Speed:[2133]
|
|
**********************************************************************
|
|
|
|
[S0][Socket0][Channel3]
|
|
==========================
|
|
config parameters from SPD
|
|
==========================
|
|
[S1][Socket1][channel2]ReadDataEyeTraining2..................................End
|
|
[S1][Socket1][channel2]Dram Vref Training..................................Start
|
|
|
|
[S0][Socket0][Channel3]DDR PHY PLL config.....................................OK
|
|
[S0][Socket0][channel3]Top module cfg.........................................OK
|
|
[S0][Socket0][channel3]Dmc init static........................................OK
|
|
[S0][Socket0][Channel3]Phy init dynamic....................................Start
|
|
[S0][Socket0][Channel3]Phy init dynamic.......................................OK
|
|
[S0][Socket0][Channel3][Dimm0] rcd init finished!
|
|
[S0][Socket0][Channel3][Dimm1] rcd init finished!
|
|
[S0][Socket0][Channel3][rank0] sdram init finished!
|
|
[S0][Socket0][Channel3][rank4] sdram init finished!
|
|
[S0][Socket0][channel3]Dram init..............................................OK
|
|
[S0][Socket0][channel3]Gate leveling.......................................Start
|
|
[S0][Socket0][channel3]Gate leveling.........................................End
|
|
[S0][Socket0][channel3]Write leveling......................................Start
|
|
[S0][Socket0][channel3]Write leveling........................................End
|
|
[S0][Socket0][channel3]Write leveling2.....................................Start
|
|
[S0][Socket0][channel3]Write leveling2.......................................End
|
|
[S0][Socket0][channel3]ReadDataEyeTraining.................................Start
|
|
[S0][Socket0][channel3]ReadDataEyeTraining...................................End
|
|
[S0][Socket0][channel3]WriteDataEyeTraining................................Start
|
|
[S0][Socket0][channel3]WriteDataEyeTraining..................................End
|
|
[S0][Socket0][channel3]Phy Vref Training...................................Start
|
|
[S1][Socket1][channel2]Dram Vref Training....................................End
|
|
[S1][Socket1][channel2]WriteDataEyeTraining2...............................Start
|
|
[S0][Socket0][channel3]Phy Vref Training.....................................End
|
|
[S0][Socket0][channel3]ReadDataEyeTraining2................................Start
|
|
[S1][Socket1][channel2]WriteDataEyeTraining2.................................End
|
|
[S1][Socket1][Channel2]sfc test -------------------------------------------Start
|
|
[S1][Socket1][Channel2]sfc test ---------------------------------------------End
|
|
**********************************************************************
|
|
[S1][Socket1][Channel2] DDR Init Finished!
|
|
**********************************************************************
|
|
|
|
**********************************************************************
|
|
[S1][Socket1][channel3] Base:[0x40040350000] Speed:[2133]
|
|
**********************************************************************
|
|
|
|
[S1][Socket1][Channel3]
|
|
==========================
|
|
config parameters from SPD
|
|
==========================
|
|
|
|
[S1][Socket1][Channel3]DDR PHY PLL config.....................................OK
|
|
[S1][Socket1][channel3]Top module cfg.........................................OK
|
|
[S1][Socket1][channel3]Dmc init static........................................OK
|
|
[S1][Socket1][Channel3]Phy init dynamic....................................Start
|
|
[S1][Socket1][Channel3]Phy init dynamic.......................................OK
|
|
[S1][Socket1][Channel3][Dimm0] rcd init finished!
|
|
[S1][Socket1][Channel3][Dimm1] rcd init finished!
|
|
[S1][Socket1][Channel3][rank0] sdram init finished!
|
|
[S1][Socket1][Channel3][rank4] sdram init finished!
|
|
[S1][Socket1][channel3]Dram init..............................................OK
|
|
[S1][Socket1][channel3]Gate leveling.......................................Start
|
|
[S1][Socket1][channel3]Gate leveling.........................................End
|
|
[S1][Socket1][channel3]Write leveling......................................Start
|
|
[S0][Socket0][channel3]ReadDataEyeTraining2..................................End
|
|
[S1][Socket1][channel3]Write leveling........................................End
|
|
[S0][Socket0][channel3]Dram Vref Training..................................Start
|
|
[S1][Socket1][channel3]Write leveling2.....................................Start
|
|
[S1][Socket1][channel3]Write leveling2.......................................End
|
|
[S1][Socket1][channel3]ReadDataEyeTraining.................................Start
|
|
[S1][Socket1][channel3]ReadDataEyeTraining...................................End
|
|
[S1][Socket1][channel3]WriteDataEyeTraining................................Start
|
|
[S1][Socket1][channel3]WriteDataEyeTraining..................................End
|
|
[S1][Socket1][channel3]Phy Vref Training...................................Start
|
|
[S1][Socket1][channel3]Phy Vref Training.....................................End
|
|
[S1][Socket1][channel3]ReadDataEyeTraining2................................Start
|
|
[S0][Socket0][channel3]Dram Vref Training....................................End
|
|
[S0][Socket0][channel3]WriteDataEyeTraining2...............................Start
|
|
[S0][Socket0][channel3]WriteDataEyeTraining2.................................End
|
|
[S0][Socket0][Channel3]sfc test -------------------------------------------Start
|
|
[S0][Socket0][Channel3]sfc test ---------------------------------------------End
|
|
**********************************************************************
|
|
[S0][Socket0][Channel3] DDR Init Finished!
|
|
**********************************************************************
|
|
[S1][Socket1][channel3]ReadDataEyeTraining2..................................End
|
|
[S1][Socket1][channel3]Dram Vref Training..................................Start
|
|
[S1][Socket1][channel3]Dram Vref Training....................................End
|
|
[S1][Socket1][channel3]WriteDataEyeTraining2...............................Start
|
|
[S1][Socket1][channel3]WriteDataEyeTraining2.................................End
|
|
[S1][Socket1][Channel3]sfc test -------------------------------------------Start
|
|
[S1][Socket1][Channel3]sfc test ---------------------------------------------End
|
|
**********************************************************************
|
|
[S1][Socket1][Channel3] DDR Init Finished!
|
|
**********************************************************************
|
|
|
|
|
|
------------------------------------------------------
|
|
[S0] Socket1 Core0 Reset
|
|
------------------------------------------------------
|
|
|
|
|
|
|
|
Quick Boot Enable, Do not Enter Memory Test:
|
|
socket[0] channel[0] rank[0] memory clean start...
|
|
socket[0] channel[1] rank[0] memory clean start...
|
|
socket[0] channel[2] rank[0] memory clean start...
|
|
socket[0] channel[3] rank[0] memory clean start...
|
|
socket[1] channel[0] rank[0] memory clean start...
|
|
socket[1] channel[1] rank[0] memory clean start...
|
|
socket[1] channel[2] rank[0] memory clean start...
|
|
socket[1] channel[3] rank[0] memory clean start...
|
|
all rank[0] memory clean ok!
|
|
|
|
socket[0] channel[0] rank[0] memory clean read start.
|
|
socket[0] channel[1] rank[0] memory clean read start.
|
|
socket[0] channel[2] rank[0] memory clean read start.
|
|
socket[0] channel[3] rank[0] memory clean read start.
|
|
socket[1] channel[0] rank[0] memory clean read start.
|
|
socket[1] channel[1] rank[0] memory clean read start.
|
|
socket[1] channel[2] rank[0] memory clean read start.
|
|
socket[1] channel[3] rank[0] memory clean read start.
|
|
all rank[0] memory clean read ok!
|
|
|
|
socket[0] channel[0] rank[4] memory clean start...
|
|
socket[0] channel[1] rank[4] memory clean start...
|
|
socket[0] channel[2] rank[4] memory clean start...
|
|
socket[0] channel[3] rank[4] memory clean start...
|
|
socket[1] channel[0] rank[4] memory clean start...
|
|
socket[1] channel[1] rank[4] memory clean start...
|
|
socket[1] channel[2] rank[4] memory clean start...
|
|
socket[1] channel[3] rank[4] memory clean start...
|
|
all rank[4] memory clean ok!
|
|
|
|
socket[0] channel[0] rank[4] memory clean read start.
|
|
socket[0] channel[1] rank[4] memory clean read start.
|
|
socket[0] channel[2] rank[4] memory clean read start.
|
|
socket[0] channel[3] rank[4] memory clean read start.
|
|
socket[1] channel[0] rank[4] memory clean read start.
|
|
socket[1] channel[1] rank[4] memory clean read start.
|
|
socket[1] channel[2] rank[4] memory clean read start.
|
|
socket[1] channel[3] rank[4] memory clean read start.
|
|
all rank[4] memory clean read ok!
|
|
|
|
================================================================================================
|
|
| socekt 0 |
|
|
================================================================================================
|
|
| Slot | Channel 0 | Channel 1 | Channel 2 | Channel 3 |
|
|
================================================================================================
|
|
| 0 | Micron | Micron | Micron | Micron |
|
|
| | IDT | IDT | IDT | IDT |
|
|
| | 8GB(1RX4) | 8GB(1RX4) | 8GB(1RX4) | 8GB(1RX4) |
|
|
| | 2133 | 2133 | 2133 | 2133 |
|
|
| | ww052015 | ww102014 | ww052015 | ww102014 |
|
|
| | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 |
|
|
| | | | | |
|
|
------------------------------------------------------------------------------------------------
|
|
| 1 | Micron | Micron | Micron | Micron |
|
|
| | IDT | IDT | IDT | IDT |
|
|
| | 8GB(1RX4) | 8GB(1RX4) | 8GB(1RX4) | 8GB(1RX4) |
|
|
| | 2133 | 2133 | 2133 | 2133 |
|
|
| | ww102014 | ww052015 | ww052015 | ww052015 |
|
|
| | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 |
|
|
| | | | | |
|
|
------------------------------------------------------------------------------------------------
|
|
| 2 | NO DIMM | NO DIMM | NO DIMM | NO DIMM |
|
|
| | | | | |
|
|
| | | | | |
|
|
| | | | | |
|
|
| | | | | |
|
|
| | | | | |
|
|
| | | | | |
|
|
------------------------------------------------------------------------------------------------
|
|
================================================================================================
|
|
| socekt 1 |
|
|
================================================================================================
|
|
| Slot | Channel 0 | Channel 1 | Channel 2 | Channel 3 |
|
|
================================================================================================
|
|
| 0 | Micron | Micron | Micron | Micron |
|
|
| | IDT | IDT | IDT | IDT |
|
|
| | 8GB(1RX4) | 8GB(1RX4) | 8GB(1RX4) | 8GB(1RX4) |
|
|
| | 2133 | 2133 | 2133 | 2133 |
|
|
| | ww102014 | ww102014 | ww102014 | ww052015 |
|
|
| | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 |
|
|
| | | | | |
|
|
------------------------------------------------------------------------------------------------
|
|
| 1 | Micron | Micron | Micron | Micron |
|
|
| | IDT | IDT | IDT | IDT |
|
|
| | 8GB(1RX4) | 8GB(1RX4) | 8GB(1RX4) | 8GB(1RX4) |
|
|
| | 2133 | 2133 | 2133 | 2133 |
|
|
| | ww052015 | ww102014 | ww102014 | ww052015 |
|
|
| | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 | 18ASF1G72PZ-2G1A2 |
|
|
| | | | | |
|
|
------------------------------------------------------------------------------------------------
|
|
| 2 | NO DIMM | NO DIMM | NO DIMM | NO DIMM |
|
|
| | | | | |
|
|
| | | | | |
|
|
| | | | | |
|
|
| | | | | |
|
|
| | | | | |
|
|
| | | | | |
|
|
------------------------------------------------------------------------------------------------
|
|
PlatfromIsRankOff: skt[0]: ch[3]: RankNum(1) CurrentDimmNum(2)
|
|
socket [0]: current odd ch [3]
|
|
PlatfromIsRankOff: skt[0]: ch[2]: RankNum(1) CurrentDimmNum(2)
|
|
socket [0]: current even ch [2]
|
|
PlatfromIsRankOff: skt[0]: ch[1]: RankNum(1) CurrentDimmNum(2)
|
|
socket [0]: current odd ch [1]
|
|
PlatfromIsRankOff: skt[0]: ch[0]: RankNum(1) CurrentDimmNum(2)
|
|
socket [0]: current even ch [0]
|
|
Enable Channel Interleave for socket[0]
|
|
PlatfromIsRankOff: skt[0]: ch[3]: RankNum(1) CurrentDimmNum(2)
|
|
socket [0]: current odd ch [3]
|
|
PlatfromIsRankOff: skt[0]: ch[2]: RankNum(1) CurrentDimmNum(2)
|
|
socket [0]: current even ch [2]
|
|
PlatfromIsRankOff: skt[0]: ch[0]: RankNum(1) CurrentDimmNum(2)
|
|
socket [0]: current even ch [0]
|
|
Enable Channel Interleave for socket[0]
|
|
socket[0]: InterleaveEn[0] = 1
|
|
socket[0]: InterleaveEn[1] = 1
|
|
PlatfromIsRankOff: skt[0]: ch[3]: RankNum(1) CurrentDimmNum(2)
|
|
PlatfromIsRankOff: skt[0]: ch[2]: RankNum(1) CurrentDimmNum(2)
|
|
PlatfromIsRankOff: skt[0]: ch[1]: RankNum(1) CurrentDimmNum(2)
|
|
PlatfromIsRankOff: skt[0]: ch[0]: RankNum(1) CurrentDimmNum(2)
|
|
TA DDR0 Size = 0x4000
|
|
TA DDR1 Size = 0x4000
|
|
TB DDR0 Size = 0x4000
|
|
TB DDR1 Size = 0x4000
|
|
socket [0] : Enable Die Interleave
|
|
socket[0]: DieInterleaveEn = 1
|
|
ch[3]: ToConfigDaw
|
|
Init Numa info: NodeId = 0, Base = 0x0, Size = 0x40000000, DieInterLeaveEn = 1
|
|
Daw Config :Skt 0 Ch: 3 , Base = 0x0, Size = 0x40000000, DieInterLeaveEn = 1
|
|
socket[0]: ch[3]: DawIndex = 0
|
|
ch[3]: ToConfigDaw
|
|
ColBits = 0xA
|
|
RowBits = 0x10
|
|
Banknum = 0x10
|
|
RankSize = 0x200000000
|
|
Ranknum = 0x1
|
|
DramWidth = 0x4
|
|
Size = 0x1000000000
|
|
socket[0]: ch[3]: DawIndex = 1
|
|
DirBase = 1FFC000000
|
|
DieInterleaveEn = 1
|
|
DieB, ch = 3 HHA [1]
|
|
DieA, ch = 3 HHA [1]
|
|
ch = 3 InterleaveEn[i/2] = 1
|
|
DieB, ch = 3 HHA [0]
|
|
DieA, ch = 3 HHA [0]
|
|
Init Numa info: NodeId = 0, Base = 0x1000000000, Size = 0x1000000000, DieInterLeaveEn = 1
|
|
Daw Config: Skt 0 Ch: 3 , Base = 0x1000000000, Size = 0x1000000000, DieInterLeaveEn = 1
|
|
LowMemory(<4G):Base=0x0, Size=0x40000000
|
|
HighMemory(>4G):Base=0x1040000000, Size=0x7C0000000
|
|
HighMemory(>4G):Base=0x1040000000, Size=0x7C0000000
|
|
HighMemory(>4G):Base=0x1800000000, Size=0x7FC000000
|
|
ch[2]: not ToConfigDaw
|
|
ch[1]: not ToConfigDaw
|
|
ch[0]: not ToConfigDaw
|
|
Die Interleave Enable
|
|
PlatfromIsRankOff: skt[1]: ch[3]: RankNum(1) CurrentDimmNum(2)
|
|
socket [1]: current odd ch [3]
|
|
PlatfromIsRankOff: skt[1]: ch[2]: RankNum(1) CurrentDimmNum(2)
|
|
socket [1]: current even ch [2]
|
|
PlatfromIsRankOff: skt[1]: ch[1]: RankNum(1) CurrentDimmNum(2)
|
|
socket [1]: current odd ch [1]
|
|
PlatfromIsRankOff: skt[1]: ch[0]: RankNum(1) CurrentDimmNum(2)
|
|
socket [1]: current even ch [0]
|
|
Enable Channel Interleave for socket[1]
|
|
PlatfromIsRankOff: skt[1]: ch[3]: RankNum(1) CurrentDimmNum(2)
|
|
socket [1]: current odd ch [3]
|
|
PlatfromIsRankOff: skt[1]: ch[2]: RankNum(1) CurrentDimmNum(2)
|
|
socket [1]: current even ch [2]
|
|
PlatfromIsRankOff: skt[1]: ch[1]: RankNum(1) CurrentDimmNum(2)
|
|
socket [1]: current odd ch [1]
|
|
PlatfromIsRankOff: skt[1]: ch[0]: RankNum(1) CurrentDimmNum(2)
|
|
socket [1]: current even ch [0]
|
|
Enable Channel Interleave for socket[1]
|
|
socket[1]: InterleaveEn[0] = 1
|
|
socket[1]: InterleaveEn[1] = 1
|
|
PlatfromIsRankOff: skt[1]: ch[3]: RankNum(1) CurrentDimmNum(2)
|
|
PlatfromIsRankOff: skt[1]: ch[2]: RankNum(1) CurrentDimmNum(2)
|
|
PlatfromIsRankOff: skt[1]: ch[1]: RankNum(1) CurrentDimmNum(2)
|
|
PlatfromIsRankOff: skt[1]: ch[0]: RankNum(1) CurrentDimmNum(2)
|
|
TA DDR0 Size = 0x4000
|
|
TA DDR1 Size = 0x4000
|
|
TB DDR0 Size = 0x4000
|
|
TB DDR1 Size = 0x4000
|
|
socket [1] : Enable Die Interleave
|
|
socket[1]: DieInterleaveEn = 1
|
|
ch[3]: ToConfigDaw
|
|
ColBits = 0xA
|
|
RowBits = 0x10
|
|
Banknum = 0x10
|
|
RankSize = 0x200000000
|
|
Ranknum = 0x1
|
|
DramWidth = 0x4
|
|
Size = 0x1000000000
|
|
socket[1]: ch[3]: DawIndex = 0
|
|
DirBase = 1FFC000000
|
|
DieInterleaveEn = 1
|
|
DieB, ch = 3 HHA [1]
|
|
DieA, ch = 3 HHA [1]
|
|
ch = 3 InterleaveEn[i/2] = 1
|
|
DieB, ch = 3 HHA [0]
|
|
DieA, ch = 3 HHA [0]
|
|
Init Numa info: NodeId = 2, Base = 0x9000000000, Size = 0x1000000000, DieInterLeaveEn = 1
|
|
Daw Config: Skt 1 Ch: 3 , Base = 0x1000000000, Size = 0x1000000000, DieInterLeaveEn = 1
|
|
HighMemory(>4G):Base=0x9000000000, Size=0xFFC000000
|
|
ch[2]: not ToConfigDaw
|
|
ch[1]: not ToConfigDaw
|
|
ch[0]: not ToConfigDaw
|
|
Die Interleave Enable
|
|
|
|
Start config RAS or ECC.
|
|
pGblData->mem.rascBypass = 1
|
|
pGblData->mem.demandScrubMode = 0
|
|
pGblData->mem.patrolScrubMode = 1
|
|
skt[0] ch[0] ecc enable.
|
|
skt[0] ch[1] ecc enable.
|
|
skt[0] ch[2] ecc enable.
|
|
skt[0] ch[3] ecc enable.
|
|
skt[1] ch[0] ecc enable.
|
|
skt[1] ch[1] ecc enable.
|
|
skt[1] ch[2] ecc enable.
|
|
skt[1] ch[3] ecc enable.
|
|
Finish config RAS or ECC.
|
|
|
|
Clean ddrc or rasc interrupt OK
|
|
Loading PEIM at 0x0003FBD7160 EntryPoint=0x0003FBD7240 PeiCore.efi
|
|
Loading PEIM at 0x0003FBD2160 EntryPoint=0x0003FBD2240 CpuPei.efi
|
|
Loading PEIM at 0x0003FBCC160 EntryPoint=0x0003FBCC240 StatusCodePei.efi
|
|
Loading PEIM at 0x0003FBC1160 EntryPoint=0x0003FBC1240 DxeIpl.efi
|
|
Loading PEIM at 0x0003EDBB000 EntryPoint=0x0003EDBB800 DxeCore.efi
|
|
Loading DXE CORE at 0x0003EDBB000 EntryPoint=0x0003EDBB800
|
|
HOBLIST address in DXE = 0x3EB97018
|
|
Memory Allocation 0x00000004 0x3FBFF000 - 0x3FBFFFFF
|
|
Memory Allocation 0x00000004 0x3FBFE000 - 0x3FBFEFFF
|
|
Memory Allocation 0x00000004 0x3FBFD000 - 0x3FBFDFFF
|
|
Memory Allocation 0x00000004 0x3FBFC000 - 0x3FBFCFFF
|
|
Memory Allocation 0x00000004 0x3FBFB000 - 0x3FBFBFFF
|
|
Memory Allocation 0x00000004 0x3FBFA000 - 0x3FBFAFFF
|
|
Memory Allocation 0x00000004 0x3FBF9000 - 0x3FBF9FFF
|
|
Memory Allocation 0x00000004 0x3FBF8000 - 0x3FBF8FFF
|
|
Memory Allocation 0x00000004 0x3FBF7000 - 0x3FBF7FFF
|
|
Memory Allocation 0x00000004 0x3FBF6000 - 0x3FBF6FFF
|
|
Memory Allocation 0x00000004 0x3FBF5000 - 0x3FBF5FFF
|
|
Memory Allocation 0x00000004 0x3FBF4000 - 0x3FBF4FFF
|
|
Memory Allocation 0x00000004 0x3FBF3000 - 0x3FBF3FFF
|
|
Memory Allocation 0x00000004 0x3FBF2000 - 0x3FBF2FFF
|
|
Memory Allocation 0x00000004 0x3FBF1000 - 0x3FBF1FFF
|
|
Memory Allocation 0x00000004 0x3FBF0000 - 0x3FBF0FFF
|
|
Memory Allocation 0x00000004 0x3FBEF000 - 0x3FBEFFFF
|
|
Memory Allocation 0x00000004 0x3ED9B000 - 0x3EDBAFFF
|
|
Memory Allocation 0x00000004 0x3FBD7000 - 0x3FBEEFFF
|
|
Memory Allocation 0x00000004 0x3FBD2000 - 0x3FBD6FFF
|
|
Memory Allocation 0x00000004 0x3FBCC000 - 0x3FBD1FFF
|
|
Memory Allocation 0x00000004 0x3FBC1000 - 0x3FBCBFFF
|
|
Memory Allocation 0x00000004 0x3FBB1000 - 0x3FBC0FFF
|
|
Memory Allocation 0x00000004 0x3F4CB000 - 0x3FBB0FFF
|
|
Memory Allocation 0x00000004 0x3EDE6000 - 0x3F4CAFFF
|
|
Memory Allocation 0x00000004 0x3EDBB000 - 0x3EDE5FFF
|
|
Memory Allocation 0x00000003 0x3EDBB000 - 0x3EDE5FFF
|
|
Memory Allocation 0x00000004 0x3ED9B000 - 0x3EDBAFFF
|
|
Memory Allocation 0x00000004 0x2FC00000 - 0x2FC1FFFF
|
|
FV Hob 0xA4AF0000 - 0xA4DEFFFF
|
|
FV Hob 0x3EDE6000 - 0x3F4CAD3F
|
|
FV2 Hob 0x3EDE6000 - 0x3F4CAD3F
|
|
Loading driver at 0x0003ED26000 EntryPoint=0x0003ED26280 PcdDxe.efi
|
|
Loading driver at 0x0003ED10000 EntryPoint=0x0003ED10280 IoInitDxe.efi
|
|
[serdes_hilink2_init]:hilink2_mode pcie2 8 lane
|
|
Halt Macro 2 MCU!!
|
|
Macro 2 Download Firmware Success!!
|
|
Release Macro 2 MCU!!
|
|
Temperature: 31 (0x1F)
|
|
Temperature Set 31
|
|
Temperature: 31 (0x1F)
|
|
Temperature Set 31
|
|
[serdes_init]:SerDes2 init success!
|
|
Halt Macro 3 MCU!!
|
|
Macro 3 Download Firmware Success!!
|
|
Release Macro 3 MCU!!
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
[serdes_init]:SerDes3 init success!
|
|
Halt Macro 4 MCU!!
|
|
Macro 4 Download Firmware Success!!
|
|
Release Macro 4 MCU!!
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
[serdes_init]:SerDes4 init success!
|
|
[serdes_hilink5_init]:hilink5_mode sas1 4 lane
|
|
Halt Macro 5 MCU!!
|
|
Macro 5 Download Firmware Success!!
|
|
Release Macro 5 MCU!!
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
[serdes_init]:SerDes5 init success!
|
|
[serdes_hilink6_init] lane 0 =>sas1 lane 0
|
|
[serdes_hilink6_init] lane 1 =>sas1 lane 1
|
|
[serdes_hilink6_init] lane 2 =>sas1 lane 2
|
|
[serdes_hilink6_init] lane 3 =>sas1 lane 3
|
|
Halt Macro 6 MCU!!
|
|
Macro 6 Download Firmware Success!!
|
|
Release Macro 6 MCU!!
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
[serdes_init]:SerDes6 init success!
|
|
[serdes_init]: MP Macro: 0 reset_and_power_up skip !
|
|
[serdes_init]: MP Macro: 1 reset_and_power_up skip !
|
|
[serdes_init]: MP Macro: 2 reset_and_power_up skip !
|
|
[serdes_init]: MP Macro: 3 reset_and_power_up skip !
|
|
[serdes_init]: MP Macro: 4 reset_and_power_up skip !
|
|
[serdes_init]: MP Macro: 5 reset_and_power_up skip !
|
|
[serdes_init]: MP Macro: 6 reset_and_power_up skip !
|
|
[serdes_hilink0_init]:hilink0_mode pcie5 8 lane
|
|
Halt Macro 0 MCU!!
|
|
Macro 0 Download Firmware Success!!
|
|
Release Macro 0 MCU!!
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
[serdes_init]:SerDes0 init success!
|
|
[serdes_hilink1_init]:hilink1_mode pcie4 8 lane
|
|
Halt Macro 1 MCU!!
|
|
Macro 1 Download Firmware Success!!
|
|
Release Macro 1 MCU!!
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
[serdes_init]:SerDes1 init success!
|
|
MP [serdes_init]:SerDes5 init skip !
|
|
[serdes_hilink6_init] lane 0 =>sas5 lane 0
|
|
[serdes_hilink6_init] lane 1 =>sas5 lane 1
|
|
Halt Macro 6 MCU!!
|
|
Macro 6 Download Firmware Success!!
|
|
Release Macro 6 MCU!!
|
|
Temperature: 31 (0x1F)
|
|
Temperature Set 31
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
[serdes_init]:SerDes6 init success!
|
|
[serdes_hilink2_init]:hilink2_mode pcie2 8 lane
|
|
Halt Macro 2 MCU!!
|
|
Macro 2 Download Firmware Success!!
|
|
Release Macro 2 MCU!!
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
[serdes_init]:SerDes2 init success!
|
|
Halt Macro 3 MCU!!
|
|
Macro 3 Download Firmware Success!!
|
|
Release Macro 3 MCU!!
|
|
Temperature: 31 (0x1F)
|
|
Temperature Set 31
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
[serdes_init]:SerDes3 init success!
|
|
Halt Macro 4 MCU!!
|
|
Macro 4 Download Firmware Success!!
|
|
Release Macro 4 MCU!!
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
[serdes_init]:SerDes4 init success!
|
|
[serdes_hilink5_init]:hilink5_mode sas1 4 lane
|
|
Halt Macro 5 MCU!!
|
|
Macro 5 Download Firmware Success!!
|
|
Release Macro 5 MCU!!
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
[serdes_init]:SerDes5 init success!
|
|
[serdes_hilink6_init] lane 0 =>sas2 lane 0
|
|
[serdes_hilink6_init] lane 1 =>sas2 lane 1
|
|
[serdes_hilink6_init] lane 2 =>sas2 lane 2
|
|
[serdes_hilink6_init] lane 3 =>sas2 lane 3
|
|
Halt Macro 6 MCU!!
|
|
Macro 6 Download Firmware Success!!
|
|
Release Macro 6 MCU!!
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
Temperature: 32 (0x20)
|
|
Temperature Set 32
|
|
[serdes_init]:SerDes6 init success!
|
|
[serdes_hilink0_init]:hilink0_mode pcie5 8 lane
|
|
Halt Macro 0 MCU!!
|
|
Macro 0 Download Firmware Success!!
|
|
Release Macro 0 MCU!!
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
[serdes_init]:SerDes0 init success!
|
|
[serdes_hilink1_init]:hilink1_mode pcie4 8 lane
|
|
Halt Macro 1 MCU!!
|
|
Macro 1 Download Firmware Success!!
|
|
Release Macro 1 MCU!!
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
[serdes_init]:SerDes1 init success!
|
|
[serdes_hilink5_init]:hilink5_mode pcie6 1 lane and pcie7 1 lane
|
|
Halt Macro 5 MCU!!
|
|
Macro 5 Download Firmware Success!!
|
|
Release Macro 5 MCU!!
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
[serdes_init]:SerDes5 init success!
|
|
[serdes_hilink6_init] lane 0 =>sas5 lane 0
|
|
[serdes_hilink6_init] lane 1 =>sas5 lane 1
|
|
Halt Macro 6 MCU!!
|
|
Macro 6 Download Firmware Success!!
|
|
Release Macro 6 MCU!!
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
Temperature: 30 (0x1E)
|
|
Temperature Set 30
|
|
[serdes_init]:SerDes6 init success!
|
|
Loading driver at 0x0003ED05000 EntryPoint=0x0003ED05840 ArmCpuDxe.efi
|
|
Loading driver at 0x00039D10000 EntryPoint=0x00039D20040 RuntimeDxe.efi
|
|
Loading driver at 0x0003ECFF000 EntryPoint=0x0003ECFF280 SecurityStubDxe.efi
|
|
Loading driver at 0x00039C70000 EntryPoint=0x00039C80040 SFCDriver.efi
|
|
Loading driver at 0x0003ECF6000 EntryPoint=0x0003ECF6280 OemNicConfigPangea.efi
|
|
Loading driver at 0x00039BD0000 EntryPoint=0x00039BE0040 VariableRuntimeDxe.efi
|
|
Loading driver at 0x00039B10000 EntryPoint=0x00039B20040 EmbeddedMonotonicCounter.efi
|
|
Loading driver at 0x00039A70000 EntryPoint=0x00039A80040 StatusCodeRuntimeDxe.efi
|
|
Loading driver at 0x000399D0000 EntryPoint=0x000399E0040 Reset.efi
|
|
Loading driver at 0x00039930000 EntryPoint=0x00039940040 RealTimeClock.efi
|
|
Creat event for cpld Success .
|
|
Now RTC Time is : 2021-10-25 15:11:23
|
|
Loading driver at 0x0003ECF1000 EntryPoint=0x0003ECF1280 MetronomeDxe.efi
|
|
Loading driver at 0x0003ECD1000 EntryPoint=0x0003ECD1280 HiiDatabase.efi
|
|
Loading driver at 0x0003ECCC000 EntryPoint=0x0003ECCC280 SerialDxe.efi
|
|
Loading driver at 0x0003ECC3000 EntryPoint=0x0003ECC3280 L1CacheDxe.efi
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFE
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x1
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFE
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1DC
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFF
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x0
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFF
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFF
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x0
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFF
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFF
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x0
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFF
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
L1 Dcache Test.......................................PASS
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFE
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x1
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFE
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1DC
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFF
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x0
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFF
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFF
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x0
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFF
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFF
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x0
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFF
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
L1 Icache Test.......................................PASS
|
|
Loading driver at 0x0003ECBB000 EntryPoint=0x0003ECBB280 L2cacheDxe.efi
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFE
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x1
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFE
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1DC
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFF
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x0
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFF
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFF
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x0
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFF
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:0x6100 Status Reg is 0xFFFF
|
|
[PrintCoreStatus]:0x6104 Status Reg is 0x0
|
|
[PrintCoreStatus]:0x6108 Status Reg is 0x0
|
|
[PrintCoreStatus]:SC_CPU_STANDBYWFI_ST is 0xFFFF
|
|
[PrintCoreStatus]:SC_CLUS0_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS1_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS2_CRG_RESET_ST is 0x1FE
|
|
[PrintCoreStatus]:SC_CLUS3_CRG_RESET_ST is 0x1FE
|
|
L2 cache Test........................................PASS
|
|
Loading driver at 0x0003ECB6000 EntryPoint=0x0003ECB6280 SP805WatchdogDxe.efi
|
|
Loading driver at 0x0003ECAF000 EntryPoint=0x0003ECAF280 IpmiInterfaceDxe.efi
|
|
Loading driver at 0x0003ECA9000 EntryPoint=0x0003ECA9280 GetInfoFromBmc.efi
|
|
InfoFromBmc.ProductName TaiShan 2280
|
|
InfoFromBmc.SerialNum To be filled by O.E.M.
|
|
InfoFromBmc.ManufactureType02 Huawei
|
|
InfoFromBmc.ProductName02
|
|
InfoFromBmc.AssetTag To be filled by O.E.M.
|
|
InfoFromBmc.SrNumType02 To be filled by O.E.M.
|
|
InfoFromBmc.AssetTagType03 To be filled by O.E.M.
|
|
InfoFromBmc.SrNumType03 To be filled by O.E.M.
|
|
InfoFromBmc.VersionType03 To be filled by O.E.M.
|
|
InfoFromBmc.ChassisType03
|
|
InfoFromBmc.ManufacturerType03 Huawei
|
|
Loading driver at 0x0003ECA1000 EntryPoint=0x0003ECA1280 SmbiosDxe.efi
|
|
Loading driver at 0x0003EC96000 EntryPoint=0x0003EC96280 AcpiTableDxe.efi
|
|
Loading driver at 0x0003EC91000 EntryPoint=0x0003EC91280 DpcDxe.efi
|
|
Loading driver at 0x0003EC8C000 EntryPoint=0x0003EC8C280 NullMemoryTestDxe.efi
|
|
Loading driver at 0x0003EC7F000 EntryPoint=0x0003EC7F280 UpdateFdtDxe.efi
|
|
MemoryTestInit done!
|
|
fdtfileaddress:--------- 0xA47A0000
|
|
IsolatedCoreNum 0
|
|
IsolatedClusterNum 0
|
|
IsolatedClusterNum FFFFFFFF
|
|
IsolatedCoreNum 0
|
|
IsolatedClusterNum 0
|
|
IsolatedClusterNum FFFFFFFF
|
|
Port0:0x0 0x18 0x85 0x0 0x0 0xE0
|
|
find ethernet@0 node ok!
|
|
Port1:0x0 0x18 0x85 0x1 0x0 0xE0
|
|
find ethernet@1 node ok!
|
|
Port4:0x0 0x18 0x85 0x4 0x0 0xE0
|
|
find ethernet@4 node ok!
|
|
Port5:0x0 0x18 0x85 0x5 0x0 0xE0
|
|
find ethernet@5 node ok!
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
IpmiCmdReportMAC Port 1 type 1 MAC: 0 18 85 0 0 E0
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
IpmiCmdReportMAC Port 2 type 1 MAC: 0 18 85 1 0 E0
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
IpmiCmdReportMAC Port 3 type 2 MAC: 0 18 85 4 0 E0
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
IpmiCmdReportMAC Port 4 type 2 MAC: 0 18 85 5 0 E0
|
|
CoreGetMemoryMap: MapKey(3EDBAC80) = 16A, mMemoryMapKey(3EDE4B98) = 16A.
|
|
CoreGetMemoryMap: MapKey(3EDBAC80) = 16B, mMemoryMapKey(3EDE4B98) = 16B.
|
|
FdtUpdateAtNuma setup Enabled
|
|
Soc0 DieInterweave Enable
|
|
Soc1 DieInterweave Enable
|
|
DawNum[0] = 2,DawNum[1] = 0,DawNum[2] =1,DawNum[3] =0
|
|
0 Base = 0x0, Size = 0x40000000
|
|
0 Base = 0x1000000000, Size = 0x1000000000
|
|
2 Base = 0x9000000000, Size = 0x1000000000
|
|
NewFdtBlobBase: 0x398A0000 NewFdtBlobSize:0x11BEC
|
|
FDTConfigTable Address: 0x398A0000
|
|
Loading driver at 0x0003EC79000 EntryPoint=0x0003EC79280 PciMaxPayLoadConfig.efi
|
|
Create event for Pci MaxPayLoad Config success.
|
|
Loading driver at 0x0003EC6A000 EntryPoint=0x0003EC6A280 DevicePathDxe.efi
|
|
Loading driver at 0x00039850000 EntryPoint=0x00039860040 FlashFvbDxe.efi
|
|
Loading driver at 0x0003EC61000 EntryPoint=0x0003EC61280 FaultTolerantWriteDxe.efi
|
|
Loading driver at 0x0003EC5B000 EntryPoint=0x0003EC5B280 ArmGicDxe.efi
|
|
Loading driver at 0x0003EC51000 EntryPoint=0x0003EC51280 SmbiosMiscDxe.efi
|
|
Loading driver at 0x0003EC4B000 EntryPoint=0x0003EC4B280 TransSmbiosInfo.efi
|
|
Create ReportBmc event for smbios table transfer success.
|
|
Loading driver at 0x0003EC44000 EntryPoint=0x0003EC44280 IpmiMiscOp.efi
|
|
VerStr:1.50
|
|
Create event for miscellaneous ipmi operation success.
|
|
Loading driver at 0x0003EC3F000 EntryPoint=0x0003EC3F280 IpmiWatchdogDxe.efi
|
|
Loading driver at 0x0003EC35000 EntryPoint=0x0003EC35280 MemorySubClass.efi
|
|
Loading driver at 0x0003EC2C000 EntryPoint=0x0003EC2C280 ProcessorSubClass.efi
|
|
Loading driver at 0x0003EC24000 EntryPoint=0x0003EC24280 EquipmentRankMargin.efi
|
|
Equipment Margin test is not enbale.
|
|
Loading driver at 0x0003EC1B000 EntryPoint=0x0003EC1B280 AcpiPlatform.efi
|
|
Current NUMA config:<Enabled>
|
|
|
|
SRAT: Updating SRAT memory information!
|
|
|
|
SRAT: Updating SRAT Gicc information!
|
|
SRAT:GicNodeMask = FFFFFFFF
|
|
There are no invalid Gic node
|
|
|
|
SRAT: Updating Madt Gicc information!
|
|
MADT:GicNodeMask = FFFFFFFF
|
|
There are no invalid Gic node
|
|
install table end
|
|
Updating Ethernet MAC in ACPI DSDT...
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
Port 4 MAC 00:18:85:04:00:E0
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
Port 5 MAC 00:18:85:05:00:E0
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
Port 0 MAC 00:18:85:00:00:E0
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
Port 1 MAC 00:18:85:01:00:E0
|
|
Updating Cpu Num in ACPI DSDT...
|
|
DSDT:GicNodeMask = FFFFFFFF
|
|
Loading driver at 0x0003EC16000 EntryPoint=0x0003EC16280 SaveMemoryConfigDxe.efi
|
|
Loading driver at 0x0003EBF4000 EntryPoint=0x0003EBF4280 SetupBrowser.efi
|
|
Loading driver at 0x0003EBB2000 EntryPoint=0x0003EBB2280 BdsDxe.efi
|
|
Loading driver at 0x000396F8000 EntryPoint=0x000396F8280 BmcSetSetupDxe.efi
|
|
Loading driver at 0x000396A0000 EntryPoint=0x000396B0040 CapsuleRuntimeDxe.efi
|
|
Loading driver at 0x0003EBAD000 EntryPoint=0x0003EBAD280 ArmTimerDxe.efi
|
|
Loading driver at 0x0003EBA3000 EntryPoint=0x0003EBA3280 SysPassword.efi
|
|
Loading driver at 0x00039D61000 EntryPoint=0x00039D61280 PcieInitDxe.efi
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 0, Port 2 link up failed
|
|
Ltssm tracer host 0 port2 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 0 port2 next wr addr: 8000.
|
|
HostBridge 0, Pcie Port 2 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 0, Port 2 link up failed
|
|
Ltssm tracer host 0 port2 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 0 port2 next wr addr: 8000.
|
|
HostBridge 0, Pcie Port 2 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 0, Port 4 link up failed
|
|
Ltssm tracer host 0 port4 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 0 port4 next wr addr: 8000.
|
|
HostBridge 0, Pcie Port 4 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 0, Port 4 link up failed
|
|
Ltssm tracer host 0 port4 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 0 port4 next wr addr: 8000.
|
|
HostBridge 0, Pcie Port 4 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 0, Port 5 link up failed
|
|
Ltssm tracer host 0 port5 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 0 port5 next wr addr: 8000.
|
|
HostBridge 0, Pcie Port 5 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 0, Port 5 link up failed
|
|
Ltssm tracer host 0 port5 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 0 port5 next wr addr: 8000.
|
|
HostBridge 0, Pcie Port 5 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 0, Port 6 link up failed
|
|
Ltssm tracer host 0 port6 next wr addr: 5.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 6
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 2
|
|
04 0 1 0 0 0 F 3
|
|
05 0 0 0 0 0 0 0
|
|
06 0 0 0 0 0 0 0
|
|
07 0 0 0 0 0 0 0
|
|
08 0 0 0 0 0 0 0
|
|
09 0 0 0 0 0 0 0
|
|
0A 0 0 0 0 0 0 0
|
|
0B 0 0 0 0 0 0 0
|
|
0C 0 0 0 0 0 0 0
|
|
0D 0 0 0 0 0 0 0
|
|
0E 0 0 0 0 0 0 0
|
|
0F 0 0 0 0 0 0 0
|
|
10 0 0 0 0 0 0 0
|
|
11 0 0 0 0 0 0 0
|
|
12 0 0 0 0 0 0 0
|
|
13 0 0 0 0 0 0 0
|
|
14 0 0 0 0 0 0 0
|
|
15 0 0 0 0 0 0 0
|
|
16 0 0 0 0 0 0 0
|
|
17 0 0 0 0 0 0 0
|
|
18 0 0 0 0 0 0 0
|
|
19 0 0 0 0 0 0 0
|
|
1A 0 0 0 0 0 0 0
|
|
1B 0 0 0 0 0 0 0
|
|
1C 0 0 0 0 0 0 0
|
|
1D 0 0 0 0 0 0 0
|
|
1E 0 0 0 0 0 0 0
|
|
1F 0 0 0 0 0 0 0
|
|
20 0 0 0 0 0 0 0
|
|
21 0 0 0 0 0 0 0
|
|
22 0 0 0 0 0 0 0
|
|
23 0 0 0 0 0 0 0
|
|
24 0 0 0 0 0 0 0
|
|
25 0 0 0 0 0 0 0
|
|
26 0 0 0 0 0 0 0
|
|
27 0 0 0 0 0 0 0
|
|
28 0 0 0 0 0 0 0
|
|
29 0 0 0 0 0 0 0
|
|
2A 0 0 0 0 0 0 0
|
|
2B 0 0 0 0 0 0 0
|
|
2C 0 0 0 0 0 0 0
|
|
2D 0 0 0 0 0 0 0
|
|
2E 0 0 0 0 0 0 0
|
|
2F 0 0 0 0 0 0 0
|
|
30 0 0 0 0 0 0 0
|
|
31 0 0 0 0 0 0 0
|
|
32 0 0 0 0 0 0 0
|
|
33 0 0 0 0 0 0 0
|
|
34 0 0 0 0 0 0 0
|
|
35 0 0 0 0 0 0 0
|
|
36 0 0 0 0 0 0 0
|
|
37 0 0 0 0 0 0 0
|
|
38 0 0 0 0 0 0 0
|
|
39 0 0 0 0 0 0 0
|
|
3A 0 0 0 0 0 0 0
|
|
3B 0 0 0 0 0 0 0
|
|
3C 0 0 0 0 0 0 0
|
|
3D 0 0 0 0 0 0 0
|
|
3E 0 0 0 0 0 0 0
|
|
3F 0 0 0 0 0 0 0
|
|
*********************************************
|
|
Ltssm tracer host 0 port6 next wr addr: 0.
|
|
HostBridge 0, Pcie Port 6 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 0, Port 6 link up failed
|
|
Ltssm tracer host 0 port6 next wr addr: 5.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 6
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 2
|
|
04 0 1 0 0 0 F 3
|
|
05 0 0 0 0 0 0 0
|
|
06 0 0 0 0 0 0 0
|
|
07 0 0 0 0 0 0 0
|
|
08 0 0 0 0 0 0 0
|
|
09 0 0 0 0 0 0 0
|
|
0A 0 0 0 0 0 0 0
|
|
0B 0 0 0 0 0 0 0
|
|
0C 0 0 0 0 0 0 0
|
|
0D 0 0 0 0 0 0 0
|
|
0E 0 0 0 0 0 0 0
|
|
0F 0 0 0 0 0 0 0
|
|
10 0 0 0 0 0 0 0
|
|
11 0 0 0 0 0 0 0
|
|
12 0 0 0 0 0 0 0
|
|
13 0 0 0 0 0 0 0
|
|
14 0 0 0 0 0 0 0
|
|
15 0 0 0 0 0 0 0
|
|
16 0 0 0 0 0 0 0
|
|
17 0 0 0 0 0 0 0
|
|
18 0 0 0 0 0 0 0
|
|
19 0 0 0 0 0 0 0
|
|
1A 0 0 0 0 0 0 0
|
|
1B 0 0 0 0 0 0 0
|
|
1C 0 0 0 0 0 0 0
|
|
1D 0 0 0 0 0 0 0
|
|
1E 0 0 0 0 0 0 0
|
|
1F 0 0 0 0 0 0 0
|
|
20 0 0 0 0 0 0 0
|
|
21 0 0 0 0 0 0 0
|
|
22 0 0 0 0 0 0 0
|
|
23 0 0 0 0 0 0 0
|
|
24 0 0 0 0 0 0 0
|
|
25 0 0 0 0 0 0 0
|
|
26 0 0 0 0 0 0 0
|
|
27 0 0 0 0 0 0 0
|
|
28 0 0 0 0 0 0 0
|
|
29 0 0 0 0 0 0 0
|
|
2A 0 0 0 0 0 0 0
|
|
2B 0 0 0 0 0 0 0
|
|
2C 0 0 0 0 0 0 0
|
|
2D 0 0 0 0 0 0 0
|
|
2E 0 0 0 0 0 0 0
|
|
2F 0 0 0 0 0 0 0
|
|
30 0 0 0 0 0 0 0
|
|
31 0 0 0 0 0 0 0
|
|
32 0 0 0 0 0 0 0
|
|
33 0 0 0 0 0 0 0
|
|
34 0 0 0 0 0 0 0
|
|
35 0 0 0 0 0 0 0
|
|
36 0 0 0 0 0 0 0
|
|
37 0 0 0 0 0 0 0
|
|
38 0 0 0 0 0 0 0
|
|
39 0 0 0 0 0 0 0
|
|
3A 0 0 0 0 0 0 0
|
|
3B 0 0 0 0 0 0 0
|
|
3C 0 0 0 0 0 0 0
|
|
3D 0 0 0 0 0 0 0
|
|
3E 0 0 0 0 0 0 0
|
|
3F 0 0 0 0 0 0 0
|
|
*********************************************
|
|
Ltssm tracer host 0 port6 next wr addr: 0.
|
|
HostBridge 0, Pcie Port 6 Init Failed!
|
|
HostBridge 0, Pcie Port 7 link up 1
|
|
IsPcieDeviceLinkWidthSame - 409 Max link width: 0x1 Nego link width: 0x1!
|
|
HostBridge 0, Pcie Port 7 already link up ok , do not link again!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 1, Port 2 link up failed
|
|
Ltssm tracer host 1 port2 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 1 port2 next wr addr: 8000.
|
|
HostBridge 1, Pcie Port 2 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 1, Port 2 link up failed
|
|
Ltssm tracer host 1 port2 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 1 port2 next wr addr: 8000.
|
|
HostBridge 1, Pcie Port 2 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 1, Port 4 link up failed
|
|
Ltssm tracer host 1 port4 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 1 port4 next wr addr: 8000.
|
|
HostBridge 1, Pcie Port 4 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 1, Port 4 link up failed
|
|
Ltssm tracer host 1 port4 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 1 port4 next wr addr: 8000.
|
|
HostBridge 1, Pcie Port 4 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 1, Port 5 link up failed
|
|
Ltssm tracer host 1 port5 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0
|
|
2A 0 1 0 0 0 C 1
|
|
2B 0 1 0 0 0 0 0
|
|
2C 0 1 0 0 0 C 1
|
|
2D 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 1 port5 next wr addr: 8000.
|
|
HostBridge 1, Pcie Port 5 Init Failed!
|
|
pcs locked timeout!
|
|
Check lane num Timeout !
|
|
HostBridge 1, Port 5 link up failed
|
|
Ltssm tracer host 1 port5 next wr addr: 0.
|
|
*********************************************
|
|
bit 31-16 15 14 13-12 11-10 9-6 5-0
|
|
00 0 1 0 0 0 C 1
|
|
01 0 1 0 0 0 0 0
|
|
02 0 1 0 0 0 C 1
|
|
03 0 1 0 0 0 0 0
|
|
04 0 1 0 0 0 C 1
|
|
05 0 1 0 0 0 0 0
|
|
06 0 1 0 0 0 C 1
|
|
07 0 1 0 0 0 0 0
|
|
08 0 1 0 0 0 C 1
|
|
09 0 1 0 0 0 0 0
|
|
0A 0 1 0 0 0 C 1
|
|
0B 0 1 0 0 0 0 0
|
|
0C 0 1 0 0 0 C 1
|
|
0D 0 1 0 0 0 0 0
|
|
0E 0 1 0 0 0 C 1
|
|
0F 0 1 0 0 0 0 0
|
|
10 0 1 0 0 0 C 1
|
|
11 0 1 0 0 0 0 0
|
|
12 0 1 0 0 0 C 1
|
|
13 0 1 0 0 0 0 0
|
|
14 0 1 0 0 0 C 1
|
|
15 0 1 0 0 0 0 0
|
|
16 0 1 0 0 0 C 1
|
|
17 0 1 0 0 0 0 0
|
|
18 0 1 0 0 0 C 1
|
|
19 0 1 0 0 0 0 0
|
|
1A 0 1 0 0 0 C 1
|
|
1B 0 1 0 0 0 0 0
|
|
1C 0 1 0 0 0 C 1
|
|
1D 0 1 0 0 0 0 0
|
|
1E 0 1 0 0 0 C 1
|
|
1F 0 1 0 0 0 0 0
|
|
20 0 1 0 0 0 C 1
|
|
21 0 1 0 0 0 0 0
|
|
22 0 1 0 0 0 C 1
|
|
23 0 1 0 0 0 0 0
|
|
24 0 1 0 0 0 C 1
|
|
25 0 1 0 0 0 0 0
|
|
26 0 1 0 0 0 C 1
|
|
27 0 1 0 0 0 0 0
|
|
28 0 1 0 0 0 C 1
|
|
29 0 1 0 0 0 0 0 1 0 0 0 0 0
|
|
2E 0 1 0 0 0 C 1
|
|
2F 0 1 0 0 0 0 0
|
|
30 0 1 0 0 0 C 1
|
|
31 0 1 0 0 0 0 0
|
|
32 0 1 0 0 0 C 1
|
|
33 0 1 0 0 0 0 0
|
|
34 0 1 0 0 0 C 1
|
|
35 0 1 0 0 0 0 0
|
|
36 0 1 0 0 0 C 1
|
|
37 0 1 0 0 0 0 0
|
|
38 0 1 0 0 0 C 1
|
|
39 0 1 0 0 0 0 0
|
|
3A 0 1 0 0 0 C 1
|
|
3B 0 1 0 0 0 0 0
|
|
3C 0 1 0 0 0 C 1
|
|
3D 0 1 0 0 0 0 0
|
|
3E 0 1 0 0 0 C 1
|
|
3F 0 1 0 0 0 0 0
|
|
LtssmDfxTrace *** Value: 0x8000
|
|
*********************************************
|
|
Ltssm tracer host 1 port5 next wr addr: 8000.
|
|
HostBridge 1, Pcie Port 5 Init Failed!
|
|
PCIE HostBridge 0, Port 0 Disabled, So Get The Default Value!
|
|
PCIE HostBridge 0, Port 1 Disabled, So Get The Default Value!
|
|
PCIE HostBridge 0, Port 3 Disabled, So Get The Default Value!
|
|
PCIE HostBridge 1, Port 0 Disabled, So Get The Default Value!
|
|
PCIE HostBridge 1, Port 1 Disabled, So Get The Default Value!
|
|
PCIE HostBridge 1, Port 3 Disabled, So Get The Default Value!
|
|
PCIE HostBridge 1, Port 6 Disabled, So Get The Default Value!
|
|
PCIE HostBridge 1, Port 7 Disabled, So Get The Default Value!
|
|
Loading driver at 0x000396F3000 EntryPoint=0x000396F3280 PciPlatform.efi
|
|
Loading driver at 0x00039634000 EntryPoint=0x00039634280 DisplayEngine.efi
|
|
Loading driver at 0x0003962D000 EntryPoint=0x0003962D280 ConPlatformDxe.efi
|
|
Loading driver at 0x00039621000 EntryPoint=0x00039621280 ConSplitterDxe.efi
|
|
Loading driver at 0x00039617000 EntryPoint=0x00039617280 GraphicsConsoleDxe.efi
|
|
Loading driver at 0x0003960B000 EntryPoint=0x0003960B280 TerminalDxe.efi
|
|
Loading driver at 0x00039605000 EntryPoint=0x00039605280 ramdisk.efi
|
|
ramdisk:blckio install. Status=Success
|
|
Loading driver at 0x000315FC000 EntryPoint=0x000315FC280 DiskIoDxe.efi
|
|
Loading driver at 0x000315F2000 EntryPoint=0x000315F2280 PartitionDxe.efi
|
|
Loading driver at 0x000315EB000 EntryPoint=0x000315EB2A8 Fat.efi
|
|
Loading driver at 0x000315E6000 EntryPoint=0x000315E6280 EnglishDxe.efi
|
|
Loading driver at 0x000315DE000 EntryPoint=0x000315DE280 VirtualEhciPciIo.efi
|
|
mUsbMemBase: 0xA7020000
|
|
Loading driver at 0x000315D0000 EntryPoint=0x000315D0280 EhciDxe.efi
|
|
Loading driver at 0x000315C3000 EntryPoint=0x000315C3280 NativeOhci.efi
|
|
Loading driver at 0x000315B4000 EntryPoint=0x000315B4280 UsbBusDxe.efi
|
|
Loading driver at 0x000315A9000 EntryPoint=0x000315A9280 UsbKbDxe.efi
|
|
Loading driver at 0x000315A1000 EntryPoint=0x000315A1280 UsbMouseDxe.efi
|
|
Loading driver at 0x00031596000 EntryPoint=0x00031596280 UsbMassStorageDxe.efi
|
|
Loading driver at 0x00031585000 EntryPoint=0x00031585280 SnpPV600Dxe.efi
|
|
[gmac_initialize]:[3841L] GpriData=0x3E2B7018
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
pPriv->ulMacSpeed:9
|
|
pPriv->ulMacDuplex:1
|
|
pPriv->ulPort:0
|
|
pPriv->ulGEBase:0xC7040000
|
|
pPriv->ulPpeCommonBase:0xC5070000
|
|
pPriv->ulPpeTNLBase:0xC5000000
|
|
pPriv->ulRCBCommonBase:0xC5080000
|
|
pPriv->ulRCBCommonEntryBase:0xC5080000
|
|
pPriv->ulRCBSramEntryBase:0xC5090000
|
|
pPriv->ulRingNum:0
|
|
pPriv->ulRingAddr:0
|
|
pPriv->ulMacAddr:0x0 0x18 0x85 0x0 0x0 0xE0
|
|
DSAF_init
|
|
tbl_tcam_data
|
|
0x3EDBAC80:0x00188500 0x00E00000 0x00000000 0x00000001
|
|
0x3EDBAC90:0x00000000
|
|
tbl_tcam_ucast
|
|
0x3EDBAC88:0x00000000 0x00000001 0x00000000 0x00000001
|
|
0x3EDBAC98:0x0000007F 0x00000000 0x0000007F 0x00000000
|
|
0x3EDBACA8:0x00000000
|
|
----ok
|
|
LocateProtocol gHisiBoardXgeStatusProtocolGuid success.
|
|
RXRING = 0x3E2AF000
|
|
TXRING = 0x3E2A8000
|
|
pPriv->ulTxMask = 512
|
|
RXBUFF = 0x3E01E000
|
|
TXBUFF = 0x3DE1D000
|
|
Loading driver at 0x00031574000 EntryPoint=0x00031574280 SnpPV600Dxe.efi
|
|
[gmac_initialize]:[3841L] GpriData=0x3E2A2018
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
pPriv->ulMacSpeed:9
|
|
pPriv->ulMacDuplex:1
|
|
pPriv->ulPort:1
|
|
pPriv->ulGEBase:0xC7044000
|
|
pPriv->ulPpeCommonBase:0xC5070000
|
|
pPriv->ulPpeTNLBase:0xC5010000
|
|
pPriv->ulRCBCommonBase:0xC5080000
|
|
pPriv->ulRCBCommonEntryBase:0xC5080000
|
|
pPriv->ulRCBSramEntryBase:0xC5090000
|
|
pPriv->ulRingNum:16
|
|
pPriv->ulRingAddr:1048576
|
|
pPriv->ulMacAddr:0x0 0x18 0x85 0x1 0x0 0xE0
|
|
DSAF_init
|
|
tbl_tcam_data
|
|
0x3EDBAC80:0x00188501 0x00E00001 0x00000000 0x00000001
|
|
0x3EDBAC90:0x00000000
|
|
tbl_tcam_ucast
|
|
0x3EDBAC88:0x00000000 0x00000001 0x00000000 0x00000001
|
|
0x3EDBAC98:0x0000008F 0x00000000 0x0000008F 0x00000000
|
|
0x3EDBACA8:0x00000000
|
|
----ok
|
|
LocateProtocol gHisiBoardXgeStatusProtocolGuid success.
|
|
RXRING = 0x3DD97000
|
|
TXRING = 0x3DD92000
|
|
pPriv->ulTxMask = 512
|
|
RXBUFF = 0x3DB91000
|
|
TXBUFF = 0x3D98F000
|
|
Loading driver at 0x00031563000 EntryPoint=0x00031563280 SnpPV600Dxe.efi
|
|
[gmac_initialize]:[3841L] GpriData=0x3D907018
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
pPriv->ulMacSpeed:8
|
|
pPriv->ulMacDuplex:1
|
|
pPriv->ulPort:4
|
|
pPriv->ulGEBase:0xC7050000
|
|
pPriv->ulPpeCommonBase:0xC5070000
|
|
pPriv->ulPpeTNLBase:0xC5040000
|
|
pPriv->ulRCBCommonBase:0xC5080000
|
|
pPriv->ulRCBCommonEntryBase:0xC5080000
|
|
pPriv->ulRCBSramEntryBase:0xC5090000
|
|
pPriv->ulRingNum:64
|
|
pPriv->ulRingAddr:4194304
|
|
pPriv->ulMacAddr:0x0 0x18 0x85 0x4 0x0 0xE0
|
|
PhyID : 0x1410DD0
|
|
PhyAddr: 0x0
|
|
ETH_PhyInit 2001; Marvell 88E1512 detect!
|
|
MII_CTRL_REG = 0x3100
|
|
MII_STAT_REG = 0x7949
|
|
page 18, reg20:0x1
|
|
page 0, reg17:0x4000
|
|
Phy Init OK
|
|
DSAF_init
|
|
tbl_tcam_data
|
|
0x3EDBAC80:0x00188504 0x00E00004 0x00000000 0x00000001
|
|
0x3EDBAC90:0x00000000
|
|
tbl_tcam_ucast
|
|
0x3EDBAC88:0x00000000 0x00000001 0x00000000 0x00000001
|
|
0x3EDBAC98:0x000000BF 0x00000000 0x000000BF 0xC1E00000
|
|
0x3EDBACA8:0x00000000
|
|
----ok
|
|
RXRING = 0x3D902000
|
|
TXRING = 0x3D8FD000
|
|
pPriv->ulTxMask = 512
|
|
RXBUFF = 0x3D6FC000
|
|
TXBUFF = 0x3D4FA000
|
|
Loading driver at 0x00031552000 EntryPoint=0x00031552280 SnpPV600Dxe.efi
|
|
[gmac_initialize]:[3841L] GpriData=0x3D4F4018
|
|
[OemGetMac2P]:[515L] Get mac , So using MAC from g_2pserveraddr !
|
|
pPriv->ulMacSpeed:8
|
|
pPriv->ulMacDuplex:1
|
|
pPriv->ulPort:5
|
|
pPriv->ulGEBase:0xC7054000
|
|
pPriv->ulPpeCommonBase:0xC5070000
|
|
pPriv->ulPpeTNLBase:0xC5050000
|
|
pPriv->ulRCBCommonBase:0xC5080000
|
|
pPriv->ulRCBCommonEntryBase:0xC5080000
|
|
pPriv->ulRCBSramEntryBase:0xC5090000
|
|
pPriv->ulRingNum:80
|
|
pPriv->ulRingAddr:5242880
|
|
pPriv->ulMacAddr:0x0 0x18 0x85 0x5 0x0 0xE0
|
|
PhyID : 0x1410DD0
|
|
PhyAddr: 0x1
|
|
ETH_PhyInit 2001; Marvell 88E1512 detect!
|
|
MII_CTRL_REG = 0x3100
|
|
MII_STAT_REG = 0x7949
|
|
page 18, reg20:0x1
|
|
page 0, reg17:0x4040
|
|
Phy Init OK
|
|
DSAF_init
|
|
tbl_tcam_data
|
|
0x3EDBAC80:0x00188505 0x00E00005 0x00000000 0x00000001
|
|
0x3EDBAC90:0x00000000
|
|
tbl_tcam_ucast
|
|
0x3EDBAC88:0x00000000 0x00000001 0x00000000 0x00000001
|
|
0x3EDBAC98:0x000000CF 0x00000000 0x000000CF 0xC1E00000
|
|
0x3EDBACA8:0x00000000
|
|
----ok
|
|
RXRING = 0x3D4EF000
|
|
TXRING = 0x3D4EA000
|
|
pPriv->ulTxMask = 512
|
|
RXBUFF = 0x3D265000
|
|
TXBUFF = 0x3D064000
|
|
Loading driver at 0x00031548000 EntryPoint=0x00031548280 ArpDxe.efi
|
|
Loading driver at 0x00031539000 EntryPoint=0x00031539280 Dhcp4Dxe.efi
|
|
Loading driver at 0x0003151F000 EntryPoint=0x0003151F280 Ip4Dxe.efi
|
|
Loading driver at 0x0003150F000 EntryPoint=0x0003150F280 MnpDxe.efi
|
|
Loading driver at 0x00031501000 EntryPoint=0x00031501280 Mtftp4Dxe.efi
|
|
Loading driver at 0x000314EA000 EntryPoint=0x000314EA280 Tcp4Dxe.efi
|
|
Loading driver at 0x000314DC000 EntryPoint=0x000314DC280 Udp4Dxe.efi
|
|
Loading driver at 0x000314CE000 EntryPoint=0x000314CE280 UefiPxe4BcDxe.efi
|
|
Loading driver at 0x000314C3000 EntryPoint=0x000314C3280 PciHostBridge.efi
|
|
[SetAtuMemRW:725] - Base=A00A0900 value=0
|
|
[SetAtuMemRW:725] - Base=A00A0904 value=0
|
|
[SetAtuMemRW:725] - Base=A00A0908 value=80000000
|
|
[SetAtuMemRW:725] - Base=A00A090C value=B0000000
|
|
[SetAtuMemRW:725] - Base=A00A0910 value=0
|
|
[SetAtuMemRW:725] - Base=A00A0914 value=BE7FFFFF
|
|
[SetAtuMemRW:725] - Base=A00A0918 value=B0000000
|
|
[SetAtuMemRW:725] - Base=A00A091C value=0
|
|
[SetAtuConfig0RW:661] - Base=A00A0900 value=1
|
|
[SetAtuConfig0RW:661] - Base=A00A0904 value=4
|
|
[SetAtuConfig0RW:661] - Base=A00A0908 value=90000000
|
|
[SetAtuConfig0RW:661] - Base=A00A090C value=BE800000
|
|
[SetAtuConfig0RW:661] - Base=A00A0910 value=0
|
|
[SetAtuConfig0RW:661] - Base=A00A0914 value=BE907FFF
|
|
[SetAtuConfig0RW:661] - Base=A00A0918 value=0
|
|
[SetAtuConfig0RW:661] - Base=A00A091C value=0
|
|
[SetAtuConfig1RW:689] - Base=A00A0900 value=2
|
|
[SetAtuConfig1RW:689] - Base=A00A0904 value=5
|
|
[SetAtuConfig1RW:689] - Base=A00A0908 value=90000000
|
|
[SetAtuConfig1RW:689] - Base=A00A090C value=BEA00000
|
|
[SetAtuConfig1RW:689] - Base=A00A0910 value=0
|
|
[SetAtuConfig1RW:689] - Base=A00A0914 value=BEFFFFFF
|
|
[SetAtuConfig1RW:689] - Base=A00A0918 value=0
|
|
[SetAtuConfig1RW:689] - Base=A00A091C value=0
|
|
[SetAtuIoRW:707] - Base=A00A0900 value=3
|
|
[SetAtuIoRW:707] - Base=A00A0904 value=2
|
|
[SetAtuIoRW:707] - Base=A00A0908 value=80000000
|
|
[SetAtuIoRW:707] - Base=A00A090C value=BFFF0000
|
|
[SetAtuIoRW:707] - Base=A00A0910 value=0
|
|
[SetAtuIoRW:707] - Base=A00A0914 value=BFFFFFFF
|
|
[SetAtuIoRW:707] - Base=A00A0918 value=0
|
|
[SetAtuIoRW:707] - Base=A00A091C value=0
|
|
[SetAtuMemRW:725] - Base=700090900 value=0
|
|
[SetAtuMemRW:725] - Base=700090904 value=0
|
|
[SetAtuMemRW:725] - Base=700090908 value=80000000
|
|
[SetAtuMemRW:725] - Base=70009090C value=C5000000
|
|
[SetAtuMemRW:725] - Base=700090910 value=7
|
|
[SetAtuMemRW:725] - Base=700090914 value=FFFEFFFF
|
|
[SetAtuMemRW:725] - Base=700090918 value=C5000000
|
|
[SetAtuMemRW:725] - Base=70009091C value=0
|
|
[SetAtuConfig0RW:661] - Base=700090900 value=1
|
|
[SetAtuConfig0RW:661] - Base=700090904 value=4
|
|
[SetAtuConfig0RW:661] - Base=700090908 value=90000000
|
|
[SetAtuConfig0RW:661] - Base=70009090C value=C4800000
|
|
[SetAtuConfig0RW:661] - Base=700090910 value=7
|
|
[SetAtuConfig0RW:661] - Base=700090914 value=C4907FFF
|
|
[SetAtuConfig0RW:661] - Base=700090918 value=0
|
|
[SetAtuConfig0RW:661] - Base=70009091C value=0
|
|
[SetAtuConfig1RW:689] - Base=700090900 value=2
|
|
[SetAtuConfig1RW:689] - Base=700090904 value=5
|
|
[SetAtuConfig1RW:689] - Base=700090908 value=90000000
|
|
[SetAtuConfig1RW:689] - Base=70009090C value=C4A00000
|
|
[SetAtuConfig1RW:689] - Base=700090910 value=7
|
|
[SetAtuConfig1RW:689] - Base=700090914 value=C4FFFFFF
|
|
[SetAtuConfig1RW:689] - Base=700090918 value=0
|
|
[SetAtuConfig1RW:689] - Base=70009091C value=0
|
|
[SetAtuIoRW:707] - Base=700090900 value=3
|
|
[SetAtuIoRW:707] - Base=700090904 value=2
|
|
[SetAtuIoRW:707] - Base=700090908 value=80000000
|
|
[SetAtuIoRW:707] - Base=70009090C value=FFFF0000
|
|
[SetAtuIoRW:707] - Base=700090910 value=7
|
|
[SetAtuIoRW:707] - Base=700090914 value=FFFFFFFF
|
|
[SetAtuIoRW:707] - Base=700090918 value=0
|
|
[SetAtuIoRW:707] - Base=70009091C value=0
|
|
[SetAtuMemRW:725] - Base=700200900 value=0
|
|
[SetAtuMemRW:725] - Base=700200904 value=0
|
|
[SetAtuMemRW:725] - Base=700200908 value=80000000
|
|
[SetAtuMemRW:725] - Base=70020090C value=40000000
|
|
[SetAtuMemRW:725] - Base=700200910 value=4
|
|
[SetAtuMemRW:725] - Base=700200914 value=FFFFFFFF
|
|
[SetAtuMemRW:725] - Base=700200918 value=40000000
|
|
[SetAtuMemRW:725] - Base=70020091C value=0
|
|
[SetAtuConfig0RW:661] - Base=700200900 value=1
|
|
[SetAtuConfig0RW:661] - Base=700200904 value=4
|
|
[SetAtuConfig0RW:661] - Base=700200908 value=90000000
|
|
[SetAtuConfig0RW:661] - Base=70020090C value=0
|
|
[SetAtuConfig0RW:661] - Base=700200910 value=4
|
|
[SetAtuConfig0RW:661] - Base=700200914 value=107FFF
|
|
[SetAtuConfig0RW:661] - Base=700200918 value=0
|
|
[SetAtuConfig0RW:661] - Base=70020091C value=0
|
|
[SetAtuConfig1RW:689] - Base=700200900 value=2
|
|
[SetAtuConfig1RW:689] - Base=700200904 value=5
|
|
[SetAtuConfig1RW:689] - Base=700200908 value=90000000
|
|
[SetAtuConfig1RW:689] - Base=70020090C value=200000
|
|
[SetAtuConfig1RW:689] - Base=700200910 value=4
|
|
[SetAtuConfig1RW:689] - Base=700200914 value=7FFFFF
|
|
[SetAtuConfig1RW:689] - Base=700200918 value=0
|
|
[SetAtuConfig1RW:689] - Base=70020091C value=0
|
|
[SetAtuIoRW:707] - Base=700200900 value=3
|
|
[SetAtuIoRW:707] - Base=700200904 value=2
|
|
[SetAtuIoRW:707] - Base=700200908 value=80000000
|
|
[SetAtuIoRW:707] - Base=70020090C value=FFFF0000
|
|
[SetAtuIoRW:707] - Base=700200910 value=6
|
|
[SetAtuIoRW:707] - Base=700200914 value=FFFFFFFF
|
|
[SetAtuIoRW:707] - Base=700200918 value=0
|
|
[SetAtuIoRW:707] - Base=70020091C value=0
|
|
[SetAtuMemRW:725] - Base=7000A0900 value=0
|
|
[SetAtuMemRW:725] - Base=7000A0904 value=0
|
|
[SetAtuMemRW:725] - Base=7000A0908 value=80000000
|
|
[SetAtuMemRW:725] - Base=7000A090C value=41000000
|
|
[SetAtuMemRW:725] - Base=7000A0910 value=7
|
|
[SetAtuMemRW:725] - Base=7000A0914 value=7FFEFFFF
|
|
[SetAtuMemRW:725] - Base=7000A0918 value=41000000
|
|
[SetAtuMemRW:725] - Base=7000A091C value=0
|
|
[SetAtuConfig0RW:661] - Base=7000A0900 value=1
|
|
[SetAtuConfig0RW:661] - Base=7000A0904 value=4
|
|
[SetAtuConfig0RW:661] - Base=7000A0908 value=90000000
|
|
[SetAtuConfig0RW:661] - Base=7000A090C value=40800000
|
|
[SetAtuConfig0RW:661] - Base=7000A0910 value=7
|
|
[SetAtuConfig0RW:661] - Base=7000A0914 value=40907FFF
|
|
[SetAtuConfig0RW:661] - Base=7000A0918 value=0
|
|
[SetAtuConfig0RW:661] - Base=7000A091C value=0
|
|
[SetAtuConfig1RW:689] - Base=7000A0900 value=2
|
|
[SetAtuConfig1RW:689] - Base=7000A0904 value=5
|
|
[SetAtuConfig1RW:689] - Base=7000A0908 value=90000000
|
|
[SetAtuConfig1RW:689] - Base=7000A090C value=40A00000
|
|
[SetAtuConfig1RW:689] - Base=7000A0910 value=7
|
|
[SetAtuConfig1RW:689] - Base=7000A0914 value=40FFFFFF
|
|
[SetAtuConfig1RW:689] - Base=7000A0918 value=0
|
|
[SetAtuConfig1RW:689] - Base=7000A091C value=0
|
|
[SetAtuIoRW:707] - Base=7000A0900 value=3
|
|
[SetAtuIoRW:707] - Base=7000A0904 value=2
|
|
[SetAtuIoRW:707] - Base=7000A0908 value=80000000
|
|
[SetAtuIoRW:707] - Base=7000A090C value=7FFF0000
|
|
[SetAtuIoRW:707] - Base=7000A0910 value=7
|
|
[SetAtuIoRW:707] - Base=7000A0914 value=7FFFFFFF
|
|
[SetAtuIoRW:707] - Base=7000A0918 value=0
|
|
[SetAtuIoRW:707] - Base=7000A091C value=0
|
|
[SetAtuMemRW:725] - Base=7000B0900 value=0
|
|
[SetAtuMemRW:725] - Base=7000B0904 value=0
|
|
[SetAtuMemRW:725] - Base=7000B0908 value=80000000
|
|
[SetAtuMemRW:725] - Base=7000B090C value=84800000
|
|
[SetAtuMemRW:725] - Base=7000B0910 value=7
|
|
[SetAtuMemRW:725] - Base=7000B0914 value=BFFEFFFF
|
|
[SetAtuMemRW:725] - Base=7000B0918 value=84800000
|
|
[SetAtuMemRW:725] - Base=7000B091C value=0
|
|
[SetAtuConfig0RW:661] - Base=7000B0900 value=1
|
|
[SetAtuConfig0RW:661] - Base=7000B0904 value=4
|
|
[SetAtuConfig0RW:661] - Base=7000B0908 value=90000000
|
|
[SetAtuConfig0RW:661] - Base=7000B090C value=84000000
|
|
[SetAtuConfig0RW:661] - Base=7000B0910 value=7
|
|
[SetAtuConfig0RW:661] - Base=7000B0914 value=84107FFF
|
|
[SetAtuConfig0RW:661] - Base=7000B0918 value=0
|
|
[SetAtuConfig0RW:661] - Base=7000B091C value=0
|
|
[SetAtuConfig1RW:689] - Base=7000B0900 value=2
|
|
[SetAtuConfig1RW:689] - Base=7000B0904 value=5
|
|
[SetAtuConfig1RW:689] - Base=7000B0908 value=90000000
|
|
[SetAtuConfig1RW:689] - Base=7000B090C value=84200000
|
|
[SetAtuConfig1RW:689] - Base=7000B0910 value=7
|
|
[SetAtuConfig1RW:689] - Base=7000B0914 value=847FFFFF
|
|
[SetAtuConfig1RW:689] - Base=7000B0918 value=0
|
|
[SetAtuConfig1RW:689] - Base=7000B091C value=0
|
|
[SetAtuIoRW:707] - Base=7000B0900 value=3
|
|
[SetAtuIoRW:707] - Base=7000B0904 value=2
|
|
[SetAtuIoRW:707] - Base=7000B0908 value=80000000
|
|
[SetAtuIoRW:707] - Base=7000B090C value=BFFF0000
|
|
[SetAtuIoRW:707] - Base=7000B0910 value=7
|
|
[SetAtuIoRW:707] - Base=70] - Base=600A00A0900 value=0
|
|
[SetAtuMemRW:725] - Base=600A00A0904 value=0
|
|
[SetAtuMemRW:725] - Base=600A00A0908 value=80000000
|
|
[SetAtuMemRW:725] - Base=600A00A090C value=40000000
|
|
[SetAtuMemRW:725] - Base=600A00A0910 value=650
|
|
[SetAtuMemRW:725] - Base=600A00A0914 value=FFFFFFFF
|
|
[SetAtuMemRW:725] - Base=600A00A0918 value=40000000
|
|
[SetAtuMemRW:725] - Base=600A00A091C value=0
|
|
[SetAtuConfig0RW:661] - Base=600A00A0900 value=1
|
|
[SetAtuConfig0RW:661] - Base=600A00A0904 value=4
|
|
[SetAtuConfig0RW:661] - Base=600A00A0908 value=90000000
|
|
[SetAtuConfig0RW:661] - Base=600A00A090C value=1000000
|
|
[SetAtuConfig0RW:661] - Base=600A00A0910 value=640
|
|
[SetAtuConfig0RW:661] - Base=600A00A0914 value=1107FFF
|
|
[SetAtuConfig0RW:661] - Base=600A00A0918 value=0
|
|
[SetAtuConfig0RW:661] - Base=600A00A091C value=0
|
|
[SetAtuConfig1RW:689] - Base=600A00A0900 value=2
|
|
[SetAtuConfig1RW:689] - Base=600A00A0904 value=5
|
|
[SetAtuConfig1RW:689] - Base=600A00A0908 value=90000000
|
|
[SetAtuConfig1RW:689] - Base=600A00A090C value=1200000
|
|
[SetAtuConfig1RW:689] - Base=600A00A0910 value=640
|
|
[SetAtuConfig1RW:689] - Base=600A00A0914 value=1FFFFFF
|
|
[SetAtuConfig1RW:689] - Base=600A00A0918 value=0
|
|
[SetAtuConfig1RW:689] - Base=600A00A091C value=0
|
|
[SetAtuIoRW:707] - Base=600A00A0900 value=3
|
|
[SetAtuIoRW:707] - Base=600A00A0904 value=2
|
|
[SetAtuIoRW:707] - Base=600A00A0908 value=80000000
|
|
[SetAtuIoRW:707] - Base=600A00A090C value=FFFF0000
|
|
[SetAtuIoRW:707] - Base=600A00A0910 value=67F
|
|
[SetAtuIoRW:707] - Base=600A00A0914 value=FFFFFFFF
|
|
[SetAtuIoRW:707] - Base=600A00A0918 value=0
|
|
[SetAtuIoRW:707] - Base=600A00A091C value=0
|
|
[SetAtuMemRW:725] - Base=700A0090900 value=0
|
|
[SetAtuMemRW:725] - Base=700A0090904 value=0
|
|
[SetAtuMemRW:725] - Base=700A0090908 value=80000000
|
|
[SetAtuMemRW:725] - Base=700A009090C value=40000000
|
|
[SetAtuMemRW:725] - Base=700A0090910 value=750
|
|
[SetAtuMemRW:725] - Base=700A0090914 value=FFFFFFFF
|
|
[SetAtuMemRW:725] - Base=700A0090918 value=40000000
|
|
[SetAtuMemRW:725] - Base=700A009091C value=0
|
|
[SetAtuConfig0RW:661] - Base=700A0090900 value=1
|
|
[SetAtuConfig0RW:661] - Base=700A0090904 value=4
|
|
[SetAtuConfig0RW:661] - Base=700A0090908 value=90000000
|
|
[SetAtuConfig0RW:661] - Base=700A009090C value=2000000
|
|
[SetAtuConfig0RW:661] - Base=700A0090910 value=740
|
|
[SetAtuConfig0RW:661] - Base=700A0090914 value=2107FFF
|
|
[SetAtuConfig0RW:661] - Base=700A0090918 value=0
|
|
[SetAtuConfig0RW:661] - Base=700A009091C value=0
|
|
[SetAtuConfig1RW:689] - Base=700A0090900 value=2
|
|
[SetAtuConfig1RW:689] - Base=700A0090904 value=5
|
|
[SetAtuConfig1RW:689] - Base=700A0090908 value=90000000
|
|
[SetAtuConfig1RW:689] - Base=700A009090C value=2200000
|
|
[SetAtuConfig1RW:689] - Base=700A0090910 value=740
|
|
[SetAtuConfig1RW:689] - Base=700A0090914 value=2FFFFFF
|
|
[SetAtuConfig1RW:689] - Base=700A0090918 value=0
|
|
[SetAtuConfig1RW:689] - Base=700A009091C value=0
|
|
[SetAtuIoRW:707] - Base=700A0090900 value=3
|
|
[SetAtuIoRW:707] - Base=700A0090904 value=2
|
|
[SetAtuIoRW:707] - Base=700A0090908 value=80000000
|
|
[SetAtuIoRW:707] - Base=700A009090C value=FFFF0000
|
|
[SetAtuIoRW:707] - Base=700A0090910 value=77F
|
|
[SetAtuIoRW:707] - Base=700A0090914 value=FFFFFFFF
|
|
[SetAtuIoRW:707] - Base=700A0090918 value=0
|
|
[SetAtuIoRW:707] - Base=700A009091C value=0
|
|
[SetAtuMemRW:725] - Base=700A0200900 value=0
|
|
[SetAtuMemRW:725] - Base=700A0200904 value=0
|
|
[SetAtuMemRW:725] - Base=700A0200908 value=80000000
|
|
[SetAtuMemRW:725] - Base=700A020090C value=40000000
|
|
[SetAtuMemRW:725] - Base=700A0200910 value=790
|
|
[SetAtuMemRW:725] - Base=700A0200914 value=FFFFFFFF
|
|
[SetAtuMemRW:725] - Base=700A0200918 value=40000000
|
|
[SetAtuMemRW:725] - Base=700A020091C value=0
|
|
[SetAtuConfig0RW:661] - Base=700A0200900 value=1
|
|
[SetAtuConfig0RW:661] - Base=700A0200904 value=4
|
|
[SetAtuConfig0RW:661] - Base=700A0200908 value=90000000
|
|
[SetAtuConfig0RW:661] - Base=700A020090C value=3000000
|
|
[SetAtuConfig0RW:661] - Base=700A0200910 value=780
|
|
[SetAtuConfig0RW:661] - Base=700A0200914 value=3107FFF
|
|
[SetAtuConfig0RW:661] - Base=700A0200918 value=0
|
|
[SetAtuConfig0RW:661] - Base=700A020091C value=0
|
|
[SetAtuConfig1RW:689] - Base=700A0200900 value=2
|
|
[SetAtuConfig1RW:689] - Base=700A0200904 value=5
|
|
[SetAtuConfig1RW:689] - Base=700A0200908 value=90000000
|
|
[SetAtuConfig1RW:689] - Base=700A020090C value=3200000
|
|
[SetAtuConfig1RW:689] - Base=700A0200910 value=780
|
|
[SetAtuConfig1RW:689] - Base=700A0200914 value=3FFFFFF
|
|
[SetAtuConfig1RW:689] - Base=700A0200918 value=0
|
|
[SetAtuConfig1RW:689] - Base=700A020091C value=0
|
|
[SetAtuIoRW:707] - Base=700A0200900 value=3
|
|
[SetAtuIoRW:707] - Base=700A0200904 value=2
|
|
[SetAtuIoRW:707] - Base=700A0200908 value=80000000
|
|
[SetAtuIoRW:707] - Base=700A020090C value=FFFF0000
|
|
[SetAtuIoRW:707] - Base=700A0200910 value=7BF
|
|
[SetAtuIoRW:707] - Base=700A0200914 value=FFFFFFFF
|
|
[SetAtuIoRW:707] - Base=700A0200918 value=0
|
|
[SetAtuIoRW:707] - Base=700A020091C value=0
|
|
Loading driver at 0x000314AA000 EntryPoint=0x000314AA280 PciBusDxe.efi
|
|
Loading driver at 0x0003149C000 EntryPoint=0x0003149C280 NvmExpressDxe.efi
|
|
Loading driver at 0x00031478000 EntryPoint=0x00031478280 XGigUndiDxe.efi
|
|
Loading driver at 0x0003146E000 EntryPoint=0x0003146E280 SmiGraphicsOutput.efi
|
|
Loading driver at 0x00031431000 EntryPoint=0x00031431280 SasDriverDxe.efi
|
|
SasDriverInitialize Ok!!!
|
|
[sas_init,2200]Card:1 init ok
|
|
[Higgs_StartPhy,184]Card:1 no cable on phy:0, default as electric cable
|
|
[Higgs_StartPhy,184]Card:1 no cable on phy:1, default as electric cable
|
|
[Higgs_StartPhy,184]Card:1 no cable on phy:2, default as electric cable
|
|
[Higgs_StartPhy,184]Card:1 no cable on phy:3, default as electric cable
|
|
[Higgs_StartPhy,184]Card:1 no cable on phy:4, default as electric cable
|
|
InitUndiDriverSupported Check devID 0x0, EhcExecTransfer: transfer with result 2
|
|
EhcControlTransfer: transfer - 2
|
|
EhcExecTransfer: transfer with result 2
|
|
EhcControlTransfer: transfer - 2
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
SasDriverSupported(491): Error!
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
InitUndiDriverSupported Check devID 0x1610, SmiControllerDriverSupported - Status:Unsupported
|
|
Loading Linux 5.12.2-1.g6fcec30-default ...
|
|
Loading initial ramdisk ...
|
|
CoreGetMemoryMap: MapKey(3EDBA740) = 2A83, mMemoryMapKey(3EDE4B98) = 2A83.
|
|
CoreGetMemoryMap: MapKey(3EDBA760) = 2A83, mMemoryMapKey(3EDE4B98) = 2A83.
|
|
Loading driver at 0x0002B570000 EntryPoint=0x0002CE848E8
|
|
Loading driver at 0x0002B570000 EntryPoint=0x0002CE848E8
|
|
EFI stub: Booting Linux Kernel...
|
|
EFI stub: EFI_RNG_PROTOCOL unavailable
|
|
EFI stub: Using DTB from configuration table
|
|
CoreGetMemoryMap: MapKey(3EDBA6D8) = 2A96, mMemoryMapKey(3EDE4B98) = 2A96.
|
|
CoreGetMemoryMap: MapKey(3EDBA6D8) = 2A97, mMemoryMapKey(3EDE4B98) = 2A97.
|
|
EFI stub: Exiting boot services and installing virtual address map...
|
|
CoreGetMemoryMap: MapKey(3EDBA6D8) = 2A9E, mMemoryMapKey(3EDE4B98) = 2A9E.
|
|
CoreGetMemoryMap: MapKey(3EDBA6D8) = 2A9F, mMemoryMapKey(3EDE4B98) = 2A9F.
|
|
CoreGetMemoryMap: MapKey(3EDBA698) = 2A9F, mMemoryMapKey(3EDE4B98) = 2A9F.
|
|
CoreGetMemoryMap: MapKey(3EDBA698) = 2AA0, mMemoryMapKey(3EDE4B98) = 2AA0.
|
|
[SAL_ClearAffiliationSMP,324]it is going to hard reset dev:0x500E004AAAAAAA1F
|
|
SAS ExitBootServicesEvent
|
|
GMAC ExitBootServicesEvent
|
|
GMAC ExitBootServicesEvent
|
|
OHCI ExitBootServicesEvent
|
|
IPMI ExitBootService Event
|
|
M3 sram flag set.........done!IPMI ExitBootServicesEvent
|
|
stini
|
|
[
|
|
EM c i_c iisableSMMU ExitBootServicesEvent
|
|
sE]ci2s .
|
|
[Me] iuccena.ledMs]cies .
|
|
[MEe sc ccsss.
|
|
MEc c2s .
|
|
[led i2c essbledMsuccens.o
|
|
[eE] tnreolieit0 ucres fnilys
|
|
cMe] cunly
|
|
u[ce] fullyoiei 1 uccefsfuily
|
|
[Mr] ctnrrfliei uccessfnll s
|
|
cMEsscunlr
|
|
uccessfullyllnr 3 uares inlty
|
|
[ME] dimm 0 present
|
|
[ME] dimm 0 present
|
|
SetOSWatchdog CountDown 3000. Status Success
|
|
BIOS Is Over! Bye~
|
|
[ME] dimm 1 present
|
|
[ME] dimm 1 present
|
|
[ME] dimm 2 present
|
|
[ME] dimm 2 present
|
|
[ME] dimm 3 present
|
|
[ME] dimm 3 present
|
|
[ME] dimm 4 present
|
|
[ME] dimm 4 present
|
|
[ME] dimm 5 present
|
|
[ME] dimm 5 present
|
|
[ME] dimm 6 present
|
|
[ME] dimm 6 present
|
|
[ME] dimm 7 present
|
|
[ME] dimm 7 present
|
|
[ 0.000000] Booting Linux on physical CPU 0x0000010000 [0x410fd082]
|
|
[ 0.000000] Linux version 5.12.2-1.g6fcec30-default (geeko@buildhost) (gcc (SUSE Linux) 10.3.0, GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.36.1.20210326-3) #1 SMP Fri May 7 18:05:46 UTC 2021 (6fcec30)
|
|
[ 0.000000] efi: EFI v2.60 by EDK II
|
|
[ 0.000000] efi: SMBIOS=0x3ed50000 SMBIOS 3.0=0x397e0000 ACPI=0x398d0000 ACPI 2.0=0x398d0014 MEMATTR=0x3bbca018 MEMRESERVE=0x39d60e98
|
|
[ 0.000000] ACPI: Early table checksum verification disabled
|
|
[ 0.000000] ACPI: RSDP 0x00000000398D0014 000024 (v02 HISI )
|
|
[ 0.000000] ACPI: XSDT 0x00000000398C00E8 00006C (v01 HISI HIP07 00000000 01000013)
|
|
[ 0.000000] ACPI: FACP 0x0000000039760000 000114 (v06 HISI HIP07 00000000 INTL 20151124)
|
|
[ 0.000000] ACPI: DSDT 0x0000000039720000 00691A (v02 HISI HIP07 00000000 INTL 20170728)
|
|
[ 0.000000] ACPI: MCFG 0x00000000397C0000 0000AC (v01 HISI HIP07 00000000 INTL 20151124)
|
|
[ 0.000000] ACPI: SLIT 0x00000000397B0000 00003C (v01 HISI HIP07 00000000 INTL 20151124)
|
|
[ 0.000000] ACPI: SPCR 0x00000000397A0000 000050 (v02 HISI HIP07 00000000 INTL 20151124)
|
|
[ 0.000000] ACPI: SRAT 0x0000000039790000 000528 (v03 HISI HIP07 00000000 INTL 20151124)
|
|
[ 0.000000] ACPI: DBG2 0x0000000039780000 00005A (v00 HISI HIP07 00000000 INTL 20151124)
|
|
[ 0.000000] ACPI: GTDT 0x0000000039750000 00007C (v02 HISI HIP07 00000000 INTL 20151124)
|
|
[ 0.000000] ACPI: APIC 0x0000000039740000 0014E4 (v04 HISI HIP07 00000000 INTL 20151124)
|
|
[ 0.000000] ACPI: IORT 0x0000000039730000 000554 (v00 HISI HIP07 00000000 INTL 20170728)
|
|
[ 0.000000] ACPI: SPCR: console: pl011,mmio32,0x602b0000,115200
|
|
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
|
|
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x1000000000-0x1fffffffff]
|
|
[ 0.000000] ACPI: SRAT: Node 1 PXM 2 [mem 0x9000000000-0x9fffffffff]
|
|
[ 0.000000] NUMA: NODE_DATA [mem 0x1ffbffb480-0x1ffbffffff]
|
|
[ 0.000000] NUMA: NODE_DATA [mem 0x9febfbf480-0x9febfc3fff]
|
|
[ 0.000000] Zone ranges:
|
|
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
|
|
[ 0.000000] DMA32 empty
|
|
[ 0.000000] Normal [mem 0x0000000100000000-0x0000009ffbffffff]
|
|
[ 0.000000] Device empty
|
|
[ 0.000000] Movable zone start for each node
|
|
[ 0.000000] Early memory node ranges
|
|
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003964ffff]
|
|
[ 0.000000] node 0: [mem 0x0000000039650000-0x00000000396effff]
|
|
[ 0.000000] node 0: [mem 0x00000000396f0000-0x000000003976ffff]
|
|
[ 0.000000] node 0: [mem 0x0000000039770000-0x000000003977ffff]
|
|
[ 0.000000] node 0: [mem 0x0000000039780000-0x00000000397cffff]
|
|
[ 0.000000] node 0: [mem 0x00000000397d0000-0x00000000398bffff]
|
|
[ 0.000000] node 0: [mem 0x00000000398c0000-0x00000000398dffff]
|
|
[ 0.000000] node 0: [mem 0x00000000398e0000-0x0000000039d5ffff]
|
|
[ 0.000000] node 0: [mem 0x0000000039d60000-0x000000003ed4ffff]
|
|
[ 0.000000] node 0: [mem 0x000000003ed50000-0x000000003ed7ffff]
|
|
[ 0.000000] node 0: [mem 0x000000003ed80000-0x000000003fbfffff]
|
|
[ 0.000000] node 0: [mem 0x0000001040000000-0x0000001ffbffffff]
|
|
[ 0.000000] node 1: [mem 0x0000009000000000-0x0000009ffbffffff]
|
|
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000001ffbffffff]
|
|
[ 0.000000] Initmem setup node 1 [mem 0x0000009000000000-0x0000009ffbffffff]
|
|
[ 0.000000] crashkernel reserved: 0x000000001e800000 - 0x0000000028f00000 (167 MB)
|
|
[ 0.000000] psci: probing for conduit method from ACPI.
|
|
[ 0.000000] psci: PSCIv1.0 detected in firmware.
|
|
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
|
|
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
|
|
[ 0.000000] psci: SMC Calling Convention v1.0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10000 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10001 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10002 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10003 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10100 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10101 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10102 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10103 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10200 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10201 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10202 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10203 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10300 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10301 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10302 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10303 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30000 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30001 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30002 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30003 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30100 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30101 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30102 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30103 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30200 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30201 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30202 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30203 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30300 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30301 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30302 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x30303 -> Node 0
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50000 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50001 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50002 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50003 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50100 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50101 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50102 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50103 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50200 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50201 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50202 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50203 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50300 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50301 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50302 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50303 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70000 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70001 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70002 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70003 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70100 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70101 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70102 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70103 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70200 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70201 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70202 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70203 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70300 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70301 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70302 -> Node 1
|
|
[ 0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x70303 -> Node 1
|
|
[ 0.000000] percpu: Embedded 33 pages/cpu s96472 r8192 d30504 u135168
|
|
[ 0.000000] Detected PIPT I-cache on CPU0
|
|
[ 0.000000] CPU features: detected: GIC system register CPU interface
|
|
[ 0.000000] CPU features: detected: Spectre-v3a
|
|
[ 0.000000] CPU features: kernel page table isolation forced OFF by kpti command line option
|
|
[ 0.000000] CPU features: detected: Spectre-v2
|
|
[ 0.000000] CPU features: detected: Spectre-v4
|
|
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
|
|
[ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 32996880
|
|
[ 0.000000] Policy zone: Normal
|
|
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-5.12.2-1.g6fcec30-default root=UUID=3dbaf341-1202-4833-bd3c-146fc3ed8204 console=ttyAMA0,115200 showopts nospec spectre_v2=off pti=off kpti=off mitigations=off default_hugepagesz=1G hugepagesz=1G hugepages=64 crashkernel=167M enforcing=0
|
|
[ 0.000000] printk: log_buf_len individual max cpu contribution: 32768 bytes
|
|
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 2064384 bytes
|
|
[ 0.000000] printk: log_buf_len min size: 262144 bytes
|
|
[ 0.000000] printk: log_buf_len: 4194304 bytes
|
|
[ 0.000000] printk: early log buf free: 252256(96%)
|
|
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
|
|
[ 0.000000] software IO TLB: mapped [mem 0x0000000035650000-0x0000000039650000] (64MB)
|
|
[ 0.000000] Memory: 1015904K/134082560K available (13888K kernel code, 3334K rwdata, 11184K rodata, 6720K init, 1603K bss, 69795100K reserved, 0K cma-reserved)
|
|
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x580 with crng_init=0
|
|
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=2
|
|
[ 0.000000] ftrace: allocating 44482 entries in 174 pages
|
|
[ 0.000000] ftrace: allocated 174 pages with 5 groups
|
|
[ 0.000000] rcu: Hierarchical RCU implementation.
|
|
[ 0.000000] rcu: RCU event tracing is enabled.
|
|
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=480 to nr_cpu_ids=64.
|
|
[ 0.000000] Trampoline variant of Tasks RCU enabled.
|
|
[ 0.000000] Rude variant of Tasks RCU enabled.
|
|
[ 0.000000] Tracing variant of Tasks RCU enabled.
|
|
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
|
|
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64
|
|
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
|
|
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
|
|
[ 0.000000] GIC: enabling workaround for GICv3: HIP07 erratum 161010803
|
|
[ 0.000000] GICv3: 988 SPIs implemented
|
|
[ 0.000000] GICv3: 0 Extended SPIs implemented
|
|
[ 0.000000] GICv3: Distributor has no Range Selector support
|
|
[ 0.000000] GICv3: 16 PPIs implemented
|
|
[ 0.000000] GICv3: GICv4 features: DirectLPI
|
|
[ 0.000000] GICv3: CPU0: found redistributor 10000 region 0:0x000000004d100000
|
|
[ 0.000000] ITS [mem 0x4c000000-0x4c01ffff]
|
|
[ 0.000000] ITS@0x000000004c000000: Using ITS number 0
|
|
[ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802
|
|
[ 0.000000] ITS@0x000000004c000000: allocated 524288 Devices @1040800000 (flat, esz 8, psz 16K, shr 1)
|
|
[ 0.000000] ITS@0x000000004c000000: allocated 65536 Virtual CPUs @1040300000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS@0x000000004c000000: allocated 512 Interrupt Collections @1040293000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS [mem 0x6c000000-0x6c01ffff]
|
|
[ 0.000000] ITS@0x000000006c000000: Using ITS number 1
|
|
[ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802
|
|
[ 0.000000] ITS@0x000000006c000000: allocated 524288 Devices @1040c00000 (flat, esz 8, psz 16K, shr 1)
|
|
[ 0.000000] ITS@0x000000006c000000: allocated 65536 Virtual CPUs @1040380000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS@0x000000006c000000: allocated 512 Interrupt Collections @1040294000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS [mem 0xc6000000-0xc601ffff]
|
|
[ 0.000000] ITS@0x00000000c6000000: Using ITS number 2
|
|
[ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802
|
|
[ 0.000000] ITS@0x00000000c6000000: allocated 524288 Devices @1041000000 (flat, esz 8, psz 16K, shr 1)
|
|
[ 0.000000] ITS@0x00000000c6000000: allocated 65536 Virtual CPUs @1041400000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS@0x00000000c6000000: allocated 512 Interrupt Collections @1040295000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS [mem 0x8c6000000-0x8c601ffff]
|
|
[ 0.000000] ITS@0x00000008c6000000: Using ITS number 3
|
|
[ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802
|
|
[ 0.000000] ITS@0x00000008c6000000: allocated 524288 Devices @1041800000 (flat, esz 8, psz 16K, shr 1)
|
|
[ 0.000000] ITS@0x00000008c6000000: allocated 65536 Virtual CPUs @1041480000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS@0x00000008c6000000: allocated 512 Interrupt Collections @1040296000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS [mem 0x4004c000000-0x4004c01ffff]
|
|
[ 0.000000] ITS@0x000004004c000000: Using ITS number 4
|
|
[ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802
|
|
[ 0.000000] ITS@0x000004004c000000: allocated 524288 Devices @1041c00000 (flat, esz 8, psz 16K, shr 1)
|
|
[ 0.000000] ITS@0x000004004c000000: allocated 65536 Virtual CPUs @1041500000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS@0x000004004c000000: allocated 512 Interrupt Collections @1040297000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS [mem 0x4006c000000-0x4006c01ffff]
|
|
[ 0.000000] ITS@0x000004006c000000: Using ITS number 5
|
|
[ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802
|
|
[ 0.000000] ITS@0x000004006c000000: allocated 524288 Devices @1042000000 (flat, esz 8, psz 16K, shr 1)
|
|
[ 0.000000] ITS@0x000004006c000000: allocated 65536 Virtual CPUs @1041580000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS@0x000004006c000000: allocated 512 Interrupt Collections @1040299000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS [mem 0x400c6000000-0x400c601ffff]
|
|
[ 0.000000] ITS@0x00000400c6000000: Using ITS number 6
|
|
[ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802
|
|
[ 0.000000] ITS@0x00000400c6000000: allocated 524288 Devices @1042400000 (flat, esz 8, psz 16K, shr 1)
|
|
[ 0.000000] ITS@0x00000400c6000000: allocated 65536 Virtual CPUs @1041680000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS@0x00000400c6000000: allocated 512 Interrupt Collections @104029a000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS [mem 0x408c6000000-0x408c601ffff]
|
|
[ 0.000000] ITS@0x00000408c6000000: Using ITS number 7
|
|
[ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802
|
|
[ 0.000000] ITS@0x00000408c6000000: allocated 524288 Devices @1042800000 (flat, esz 8, psz 16K, shr 1)
|
|
[ 0.000000] ITS@0x00000408c6000000: allocated 65536 Virtual CPUs @1041700000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] ITS@0x00000408c6000000: allocated 512 Interrupt Collections @104029b000 (flat, esz 8, psz 4K, shr 1)
|
|
[ 0.000000] GICv3: using LPI property table @0x0000001041620000
|
|
[ 0.000000] ITS: Using DirectLPI for VPE invalidation
|
|
[ 0.000000] ITS: Enabling GICv4 support
|
|
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000001041630000
|
|
[ 0.000000] arch_timer: Enabling global workaround for HiSilicon erratum 161010101
|
|
[ 0.000000] arch_timer: CPU0: Trapping CNTVCT access
|
|
[ 0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys).
|
|
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
|
|
[ 0.000000] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
|
|
[ 0.000101] Console: colour dummy device 80x25
|
|
[ 0.000160] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
|
|
[ 0.000182] ACPI: Core revision 20210105
|
|
[ 0.000306] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
|
|
[ 0.000312] pid_max: default: 65536 minimum: 512
|
|
[ 0.000370] LSM: Security Framework initializing
|
|
[ 0.000416] AppArmor: AppArmor initialized
|
|
[ 0.023193] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
|
|
[ 0.034590] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc)
|
|
[ 0.034988] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
|
|
[ 0.035354] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
|
|
[ 0.035907] ACPI PPTT: No PPTT table found, CPU and cache topology may be inaccurate
|
|
[ 0.036287] rcu: Hierarchical SRCU implementation.
|
|
[ 0.036628] Platform MSI: ITS@0x4c000000 domain created
|
|
[ 0.036633] Platform MSI: ITS@0x6c000000 domain created
|
|
[ 0.036641] Platform MSI: ITS@0xc6000000 domain created
|
|
[ 0.036646] Platform MSI: ITS@0x8c6000000 domain created
|
|
[ 0.036650] Platform MSI: ITS@0x4004c000000 domain created
|
|
[ 0.036654] Platform MSI: ITS@0x4006c000000 domain created
|
|
[ 0.036658] Platform MSI: ITS@0x400c6000000 domain created
|
|
[ 0.036662] Platform MSI: ITS@0x408c6000000 domain created
|
|
[ 0.036673] PCI/MSI: ITS@0x4c000000 domain created
|
|
[ 0.036677] PCI/MSI: ITS@0x6c000000 domain created
|
|
[ 0.036681] PCI/MSI: ITS@0xc6000000 domain created
|
|
[ 0.036685] PCI/MSI: ITS@0x8c6000000 domain created
|
|
[ 0.036688] PCI/MSI: ITS@0x4004c000000 domain created
|
|
[ 0.036692] PCI/MSI: ITS@0x4006c000000 domain created
|
|
[ 0.036697] PCI/MSI: ITS@0x400c6000000 domain created
|
|
[ 0.036701] PCI/MSI: ITS@0x408c6000000 domain created
|
|
[ 0.036708] fsl-mc MSI: ITS@0x4c000000 domain created
|
|
[ 0.036712] fsl-mc MSI: ITS@0x6c000000 domain created
|
|
[ 0.036716] fsl-mc MSI: ITS@0xc6000000 domain created
|
|
[ 0.036720] fsl-mc MSI: ITS@0x8c6000000 domain created
|
|
[ 0.036723] fsl-mc MSI: ITS@0x4004c000000 domain created
|
|
[ 0.036727] fsl-mc MSI: ITS@0x4006c000000 domain created
|
|
[ 0.036731] fsl-mc MSI: ITS@0x400c6000000 domain created
|
|
[ 0.036735] fsl-mc MSI: ITS@0x408c6000000 domain created
|
|
[ 0.036747] Remapping and enabling EFI services.
|
|
[ 0.039112] smp: Bringing up secondary CPUs ...
|
|
[ 0.042005] Detected PIPT I-cache on CPU1
|
|
[ 0.042020] GICv3: CPU1: found redistributor 10001 region 1:0x000000004d140000
|
|
[ 0.042033] GICv3: CPU1: using allocated LPI pending table @0x0000001041640000
|
|
[ 0.042153] arch_timer: CPU1: Trapping CNTVCT access
|
|
[ 0.042160] CPU1: Booted secondary processor 0x0000010001 [0x410fd082]
|
|
[ 0.045060] Detected PIPT I-cache on CPU2
|
|
[ 0.045067] GICv3: CPU2: found redistributor 10002 region 2:0x000000004d180000
|
|
[ 0.045077] GICv3: CPU2: using allocated LPI pending table @0x0000001041650000
|
|
[ 0.045181] arch_timer: CPU2: Trapping CNTVCT access
|
|
[ 0.045186] CPU2: Booted secondary processor 0x0000010002 [0x410fd082]
|
|
[ 0.048066] Detected PIPT I-cache on CPU3
|
|
[ 0.048073] GICv3: CPU3: found redistributor 10003 region 3:0x000000004d1c0000
|
|
[ 0.048083] GICv3: CPU3: using allocated LPI pending table @0x0000001041660000
|
|
[ 0.048187] arch_timer: CPU3: Trapping CNTVCT access
|
|
[ 0.048191] CPU3: Booted secondary processor 0x0000010003 [0x410fd082]
|
|
[ 0.051083] Detected PIPT I-cache on CPU4
|
|
[ 0.051092] GICv3: CPU4: found redistributor 10100 region 4:0x000000004d200000
|
|
[ 0.051104] GICv3: CPU4: using allocated LPI pending table @0x0000001041670000
|
|
[ 0.051209] arch_timer: CPU4: Trapping CNTVCT access
|
|
[ 0.051214] CPU4: Booted secondary processor 0x0000010100 [0x410fd082]
|
|
[ 0.054102] Detected PIPT I-cache on CPU5
|
|
[ 0.054110] GICv3: CPU5: found redistributor 10101 region 5:0x000000004d240000
|
|
[ 0.054120] GICv3: CPU5: using allocated LPI pending table @0x0000001041780000
|
|
[ 0.054225] arch_timer: CPU5: Trapping CNTVCT access
|
|
[ 0.054230] CPU5: Booted secondary processor 0x0000010101 [0x410fd082]
|
|
[ 0.057117] Detected PIPT I-cache on CPU6
|
|
[ 0.057125] GICv3: CPU6: found redistributor 10102 region 6:0x000000004d280000
|
|
[ 0.057135] GICv3: CPU6: using allocated LPI pending table @0x0000001041790000
|
|
[ 0.057240] arch_timer: CPU6: Trapping CNTVCT access
|
|
[ 0.057245] CPU6: Booted secondary processor 0x0000010102 [0x410fd082]
|
|
[ 0.060131] Detected PIPT I-cache on CPU7
|
|
[ 0.060139] GICv3: CPU7: found redistributor 10103 region 7:0x000000004d2c0000
|
|
[ 0.060149] GICv3: CPU7: using allocated LPI pending table @0x00000010417a0000
|
|
[ 0.060254] arch_timer: CPU7: Trapping CNTVCT access
|
|
[ 0.060259] CPU7: Booted secondary processor 0x0000010103 [0x410fd082]
|
|
[ 0.063131] Detected PIPT I-cache on CPU8
|
|
[ 0.063142] GICv3: CPU8: found redistributor 10200 region 8:0x000000004d300000
|
|
[ 0.063155] GICv3: CPU8: using allocated LPI pending table @0x00000010417b0000
|
|
[ 0.063260] arch_timer: CPU8: Trapping CNTVCT access
|
|
[ 0.063265] CPU8: Booted secondary processor 0x0000010200 [0x410fd082]
|
|
[ 0.066156] Detected PIPT I-cache on CPU9
|
|
[ 0.066165] GICv3: CPU9: found redistributor 10201 region 9:0x000000004d340000
|
|
[ 0.066175] GICv3: CPU9: using allocated LPI pending table @0x00000010417c0000
|
|
[ 0.066281] arch_timer: CPU9: Trapping CNTVCT access
|
|
[ 0.066287] CPU9: Booted secondary processor 0x0000010201 [0x410fd082]
|
|
[ 0.069170] Detected PIPT I-cache on CPU10
|
|
[ 0.069179] GICv3: CPU10: found redistributor 10202 region 10:0x000000004d380000
|
|
[ 0.069189] GICv3: CPU10: using allocated LPI pending table @0x00000010417d0000
|
|
[ 0.069294] arch_timer: CPU10: Trapping CNTVCT access
|
|
[ 0.069301] CPU10: Booted secondary processor 0x0000010202 [0x410fd082]
|
|
[ 0.072174] Detected PIPT I-cache on CPU11
|
|
[ 0.072183] GICv3: CPU11: found redistributor 10203 region 11:0x000000004d3c0000
|
|
[ 0.072194] GICv3: CPU11: using allocated LPI pending table @0x00000010417e0000
|
|
[ 0.072300] arch_timer: CPU11: Trapping CNTVCT access
|
|
[ 0.072305] CPU11: Booted secondary processor 0x0000010203 [0x410fd082]
|
|
[ 0.075192] Detected PIPT I-cache on CPU12
|
|
[ 0.075203] GICv3: CPU12: found redistributor 10300 region 12:0x000000004d400000
|
|
[ 0.075217] GICv3: CPU12: using allocated LPI pending table @0x00000010417f0000
|
|
[ 0.075324] arch_timer: CPU12: Trapping CNTVCT access
|
|
[ 0.075330] CPU12: Booted secondary processor 0x0000010300 [0x410fd082]
|
|
[ 0.078222] Detected PIPT I-cache on CPU13
|
|
[ 0.078231] GICv3: CPU13: found redistributor 10301 region 13:0x000000004d440000
|
|
[ 0.078242] GICv3: CPU13: using allocated LPI pending table @0x0000001042c00000
|
|
[ 0.078346] arch_timer: CPU13: Trapping CNTVCT access
|
|
[ 0.078352] CPU13: Booted secondary processor 0x0000010301 [0x410fd082]
|
|
[ 0.081232] Detected PIPT I-cache on CPU14
|
|
[ 0.081242] GICv3: CPU14: found redistributor 10302 region 14:0x000000004d480000
|
|
[ 0.081253] GICv3: CPU14: using allocated LPI pending table @0x0000001042c10000
|
|
[ 0.081357] arch_timer: CPU14: Trapping CNTVCT access
|
|
[ 0.081362] CPU14: Booted secondary processor 0x0000010302 [0x410fd082]
|
|
[ 0.084249] Detected PIPT I-cache on CPU15
|
|
[ 0.084259] GICv3: CPU15: found redistributor 10303 region 15:0x000000004d4c0000
|
|
[ 0.084270] GICv3: CPU15: using allocated LPI pending table @0x0000001042c20000
|
|
[ 0.084374] arch_timer: CPU15: Trapping CNTVCT access
|
|
[ 0.084379] CPU15: Booted secondary processor 0x0000010303 [0x410fd082]
|
|
[ 0.087293] Detected PIPT I-cache on CPU16
|
|
[ 0.087312] GICv3: CPU16: found redistributor 30000 region 16:0x000000006d100000
|
|
[ 0.087335] GICv3: CPU16: using allocated LPI pending table @0x0000001042c30000
|
|
[ 0.087452] arch_timer: CPU16: Trapping CNTVCT access
|
|
[ 0.087461] CPU16: Booted secondary processor 0x0000030000 [0x410fd082]
|
|
[ 0.090414] Detected PIPT I-cache on CPU17
|
|
[ 0.090425] GICv3: CPU17: found redistributor 30001 region 17:0x000000006d140000
|
|
[ 0.090436] GICv3: CPU17: using allocated LPI pending table @0x0000001042c40000
|
|
[ 0.090540] arch_timer: CPU17: Trapping CNTVCT access
|
|
[ 0.090546] CPU17: Booted secondary processor 0x0000030001 [0x410fd082]
|
|
[ 0.093467] Detected PIPT I-cache on CPU18
|
|
[ 0.093479] GICv3: CPU18: found redistributor 30002 region 18:0x000000006d180000
|
|
[ 0.093491] GICv3: CPU18: using allocated LPI pending table @0x0000001042c50000
|
|
[ 0.093596] arch_timer: CPU18: Trapping CNTVCT access
|
|
[ 0.093602] CPU18: Booted secondary processor 0x0000030002 [0x410fd082]
|
|
[ 0.096521] Detected PIPT I-cache on CPU19
|
|
[ 0.096533] GICv3: CPU19: found redistributor 30003 region 19:0x000000006d1c0000
|
|
[ 0.096544] GICv3: CPU19: using allocated LPI pending table @0x0000001042c60000
|
|
[ 0.096648] arch_timer: CPU19: Trapping CNTVCT access
|
|
[ 0.096653] CPU19: Booted secondary processor 0x0000030003 [0x410fd082]
|
|
[ 0.099576] Detected PIPT I-cache on CPU20
|
|
[ 0.099590] GICv3: CPU20: found redistributor 30100 region 20:0x000000006d200000
|
|
[ 0.099605] GICv3: CPU20: using allocated LPI pending table @0x0000001042c70000
|
|
[ 0.099711] arch_timer: CPU20: Trapping CNTVCT access
|
|
[ 0.099717] CPU20: Booted secondary processor 0x0000030100 [0x410fd082]
|
|
[ 0.102652] Detected PIPT I-cache on CPU21
|
|
[ 0.102664] GICv3: CPU21: found redistributor 30101 region 21:0x000000006d240000
|
|
[ 0.102676] GICv3: CPU21: using allocated LPI pending table @0x0000001042c80000[ 0.102782] arch_timer: CPU21: Trapping CNTVCT access
|
|
[ 0.102788] CPU21: Booted secondary processor 0x0000030101 [0x410fd082]
|
|
[ 0.105704] Detected PIPT I-cache on CPU22
|
|
[ 0.105716] GICv3: CPU22: found redistributor 30102 region 22:0x000000006d280000
|
|
[ 0.105728] GICv3: CPU22: using allocated LPI pending table @0x0000001042c90000
|
|
[ 0.105834] arch_timer: CPU22: Trapping CNTVCT access
|
|
[ 0.105840] CPU22: Booted secondary processor 0x0000030102 [0x410fd082]
|
|
[ 0.108761] Detected PIPT I-cache on CPU23
|
|
[ 0.108773] GICv3: CPU23: found redistributor 30103 region 23:0x000000006d2c0000
|
|
[ 0.108785] GICv3: CPU23: using allocated LPI pending table @0x0000001042ca0000
|
|
[ 0.108890] arch_timer: CPU23: Trapping CNTVCT access
|
|
[ 0.108895] CPU23: Booted secondary processor 0x0000030103 [0x410fd082]
|
|
[ 0.111821] Detected PIPT I-cache on CPU24
|
|
[ 0.111836] GICv3: CPU24: found redistributor 30200 region 24:0x000000006d300000
|
|
[ 0.111853] GICv3: CPU24: using allocated LPI pending table @0x0000001042cb0000
|
|
[ 0.111959] arch_timer: CPU24: Trapping CNTVCT access
|
|
[ 0.111966] CPU24: Booted secondary processor 0x0000030200 [0x410fd082]
|
|
[ 0.114905] Detected PIPT I-cache on CPU25
|
|
[ 0.114918] GICv3: CPU25: found redistributor 30201 region 25:0x000000006d340000
|
|
[ 0.114930] GICv3: CPU25: using allocated LPI pending table @0x0000001042cc0000
|
|
[ 0.115033] arch_timer: CPU25: Trapping CNTVCT access
|
|
[ 0.115040] CPU25: Booted secondary processor 0x0000030201 [0x410fd082]
|
|
[ 0.117962] Detected PIPT I-cache on CPU26
|
|
[ 0.117974] GICv3: CPU26: found redistributor 30202 region 26:0x000000006d380000
|
|
[ 0.117986] GICv3: CPU26: using allocated LPI pending table @0x0000001042cd0000
|
|
[ 0.118092] arch_timer: CPU26: Trapping CNTVCT access
|
|
[ 0.118098] CPU26: Booted secondary processor 0x0000030202 [0x410fd082]
|
|
[ 0.121027] Detected PIPT I-cache on CPU27
|
|
[ 0.121040] GICv3: CPU27: found redistributor 30203 region 27:0x000000006d3c0000
|
|
[ 0.121053] GICv3: CPU27: using allocated LPI pending table @0x0000001042ce0000
|
|
[ 0.121155] arch_timer: CPU27: Trapping CNTVCT access
|
|
[ 0.121161] CPU27: Booted secondary processor 0x0000030203 [0x410fd082]
|
|
[ 0.124087] Detected PIPT I-cache on CPU28
|
|
[ 0.124103] GICv3: CPU28: found redistributor 30300 region 28:0x000000006d400000
|
|
[ 0.124121] GICv3: CPU28: using allocated LPI pending table @0x0000001042cf0000
|
|
[ 0.124226] arch_timer: CPU28: Trapping CNTVCT access
|
|
[ 0.124233] CPU28: Booted secondary processor 0x0000030300 [0x410fd082]
|
|
[ 0.127171] Detected PIPT I-cache on CPU29
|
|
[ 0.127184] GICv3: CPU29: found redistributor 30301 region 29:0x000000006d440000
|
|
[ 0.127197] GICv3: CPU29: using allocated LPI pending table @0x0000001042d00000
|
|
[ 0.127299] arch_timer: CPU29: Trapping CNTVCT access
|
|
[ 0.127306] CPU29: Booted secondary processor 0x0000030301 [0x410fd082]
|
|
[ 0.130230] Detected PIPT I-cache on CPU30
|
|
[ 0.130243] GICv3: CPU30: found redistributor 30302 region 30:0x000000006d480000
|
|
[ 0.130256] GICv3: CPU30: using allocated LPI pending table @0x0000001042d10000
|
|
[ 0.130362] arch_timer: CPU30: Trapping CNTVCT access
|
|
[ 0.130368] CPU30: Booted secondary processor 0x0000030302 [0x410fd082]
|
|
[ 0.133289] Detected PIPT I-cache on CPU31
|
|
[ 0.133303] GICv3: CPU31: found redistributor 30303 region 31:0x000000006d4c0000
|
|
[ 0.133317] GICv3: CPU31: using allocated LPI pending table @0x0000001042d20000
|
|
[ 0.133419] arch_timer: CPU31: Trapping CNTVCT access
|
|
[ 0.133426] CPU31: Booted secondary processor 0x0000030303 [0x410fd082]
|
|
[ 0.136641] Detected PIPT I-cache on CPU32
|
|
[ 0.136694] GICv3: CPU32: found redistributor 50000 region 32:0x000004004d100000
|
|
[ 0.136767] GICv3: CPU32: using allocated LPI pending table @0x0000001042d30000
|
|
[ 0.136917] arch_timer: CPU32: Trapping CNTVCT access
|
|
[ 0.136939] CPU32: Booted secondary processor 0x0000050000 [0x410fd082]
|
|
[ 0.140392] Detected PIPT I-cache on CPU33
|
|
[ 0.140422] GICv3: CPU33: found redistributor 50001 region 33:0x000004004d140000
|
|
[ 0.140438] GICv3: CPU33: using allocated LPI pending table @0x0000001042d40000
|
|
[ 0.140542] arch_timer: CPU33: Trapping CNTVCT access
|
|
[ 0.140548] CPU33: Booted secondary processor 0x0000050001 [0x410fd082]
|
|
[ 0.143771] Detected PIPT I-cache on CPU34
|
|
[ 0.143802] GICv3: CPU34: found redistributor 50002 region 34:0x000004004d180000
|
|
[ 0.143818] GICv3: CPU34: using allocated LPI pending table @0x0000001042d50000
|
|
[ 0.143923] arch_timer: CPU34: Trapping CNTVCT access
|
|
[ 0.143928] CPU34: Booted secondary processor 0x0000050002 [0x410fd082]
|
|
[ 0.147162] Detected PIPT I-cache on CPU35
|
|
[ 0.147193] GICv3: CPU35: found redistributor 50003 region 35:0x000004004d1c0000
|
|
[ 0.147210] GICv3: CPU35: using allocated LPI pending table @0x0000001042d60000
|
|
[ 0.147311] arch_timer: CPU35: Trapping CNTVCT access
|
|
[ 0.147316] CPU35: Booted secondary processor 0x0000050003 [0x410fd082]
|
|
[ 0.150558] Detected PIPT I-cache on CPU36
|
|
[ 0.150591] GICv3: CPU36: found redistributor 50100 region 36:0x000004004d200000
|
|
[ 0.150611] GICv3: CPU36: using allocated LPI pending table @0x0000001042d70000
|
|
[ 0.150716] arch_timer: CPU36: Trapping CNTVCT access
|
|
[ 0.150723] CPU36: Booted secondary processor 0x0000050100 [0x410fd082]
|
|
[ 0.153965] Detected PIPT I-cache on CPU37
|
|
[ 0.153996] GICv3: CPU37: found redistributor 50101 region 37:0x000004004d240000
|
|
[ 0.154014] GICv3: CPU37: using allocated LPI pending table @0x0000001042d80000
|
|
[ 0.154117] arch_timer: CPU37: Trapping CNTVCT access
|
|
[ 0.154123] CPU37: Booted secondary processor 0x0000050101 [0x410fd082]
|
|
[ 0.157364] Detected PIPT I-cache on CPU38
|
|
[ 0.157395] GICv3: CPU38: found redistributor 50102 region 38:0x000004004d280000
|
|
[ 0.157411] GICv3: CPU38: using allocated LPI pending table @0x0000001042d90000
|
|
[ 0.157517] arch_timer: CPU38: Trapping CNTVCT access
|
|
[ 0.157523] CPU38: Booted secondary processor 0x0000050102 [0x410fd082]
|
|
[ 0.160761] Detected PIPT I-cache on CPU39
|
|
[ 0.160793] GICv3: CPU39: found redistributor 50103 region 39:0x000004004d2c0000
|
|
[ 0.160809] GICv3: CPU39: using allocated LPI pending table @0x0000001042da0000
|
|
[ 0.160911] arch_timer: CPU39: Trapping CNTVCT access
|
|
[ 0.160917] CPU39: Booted secondary processor 0x0000050103 [0x410fd082]
|
|
[ 0.164152] Detected PIPT I-cache on CPU40
|
|
[ 0.164186] GICv3: CPU40: found redistributor 50200 region 40:0x000004004d300000
|
|
[ 0.164207] GICv3: CPU40: using allocated LPI pending table @0x0000001042db0000
|
|
[ 0.164314] arch_timer: CPU40: Trapping CNTVCT access
|
|
[ 0.164321] CPU40: Booted secondary processor 0x0000050200 [0x410fd082]
|
|
[ 0.167573] Detected PIPT I-cache on CPU41
|
|
[ 0.167605] GICv3: CPU41: found redistributor 50201 region 41:0x000004004d340000
|
|
[ 0.167621] GICv3: CPU41: using allocated LPI pending table @0x0000001042dc0000
|
|
[ 0.167723] arch_timer: CPU41: Trapping CNTVCT access
|
|
[ 0.167729] CPU41: Booted secondary processor 0x0000050201 [0x410fd082]
|
|
[ 0.170971] Detected PIPT I-cache on CPU42
|
|
[ 0.171004] GICv3: CPU42: found redistributor 50202 region 42:0x000004004d380000
|
|
[ 0.171020] GICv3: CPU42: using allocated LPI pending table @0x0000001042dd0000
|
|
[ 0.171125] arch_timer: CPU42: Trapping CNTVCT access
|
|
[ 0.171131] CPU42: Booted secondary processor 0x0000050202 [0x410fd082]
|
|
[ 0.174363] Detected PIPT I-cache on CPU43
|
|
[ 0.174395] GICv3: CPU43: found redistributor 50203 region 43:0x000004004d3c0000
|
|
[ 0.174412] GICv3: CPU43: using allocated LPI pending table @0x0000001042de0000
|
|
[ 0.174514] arch_timer: CPU43: Trapping CNTVCT access
|
|
[ 0.174520] CPU43: Booted secondary processor 0x0000050203 [0x410fd082]
|
|
[ 0.177762] Detected PIPT I-cache on CPU44
|
|
[ 0.177796] GICv3: CPU44: found redistributor 50300 region 44:0x000004004d400000
|
|
[ 0.177818] GICv3: CPU44: using allocated LPI pending table @0x0000001042df0000
|
|
[ 0.177923] arch_timer: CPU44: Trapping CNTVCT access
|
|
[ 0.177931] CPU44: Booted secondary processor 0x0000050300 [0x410fd082]
|
|
[ 0.181168] Detected PIPT I-cache on CPU45
|
|
[ 0.181200] GICv3: CPU45: found redistributor 50301 region 45:0x000004004d440000
|
|
[ 0.181217] GICv3: CPU45: using allocated LPI pending table @0x0000001042e00000
|
|
[ 0.181318] arch_timer: CPU45: Trapping CNTVCT access
|
|
[ 0.181324] CPU45: Booted secondary processor 0x0000050301 [0x410fd082]
|
|
[ 0.184548] Detected PIPT I-cache on CPU46
|
|
[ 0.184582] GICv3: CPU46: found redistributor 50302 region 46:0x000004004d480000
|
|
[ 0.184599] GICv3: CPU46: using allocated LPI pending table @0x0000001042e10000
|
|
[ 0.184704] arch_timer: CPU46: Trapping CNTVCT access
|
|
[ 0.184711] CPU46: Booted secondary processor 0x0000050302 [0x410fd082]
|
|
[ 0.187943] Detected PIPT I-cache on CPU47
|
|
[ 0.187976] GICv3: CPU47: found redistributor 50303 region 47:0x000004004d4c0000
|
|
[ 0.187993] GICv3: CPU47: using allocated LPI pending table @0x0000001042e20000
|
|
[ 0.188095] arch_timer: CPU47: Trapping CNTVCT access
|
|
[ 0.188101] CPU47: Booted secondary processor 0x0000050303 [0x410fd082]
|
|
[ 0.191385] Detected PIPT I-cache on CPU48
|
|
[ 0.191428] GICv3: CPU48: found redistributor 70000 region 48:0x000004006d100000
|
|
[ 0.191479] GICv3: CPU48: using allocated LPI pending table @0x0000001042e30000
|
|
[ 0.191624] arch_timer: CPU48: Trapping CNTVCT access
|
|
[ 0.191634] CPU48: Booted secondary processor 0x0000070000 [0x410fd082]
|
|
[ 0.194930] Detected PIPT I-cache on CPU49
|
|
[ 0.194967] GICv3: CPU49: found redistributor 70001 region 49:0x000004006d140000
|
|
[ 0.194984] GICv3: CPU49: using allocated LPI pending table @0x0000001042e40000
|
|
[ 0.195123] arch_timer: CPU49: Trapping CNTVCT access
|
|
[ 0.195130] CPU49: Booted secondary processor 0x0000070001 [0x410fd082]
|
|
[ 0.198399] Detected PIPT I-cache on CPU50
|
|
[ 0.198436] GICv3: CPU50: found redistributor 70002 region 50:0x000004006d180000
|
|
[ 0.198454] GICv3: CPU50: using allocated LPI pending table @0x0000001042e50000
|
|
[ 0.198594] arch_timer: CPU50: Trapping CNTVCT access
|
|
[ 0.198601] CPU50: Booted secondary processor 0x0000070002 [0x410fd082]
|
|
[ 0.201873] Detected PIPT I-cache on CPU51
|
|
[ 0.201910] GICv3: CPU51: found redistributor 70003 region 51:0x000004006d1c0000
|
|
[ 0.201928] GICv3: CPU51: using allocated LPI pending table @0x0000001042e60000
|
|
[ 0.202068] arch_timer: CPU51: Trapping CNTVCT access
|
|
[ 0.202075] CPU51: Booted secondary processor 0x0000070003 [0x410fd082]
|
|
[ 0.205350] Detected PIPT I-cache on CPU52
|
|
[ 0.205391] GICv3: CPU52: found redistributor 70100 region 52:0x000004006d200000
|
|
[ 0.205415] GICv3: CPU52: using allocated LPI pending table @0x0000001042e70000
|
|
[ 0.205560] arch_timer: CPU52: Trapping CNTVCT access
|
|
[ 0.205571] CPU52: Booted secondary processor 0x0000070100 [0x410fd082]
|
|
[ 0.208865] Detected PIPT I-cache on CPU53
|
|
[ 0.208903] GICv3: CPU53: found redistributor 70101 region 53:0x000004006d240000
|
|
[ 0.208920] GICv3: CPU53: using allocated LPI pending table @0x0000001042e80000
|
|
[ 0.209061] arch_timer: CPU53: Trapping CNTVCT access
|
|
[ 0.209067] CPU53: Booted secondary processor 0x0000070101 [0x410fd082]
|
|
[ 0.212340] Detected PIPT I-cache on CPU54
|
|
[ 0.212377] GICv3: CPU54: found redistributor 70102 region 54:0x000004006d280000
|
|
[ 0.212394] GICv3: CPU54: using allocated LPI pending table @0x0000001042e90000
|
|
[ 0.212535] arch_timer: CPU54: Trapping CNTVCT access
|
|
[ 0.212542] CPU54: Booted secondary processor 0x0000070102 [0x410fd082]
|
|
[ 0.215809] Detected PIPT I-cache on CPU55
|
|
[ 0.215846] GICv3: CPU55: found redistributor 70103 region 55:0x000004006d2c0000
|
|
[ 0.215864] GICv3: CPU55: using allocated LPI pending table @0x0000001042ea0000
|
|
[ 0.216004] arch_timer: CPU55: Trapping CNTVCT access
|
|
[ 0.216011] CPU55: Booted secondary processor 0x0000070103 [0x410fd082]
|
|
[ 0.219294] Detected PIPT I-cache on CPU56
|
|
[ 0.219336] GICv3: CPU56: found redistributor 70200 region 56:0x000004006d300000
|
|
[ 0.219362] GICv3: CPU56: using allocated LPI pending table @0x0000001042eb0000
|
|
[ 0.219505] arch_timer: CPU56: Trapping CNTVCT access
|
|
[ 0.219518] CPU56: Booted secondary processor 0x0000070200 [0x410fd082]
|
|
[ 0.222806] Detected PIPT I-cache on CPU57
|
|
[ 0.222844] GICv3: CPU57: found redistributor 70201 region 57:0x000004006d340000
|
|
[ 0.222861] GICv3: CPU57: using allocated LPI pending table @0x0000001042ec0000
|
|
[ 0.223002] arch_timer: CPU57: Trapping CNTVCT access
|
|
[ 0.223009] CPU57: Booted secondary processor 0x0000070201 [0x410fd082]
|
|
[ 0.226285] Detected PIPT I-cache on CPU58
|
|
[ 0.226323] GICv3: CPU58: found redistributor 70202 region 58:0x000004006d380000
|
|
[ 0.226341] GICv3: CPU58: using allocated LPI pending table @0x0000001042ed0000
|
|
[ 0.226481] arch_timer: CPU58: Trapping CNTVCT access
|
|
[ 0.226488] CPU58: Booted secondary processor 0x0000070202 [0x410fd082]
|
|
[ 0.229770] Detected PIPT I-cache on CPU59
|
|
[ 0.229808] GICv3: CPU59: found redistributor 70203 region 59:0x000004006d3c0000
|
|
[ 0.229828] GICv3: CPU59: using allocated LPI pending table @0x0000001042ee0000
|
|
[ 0.229966] arch_timer: CPU59: Trapping CNTVCT access
|
|
[ 0.229973] CPU59: Booted secondary processor 0x0000070203 [0x410fd082]
|
|
[ 0.233270] Detected PIPT I-cache on CPU60
|
|
[ 0.233312] GICv3: CPU60: found redistributor 70300 region 60:0x000004006d400000
|
|
[ 0.233338] GICv3: CPU60: using allocated LPI pending table @0x0000001042ef0000
|
|
[ 0.233482] arch_timer: CPU60: Trapping CNTVCT access
|
|
[ 0.233494] CPU60: Booted secondary processor 0x0000070300 [0x410fd082]
|
|
[ 0.236784] Detected PIPT I-cache on CPU61
|
|
[ 0.236822] GICv3: CPU61: found redistributor 70301 region 61:0x000004006d440000
|
|
[ 0.236840] GICv3: CPU61: using allocated LPI pending table @0x0000001042f00000
|
|
[ 0.236979] arch_timer: CPU61: Trapping CNTVCT access
|
|
[ 0.236986] CPU61: Booted secondary processor 0x0000070301 [0x410fd082]
|
|
[ 0.240260] Detected PIPT I-cache on CPU62
|
|
[ 0.240299] GICv3: CPU62: found redistributor 70302 region 62:0x000004006d480000
|
|
[ 0.240319] GICv3: CPU62: using allocated LPI pending table @0x0000001042f10000
|
|
[ 0.240462] arch_timer: CPU62: Trapping CNTVCT access
|
|
[ 0.240469] CPU62: Booted secondary processor 0x0000070302 [0x410fd082]
|
|
[ 0.243733] Detected PIPT I-cache on CPU63
|
|
[ 0.243773] GICv3: CPU63: found redistributor 70303 region 63:0x000004006d4c0000
|
|
[ 0.243792] GICv3: CPU63: using allocated LPI pending table @0x0000001042f20000
|
|
[ 0.243931] arch_timer: CPU63: Trapping CNTVCT access
|
|
[ 0.243938] CPU63: Booted secondary processor 0x0000070303 [0x410fd082]
|
|
[ 0.244029] smp: Brought up 2 nodes, 64 CPUs
|
|
[ 0.244231] SMP: Total of 64 processors activated.
|
|
[ 0.244235] CPU features: detected: 32-bit EL0 Support
|
|
[ 0.244239] CPU features: detected: CRC32 instructions
|
|
[ 0.244243] CPU features: detected: 32-bit EL1 Support
|
|
[ 0.244545] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
|
|
[ 0.288916] CPU: All CPU(s) started at EL2
|
|
[ 0.289083] alternatives: patching kernel code
|
|
[ 0.289086] spectre-v4 mitigation disabled by command-line option
|
|
[ 0.717164] node 1 deferred pages initialised in 420ms
|
|
[ 0.890455] node 0 deferred pages initialised in 590ms
|
|
[ 0.905221] devtmpfs: initialized
|
|
[ 0.924841] Registered cp15_barrier emulation handler
|
|
[ 0.924886] Registered setend emulation handler
|
|
[ 0.924891] KASLR disabled due to lack of seed
|
|
[ 0.925026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
|
|
[ 0.925152] futex hash table entries: 16384 (order: 8, 1048576 bytes, vmalloc)
|
|
[ 0.925583] pinctrl core: initialized pinctrl subsystem
|
|
[ 0.925874] SMBIOS 3.0.0 present.
|
|
[ 0.925881] DMI: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018
|
|
[ 0.926244] NET: are'
|
|
[ 0.930564] thermal_sys: Registered thermal governor 'bang_bang'
|
|
[ 0.930567] thermal_sys: Registered thermal governor 'step_wise'
|
|
[ 0.930570] thermal_sys: Registered thermal governor 'user_space'
|
|
[ 0.930676] cpuidle: using governor ladder
|
|
[ 0.930795] cpuidle: using governor menu
|
|
[ 0.930868] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
|
|
[ 0.931677] ASID allocator initialised with 65536 entries
|
|
[ 0.931836] ACPI: bus type PCI registered
|
|
[ 0.931840] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
|
|
[ 0.931958] Serial: AMBA PL011 UART driver
|
|
[ 1.595337] HugeTLB registered 1.00 GiB page size, pre-allocated 64 pages
|
|
[ 1.595345] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
|
|
[ 1.595349] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
|
|
[ 1.595353] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
|
|
[ 1.598328] ACPI: Added _OSI(Module Device)
|
|
[ 1.598332] ACPI: Added _OSI(Processor Device)
|
|
[ 1.598335] ACPI: Added _OSI(3.0 _SCP Extensions)
|
|
[ 1.598338] ACPI: Added _OSI(Processor Aggregator Device)
|
|
[ 1.598342] ACPI: Added _OSI(Linux-Dell-Video)
|
|
[ 1.598345] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
|
|
[ 1.598348] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
|
|
[ 1.600237] ACPI: 1 ACPI AML tables successfully acquired and loaded
|
|
[ 1.601525] ACPI: Interpreter enabled
|
|
[ 1.601528] ACPI: Using GIC for interrupt routing
|
|
[ 1.601546] ACPI: MCFG table detected, 8 entries
|
|
[ 1.612723] ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus e8-ef])
|
|
[ 1.612735] acpi PNP0A08:00oes not support [PCIeHotplug SHPCHotplug PME AER LTR DPC]
|
|
[ 1.613047] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
|
|
[ 1.613053] acpi PNP0A08:00: MCFG quirk: ECAM at [mem 0xbe800000-0xbeffffff] for [bus e8-ef] with hisi_pcie_ops
|
|
[ 1.613757] acpi PNP0A08:00: ECAM area [mem 0xbe800000-0xbeffffff] reserved by PNP0C02:00
|
|
[ 1.614205] acpi PNP0A08:00: ECAM at [mem 0xbe800000-0xbeffffff] for [bus e8-ef]
|
|
[ 1.614242] Remapped I/O 0x00000000bfff0000 to [io 0x0000-0xffff window]
|
|
[ 1.614305] PCI host bridge to bus 0002:e8
|
|
[ 1.614309] pci_bus 0002:e8: root bus resource [mem 0xb0000000-0xbe7fffff window]
|
|
[ 1.614313] pci_bus 0002:e8: root bus resource [io 0x0000-0xffff window]
|
|
[ 1.614317] pci_bus 0002:e8: root bus resource [bus e8-ef]
|
|
[ 1.614335] pci 0002:e8:00.0: [19e5:1610] type 01 class 0x060400
|
|
[ 1.614341] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x4 may corrupt adjacent RW1C bits
|
|
[ 1.614347] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x4 may corrupt adjacent RW1C bits
|
|
[ 1.614353] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x4 may corrupt adjacent RW1C bits
|
|
[ 1.614358] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x4 may corrupt adjacent RW1C bits
|
|
[ 1.614363] pci 0002:e8:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
|
|
[ 1.614367] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x4 may corrupt adjacent RW1C bits
|
|
[ 1.614373] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x4 may corrupt adjacent RW1C bits
|
|
[ 1.614377] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x4 may corrupt adjacent RW1C bits
|
|
[ 1.614383] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x4 may corrupt adjacent RW1C bits
|
|
[ 1.614393] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x3e may corrupt adjacent RW1C bits
|
|
[ 1.614417] pci 0002:e8:00.0: supports D1 D2
|
|
[ 1.614420] pci 0002:e8:00.0: PME# supported from D0 D1 D3hot
|
|
[ 1.614424] pci_bus 0002:e8: 2-byte config write to 0002:e8:00.0 offset 0x44 may corrupt adjacent RW1C bits
|
|
[ 1.665744] pci 0002:e8:00.0: BAR 0: assigned [mem 0xb0000000-0xb000ffff]
|
|
[ 1.665750] pci 0002:e8:00.0: PCI bridge to [bus e9]
|
|
[ 1.665757] pci_bus 0002:e8: resource 4 [mem 0xb0000000-0xbe7fffff window]
|
|
[ 1.665760] pci_bus 0002:e8: resource 5 [io 0x0000-0xffff window]
|
|
[ 1.665868] ACPI: PCI Root Bridge [PCI4] (domain 0004 [bus 48-4f])
|
|
[ 1.665875] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
|
|
[ 1.666032] acpi PNP0A08:01: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR DPC]
|
|
[ 1.666176] acpi PNP0A08:01: _OSC: OS now controls [PCIeCapability]
|
|
[ 1.666181] acpi PNP0A08:01: MCFG quirk: ECAM at [mem 0x7c4800000-0x7c4ffffff] for [bus 48-4f] with hisi_pcie_ops
|
|
[ 1.667197] acpi PNP0A08:01: ECAM area [mem 0x7c4800000-0x7c4ffffff] reserved by PNP0C02:01
|
|
[ 1.667686] acpi PNP0A08:01: ECAM at [mem 0x7c4800000-0x7c4ffffff] for [bus 48-4f]
|
|
[ 1.667720] Remapped I/O 0x00000007ffff0000 to [io 0x10000-0x1ffff window]
|
|
[ 1.667770] PCI host bridge to bus 0004:48
|
|
[ 1.667774] pci_bus 0004:48: Unknown NUMA node; performance will be reduced
|
|
[ 1.667778] pci_bus 0004:48: root bus resource [mem 0x7c5000000-0x7fffeffff window] (bus address [0xc5000000-0xfffeffff])
|
|
[ 1.667782] pci_bus 0004:48: root bus resource [io 0x10000-0x1ffff window] (bus address [0x0000-0xffff])
|
|
[ 1.667786] pci_bus 0004:48: root bus resource [bus 48-4f]
|
|
[ 1.667800] pci 0004:48:00.0: [19e5:1610] type 01 class 0x060400
|
|
[ 1.667809] pci 0004:48:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
|
|
[ 1.667841] pci 0004:48:00.0: supports D1 D2
|
|
[ 1.667845] pci 0004:48:00.0: PME# supported from D0 D1 D3hot
|
|
[ 1.719151] pci 0004:48:00.0: BAR 0: assigned [mem 0x7c5000000-0x7c500ffff]
|
|
[ 1.719156] pci 0004:48:00.0: PCI bridge to [bus 49]
|
|
[ 1.719163] pci_bus 0004:48: resource 4 [mem 0x7c5000000-0x7fffeffff window]
|
|
[ 1.719166] pci_bus 0004:48: resource 5 [io 0x10000-0x1ffff window]
|
|
[ 1.719278] ACPI: PCI Root Bridge [PCI5] (domain 0005 [bus 00-07])
|
|
[ 1.719286] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
|
|
[ 1.719440] acpi PNP0A08:02: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR DPC]
|
|
[ 1.719584] acpi PNP0A08:02: _OSC: OS now controls [PCIeCapability]
|
|
[ 1.719589] acpi PNP0A08:02: MCFG quirk: ECAM at [mem 0x400000000-0x4007fffff] for [bus 00-07] with hisi_pcie_ops
|
|
[ 1.720602] acpi PNP0A08:02: ECAM area [mem 0x400000000-0x4007fffff] reserved by PNP0C02:01
|
|
[ 1.721129] acpi PNP0A08:02: ECAM at [mem 0x400000000-0x4007fffff] for [bus 00-07]
|
|
[ 1.721163] Remapped I/O 0x00000006ffff0000 to [io 0x20000-0x2ffff window]
|
|
[ 1.721213] PCI host bridge to bus 0005:00
|
|
[ 1.721217] pci_bus 0005:00: Unknown NUMA node; performance will be reduced
|
|
[ 1.721221] pci_bus 0005:00: root bus resource [mem 0x440000000-0x4ffffffff window] (bus address [0x40000000-0xffffffff])
|
|
[ 1.721226] pci_bus 0005:00: root bus resource [io 0x20000-0x2ffff window] (bus address [0x0000-0xffff])
|
|
[ 1.721229] pci_bus 0005:00: root bus resource [bus 00-07]
|
|
[ 1.721243] pci 0005:00:00.0: [19e5:1610] type 01 class 0x060400
|
|
[ 1.721252] pci 0005:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
|
|
[ 1.721286] pci 0005:00:00.0: supports D1 D2
|
|
[ 1.721290] pci 0005:00:00.0: PME# supported from D0 D1 D3hot
|
|
[ 1.772598] pci 0005:00:00.0: BAR 0: assigned [mem 0x440000000-0x440000fff]
|
|
[ 1.772604] pci 0005:00:00.0: PCI bridge to [bus 01]
|
|
[ 1.772610] pci_bus 0005:00: resource 4 [mem 0x440000000-0x4ffffffff window]
|
|
[ 1.772614] pci_bus 0005:00: resource 5 [io 0x20000-0x2ffff window]
|
|
[ 1.772729] ACPI: PCI Root Bridge [PCI6] (domain 0006 [bus 08-0f])
|
|
[ 1.772737] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
|
|
[ 1.772891] acpi PNP0A08:03: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR DPC]
|
|
[ 1.773035] acpi PNP0A08:03: _OSC: OS now controls [PCIeCapability]
|
|
[ 1.773040] acpi PNP0A08:03: MCFG quirk: ECAM at [mem 0x740800000-0x740ffffff] for [bus 08-0f] with hisi_pcie_ops
|
|
[ 1.774052] acpi PNP0A08:03: ECAM area [mem 0x740800000-0x740ffffff] reserved by PNP0C02:01
|
|
[ 1.774616] acpi PNP0A08:03: ECAM at [mem 0x740800000-0x740ffffff] for [bus 08-0f]
|
|
[ 1.774649] Remapped I/O 0x000000077fff0000 to [io 0x30000-0x3ffff window]
|
|
[ 1.774699] PCI host bridge to bus 0006:08
|
|
[ 1.774703] pci_bus 0006:08: Unknown NUMA node; performance will be reduced
|
|
[ 1.774707] pci_bus 0006:08: root bus resource [mem 0x741000000-0x77ffeffff window] (bus address [0x41000000-0x7ffeffff])
|
|
[ 1.774712] pci_bus 0006:08: root bus resource [io 0x30000-0x3ffff window] (bus address [0x0000-0xffff])
|
|
[ 1.774716] pci_bus 0006:08: root bus resource [bus 08-0f]
|
|
[ 1.774729] pci 0006:08:00.0: [19e5:1610] type 01 class 0x060400
|
|
[ 1.774738] pci 0006:08:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
|
|
[ 1.774770] pci 0006:08:00.0: supports D1 D2
|
|
[ 1.774773] pci 0006:08:00.0: PME# supported from D0 D1 D3hot
|
|
[ 1.826083] pci 0006:08:00.0: BAR 0: assigned [mem 0x741000000-0x74100ffff]
|
|
[ 1.826088] pci 0006:08:00.0: PCI bridge to [bus 09]
|
|
[ 1.826095] pci_bus 0006:08: resource 4 [mem 0x741000000-0x77ffeffff window]
|
|
[ 1.826099] pci_bus 0006:08: resource 5 [io 0x30000-0x3ffff window]
|
|
[ 1.826210] ACPI: PCI Root Bridge [PCI7] (domain 0007 [bus 40-47])
|
|
[ 1.826217] acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
|
|
[ 1.826371] acpi PNP0A08:04: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR DPC]
|
|
[ 1.826515] acpi PNP0A08:04: _OSC: OS now controls [PCIeCapability]
|
|
[ 1.826519] acpi PNP0A08:04: MCFG quirk: ECAM at [mem 0x784000000-0x7847fffff] for [bus 40-47] with hisi_pcie_ops
|
|
[ 1.827532] acpi PNP0A08:04: ECAM area [mem 0x784000000-0x7847fffff] reserved by PNP0C02:01
|
|
[ 1.828134] acpi PNP0A08:04: ECAM at [mem 0x784000000-0x7847fffff] for [bus 40-47]
|
|
[ 1.828168] Remapped I/O 0x00000007bfff0000 to [io 0x40000-0x4ffff window]
|
|
[ 1.828219] PCI host bridge to bus 0007:40
|
|
[ 1.828223] pci_bus 0007:40: Unknown NUMA node; performance will be reduced
|
|
[ 1.828226] pci_bus 0007:40: root bus resource [mem 0x784800000-0x7bffeffff window] (bus address [0x84800000-0xbffeffff])
|
|
[ 1.828231] pci_bus 0007:40: root bus resource [io 0x40000-0x4ffff window] (bus address [0x0000-0xffff])
|
|
[ 1.828235] pci_bus 0007:40: root bus resource [bus 40-47]
|
|
[ 1.828248] pci 0007:40:00.0: [19e5:1610] type 01 class 0x060400
|
|
[ 1.828283] pci 0007:40:00.0: supports D1 D2
|
|
[ 1.828286] pci 0007:40:00.0: PME# supported from D0 D1 D3hot
|
|
[ 1.828399] pci 0007:41:00.0: [19e5:1711] type 00 class 0x030000
|
|
[ 1.828421] pci 0007:41:00.0: reg 0x10: [mem 0x786000000-0x787ffffff pref]
|
|
[ 1.828434] pci 0007:41:00.0: reg 0x14: [mem 0x784800000-0x7849fffff]
|
|
[ 1.828543] pci 0007:41:00.0: supports D1
|
|
[ 1.828546] pci 0007:41:00.0: PME# supported from D0 D1 D3hot
|
|
[ 1.828648] pci 0007:40:00.0: BAR 15: assigned [mem 0x786000000-0x787ffffff pref]
|
|
[ 1.828653] pci 0007:40:00.0: BAR 14: assigned [mem 0x784800000-0x7849fffff]
|
|
[ 1.828658] pci 0007:41:00.0: BAR 0: assigned [mem 0x786000000-0x787ffffff pref]
|
|
[ 1.828664] pci 0007:41:00.0: BAR 1: assigned [mem 0x784800000-0x7849fffff]
|
|
[ 1.828671] pci 0007:40:00.0: PCI bridge to [bus 41]
|
|
[ 1.828675] pci 0007:40:00.0: bridge window [mem 0x784800000-0x7849fffff]
|
|
[ 1.828679] pci 0007:40:00.0: bridge window [mem 0x786000000-0x787ffffff pref]
|
|
[ 1.828684] pci_bus 0007:40: resource 4 [mem 0x784800000-0x7bffeffff window]
|
|
[ 1.828688] pci_bus 0007:40: resource 5 [io 0x40000-0x4ffff window]
|
|
[ 1.828691] pci_bus 0007:41: resource 1 [mem 0x784800000-0x7849fffff]
|
|
[ 1.828695] pci_bus 0007:41: resource 2 [mem 0x786000000-0x787ffffff pref]
|
|
[ 1.828816] ACPI: PCI Root Bridge [PCIA] (domain 000a [bus 10-1f])
|
|
[ 1.828823] acpi PNP0A08:05: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
|
|
[ 1.828978] acpi PNP0A08:05: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR DPC]
|
|
[ 1.829121] acpi PNP0A08:05: _OSC: OS now controls [PCIeCapability]
|
|
[ 1.829126] acpi PNP0A08:05: MCFG quirk: ECAM at [mem 0x64001000000-0x64001ffffff] for [bus 10-1f] with hisi_pcie_ops
|
|
[ 1.830187] acpi PNP0A08:05: ECAM area [mem 0x64001000000-0x64001ffffff] reserved by PNP0C02:02
|
|
[ 1.830815] acpi PNP0A08:05: ECAM at [mem 0x64001000000-0x64001ffffff] for [bus 10-1f]
|
|
[ 1.830849] Remapped I/O 0x0000067fffff0000 to [io 0x50000-0x5ffff window]
|
|
[ 1.830900] PCI host bridge to bus 000a:10
|
|
[ 1.830904] pci_bus 000a:10: root bus resource [mem 0x65040000000-0x650ffffffff window] (bus address [0x40000000-0xffffffff])
|
|
[ 1.830909] pci_bus 000a:10: root bus resource [io 0x50000-0x5ffff window] (bus address [0x0000-0xffff])
|
|
[ 1.830912] pci_bus 000a:10: root bus resource [bus 10-1f]
|
|
[ 1.830927] pci 000a:10:00.0: [19e5:1610] type 01 class 0x060400
|
|
[ 1.830936] pci 000a:10:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
|
|
[ 1.830973] pci 000a:10:00.0: supports D1 D2
|
|
[ 1.830976] pci 000a:10:00.0: PME# supported from D0 D1 D3hot
|
|
[ 1.882293] pci 000a:10:00.0: BAR 0: assigned [mem 0x65040000000-0x6504000ffff]
|
|
[ 1.882298] pci 000a:10:00.0: PCI bridge to [bus 11]
|
|
[ 1.882305] pci_bus 000a:10: resource 4 [mem 0x65040000000-0x650ffffffff window]
|
|
[ 1.882309] pci_bus 000a:10: resource 5 [io 0x50000-0x5ffff window]
|
|
[ 1.882410] ACPI: PCI Root Bridge [PCIC] (domain 000c [bus 20-2f])
|
|
[ 1.882417] acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
|
|
[ 1.882570] acpi PNP0A08:06: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR DPC]
|
|
[ 1.882713] acpi PNP0A08:06: _OSC: OS now controls [PCIeCapability]
|
|
[ 1.882718] acpi PNP0A08:06: MCFG quirk: ECAM at [mem 0x74002000000-0x74002ffffff] for [bus 20-2f] with hisi_pcie_ops
|
|
[ 1.883953] acpi PNP0A08:06: ECAM area [mem 0x74002000000-0x74002ffffff] reserved by PNP0C02:03
|
|
[ 1.884626] acpi PNP0A08:06: ECAM at [mem 0x74002000000-0x74002ffffff] for [bus 20-2f]
|
|
[ 1.884659] Remapped I/O 0x0000077fffff0000 to [io 0x60000-0x6ffff window]
|
|
[ 1.884712] PCI host bridge to bus 000c:20
|
|
[ 1.884715] pci_bus 000c:20: Unknown NUMA node; performance will be reduced
|
|
[ 1.884720] pci_bus 000c:20: root bus resource [mem 0x75040000000-0x750ffffffff window] (bus address [0x40000000-0xffffffff])
|
|
[ 1.884724] pci_bus 000c:20: root bus resource [io 0x60000-0x6ffff window] (bus address [0x0000-0xffff])
|
|
[ 1.884727] pci_bus 000c:20: root bus resource [bus 20-2f]
|
|
[ 1.884743] pci 000c:20:00.0: [19e5:1610] type 01 class 0x060400
|
|
[ 1.884753] pci 000c:20:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
|
|
[ 1.884795] pci 000c:20:00.0: supports D1 D2
|
|
[ 1.884798] pci 000c:20:00.0: PME# supported from D0 D1 D3hot
|
|
[ 1.936138] pci 000c:20:00.0: BAR 0: assigned [mem 0x75040000000-0x7504000ffff]
|
|
[ 1.936144] pci 000c:20:00.0: PCI bridge to [bus 21]
|
|
[ 1.936152] pci_bus 000c:20: resource 4 [mem 0x75040000000-0x750ffffffff window]
|
|
[ 1.936156] pci_bus 000c:20: resource 5 [io 0x60000-0x6ffff window]
|
|
[ 1.936267] ACPI: PCI Root Bridge [PCID] (domain 000d [bus 30-3f])
|
|
[ 1.936274] acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
|
|
[ 1.936428] acpi PNP0A08:07: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR DPC]
|
|
[ 1.936572] acpi PNP0A08:07: _OSC: OS now controls [PCIeCapability]
|
|
[ 1.936577] acpi PNP0A08:07: MCFG quirk: ECAM at [mem 0x78003000000-0x78003ffffff] for [bus 30-3f] with hisi_pcie_ops
|
|
[ 1.937811] acpi PNP0A08:07: ECAM area [mem 0x78003000000-0x78003ffffff] reserved by PNP0C02:03
|
|
[ 1.938515] acpi PNP0A08:07: ECAM at [mem 0x78003000000-0x78003ffffff] for [bus 30-3f]
|
|
[ 1.938549] Remapped I/O 0x000007bfffff0000 to [io 0x70000-0x7ffff window]
|
|
[ 1.938607] PCI host bridge to bus 000d:30
|
|
[ 1.938611] pci_bus 000d:30: Unknown NUMA node; performance will be reduced
|
|
[ 1.938614] pci_bus 000d:30: root bus resource [mem 0x79040000000-0x790ffffffff window] (bus address [0x40000000-0xffffffff])
|
|
[ 1.938619] pci_bus 000d:30: root bus resource [io 0x70000-0x7ffff window] (bus address [0x0000-0xffff])
|
|
[ 1.938623] pci_bus 000d:30: root bus resource [bus 30-3f]
|
|
[ 1.938639] pci 000d:30:00.0: [19e5:1610] type 01 class 0x060400
|
|
[ 1.938649] pci 000d:30:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
|
|
[ 1.938694] pci 000d:30:00.0: supports D1 D2
|
|
[ 1.938697] pci 000d:30:00.0: PME# supported from D0 D1 D3hot
|
|
[ 1.990034] pci 000d:30:00.0: BAR 0: assigned [mem 0x79040000000-0x79040000fff]
|
|
[ 1.990040] pci 000d:30:00.0: PCI bridge to [bus 31]
|
|
[ 1.990048] pci_bus 000d:30: resource 4 [mem 0x79040000000-0x790ffffffff window]
|
|
[ 1.990052] pci_bus 000d:30: resource 5 [io 0x70000-0x7ffff window]
|
|
[ 1.991271] iommu: Default domain type: Passthrough
|
|
[ 1.991371] pci 0007:41:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
|
|
[ 1.991377] pci 0007:41:00.0: vgaarb: bridge control possible
|
|
[ 1.991381] pci 0007:41:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
|
|
[ 1.991384] vgaarb: loaded
|
|
[ 1.991668] SCSI subsystem initialized
|
|
[ 1.991902] pps_core: LinuxPPS API ver. 1 registered
|
|
[ 1.991906] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
|
[ 1.991912] PTP clock support registered
|
|
[ 1.991939] EDAC MC: Ver: 3.0.0
|
|
[ 1.992134] Registered efivars operations
|
|
[ 1.993598] NetLabel: Initializing
|
|
[ 1.993601] NetLabel: domain hash size = 128
|
|
[ 1.993603] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
|
|
[ 1.993625] NetLabel: unlabeled traffic allowed by default
|
|
[ 1.993945] clocksource: Switched to clocksource arch_sys_counter
|
|
[ 2.018364] VFS: Disk quotas dquot_6.6.0
|
|
[ 2.018399] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
|
|
[ 2.018717] AppArmor: AppArmor Filesystem Enabled
|
|
[ 2.018750] pnp: PnP ACPI init
|
|
[ 2.019137] system 00:01: [mem 0xa00a0000-0xa00affff] has been reserved
|
|
[ 2.019205] system 00:02: [mem 0xbe800000-0xbeffffff] could not be reserved
|
|
[ 2.019331] system 00:03: [mem 0x700090000-0x70009ffff] has been reserved
|
|
[ 2.019447] system 00:04: [mem 0x700200000-0x70020ffff] has been reserved
|
|
[ 2.019562] system 00:05: [mem 0x7000a0000-0x7000affff] has been reserved
|
|
[ 2.019678] system 00:06: [mem 0x7000b0000-0x7000bffff] has been reserved
|
|
[ 2.019765] system 00:07: [mem 0x7c4800000-0x7c4ffffff] could not be reserved
|
|
[ 2.019770] system 00:07: [mem 0x400000000-0x4007fffff] could not be reserved
|
|
[ 2.019774] system 00:07: [mem 0x740800000-0x740ffffff] could not be reserved
|
|
[ 2.019778] system 00:07: [mem 0x784000000-0x7847fffff] could not be reserved
|
|
[ 2.019875] system 00:08: [mem 0x600a00a0000-0x600a00affff] has been reserved
|
|
[ 2.019942] system 00:09: [mem 0x64001000000-0x64001ffffff] could not be reserved
|
|
[ 2.020058] system 00:0a: [mem 0x700a0090000-0x700a009ffff] has been reserved
|
|
[ 2.020173] system 00:0b: [mem 0x700a0200000-0x700a020ffff] has been reserved
|
|
[ 2.020260] system 00:0c: [mem 0x74002000000-0x74002ffffff] could not be reserved
|
|
[ 2.020265] system 00:0c: [mem 0x78003000000-0x78003ffffff] could not be reserved
|
|
[ 2.020297] pnp: PnP ACPI: found 13 devices
|
|
[ 2.022962] NET: Registered protocol family 2
|
|
[ 2.024592] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
|
|
[ 2.025268] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
|
|
[ 2.026185] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
|
|
[ 2.026470] TCP: Hash tables configured (established 524288 bind 65536)
|
|
[ 2.027271] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, vmalloc)
|
|
[ 2.027785] UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
|
|
[ 2.028411] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
|
|
[ 2.029066] NET: Registered protocol family 1
|
|
[ 2.029077] NET: Registered protocol family 44
|
|
[ 2.029105] PCI: CLS 0 bytes, default 64
|
|
[ 2.029165] Trying to unpack rootfs image as initramfs...
|
|
[ 3.012037] Freeing initrd memory: 10080K
|
|
[ 3.015105] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
|
|
[ 3.015300] kvm [1]: IPA Size Limit: 44 bits
|
|
[ 3.016662] kvm [1]: GICv4 support disabled
|
|
[ 3.016666] kvm [1]: vgic-v2@fe020000
|
|
[ 3.016699] kvm [1]: GIC system register CPU interface enabled
|
|
[ 3.017623] kvm [1]: vgic interrupt IRQ9[ 3.018533] kvm [1]: Hyp mode initialized successfully
|
|
[ 3.020615] Initialise system trusted keyrings
|
|
[ 3.020626] Key type blacklist registered
|
|
[ 3.020752] workingset: timestamp_bits=40 max_order=25 bucket_order=0
|
|
[ 3.022805] zbud: loaded
|
|
[ 3.023570] integrity: Platform Keyring initialized
|
|
[ 3.039507] Key type asymmetric registered
|
|
[ 3.039511] Asymmetric key parser 'x509' registered
|
|
[ 3.039528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
|
|
[ 3.039611] io scheduler mq-deadline registered
|
|
[ 3.039615] io scheduler kyber registered
|
|
[ 3.039659] io scheducan't derive routing for PCI INT A
|
|
[ 3.042169] pcieport 0002:e8:00.0: PCI INT A: no GSI
|
|
[ 3.042213] pcieport 0004:48:00.0: can't derive routing for PCI INT A
|
|
[ 3.042217] pcieport 0004:48:00.0: PCI INT A: no GSI
|
|
[ 3.042240] pcieport 0005:00:00.0: can't derive routing for PCI INT A
|
|
[ 3.042243] pcieport 0005:00:00.0: PCI INT A: no GSI
|
|
[ 3.042265] pcieport 0006:08:00.0: can't derive routing for PCI INT A
|
|
[ 3.042269] pcieport 0006:08:00.0: PCI INT A: no GSI
|
|
[ 3.042290] pcieport 0007:40:00.0: can't derive routing for PCI INT A
|
|
[ 3.042294] pcieport 0007:40:00.0: PCI INT A: no GSI
|
|
[ 3.042318] pcieport 000a:10:00.0: can't derive routing for PCI INT A
|
|
[ 3.042322] pcieport 000a:10:00.0: PCI INT A: no GSI
|
|
[ 3.042347] pcieport 000a:10:00.0: enabling device (0100 -> 0102)
|
|
[ 3.042397] pcieport 000c:20:00.0: can't derive routing for PCI INT A
|
|
[ 3.042402] pcieport 000c:20:00.0: PCI INT A: no GSI
|
|
[ 3.042407] pcieport 000c:20:00.0: enabling device (0100 -> 0102)
|
|
[ 3.042435] pcieport 000d:30:00.0: can't derive routing for PCI INT A
|
|
[ 3.042438] pcieport 000d:30:00.0: PCI INT A: no GSI
|
|
[ 3.042444] pcieport 000d:30:00.0: enabling device (0100 -> 0102)
|
|
[ 3.042508] shpchp 0002:e8:00.0: can't derive routing for PCI INT A
|
|
[ 3.042512] shpchp 0002:e8:00.0: PCI INT A: no GSI
|
|
[ 3.042535] shpchp 0004:48:00.0: can't derive routing for PCI INT A
|
|
[ 3.042538] shpchp 0004:48:00.0: PCI INT A: no GSI
|
|
[ 3.042551] shpchp 0005:00:00.0: can't derive routing for PCI INT A
|
|
[ 3.042555] shpchp 0005:00:00.0: PCI INT A: no GSI
|
|
[ 3.042568] shpchp 0006:08:00.0: can't derive routing for PCI INT A
|
|
[ 3.042572] shpchp 0006:08:00.0: PCI INT A: no GSI
|
|
[ 3.042585] shpchp 0007:40:00.0: can't derive routing for PCI INT A
|
|
[ 3.042589] shpchp 0007:40:00.0: PCI INT A: no GSI
|
|
[ 3.042604] shpchp 000a:10:00.0: can't derive routing for PCI INT A
|
|
[ 3.042608] shpchp 000a:10:00.0: PCI INT A: no GSI
|
|
[ 3.042644] shpchp 000c:20:00.0: can't derive routing for PCI INT A
|
|
[ 3.042648] shpchp 000c:20:00.0: PCI INT A: no GSI
|
|
[ 3.042662] shpchp 000d:30:00.0: can't derive routing for PCI INT A
|
|
[ 3.042666] shpchp 000d:30:00.0: PCI INT A: no GSI
|
|
[ 3.042683] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
|
|
[ 3.043354] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
|
|
[ 3.043390] ACPI: button: Power Button [PWRB]
|
|
[ 3.044599] ACPI GTDT: found 1 SBSA generic Watchdog(s).
|
|
[ 3.046109] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
|
|
[ 3.253928] serial8250.0.auto: ttyS1 at I/O 0xffc2f7 (irq = 0, base_baud = 115200) is a 16550A
|
|
[ 3.254263] Serial: AMBA driver
|
|
[ 3.254345] msm_serial: driver initialized
|
|
[ 3.255440] cacheinfo: Unable to detect cache hierarchy for CPU 0
|
|
[ 3.255879] libphy: Fixed MDIO Bus: probed
|
|
[ 3.256020] mousedev: PS/2 mouse device common for all mice
|
|
[ 3.261865] rtc-efi rtc-efi.0: registered as rtc0
|
|
[ 3.264735] rtc-efi rtc-efi.0: setting system clock to 2021-10-25T15:12:58 UTC (1635174778)
|
|
[ 3.266051] ledtrig-cpu: registered to indicate activity on CPUs
|
|
[ 3.266161] hid: raw HID events driver (C) Jiri Kosina
|
|
[ 3.266799] drop_monitor: Initializing network drop monitor service
|
|
[ 3.267053] NET: Registered protocol family 10
|
|
[ 3.286450] Segment Routing with IPv6
|
|
[ 3.286455] RPL Segment Routing with IPv6
|
|
[ 3.286640] registered taskstats version 1
|
|
[ 3.286651] Loading compiled-in X.509 certificates
|
|
[ 3.287034] Loaded X.509 cert 'Kernel OBS Project: 1fb41512acbc8eebdf828d877e4367bf6c719af3'
|
|
[ 3.289058] zswap: loaded using pool lzo/zbud
|
|
[ 3.289178] page_owner is disabled
|
|
[ 3.289390] Key type ._fscrypt registered
|
|
[ 3.289394] Key type .fscrypt registered
|
|
[ 3.289396] Key type fscrypt-provisioning registered
|
|
[ 3.293086] Key type encrypted registered
|
|
[ 3.293092] AppArmor: AppArmor sha1 policy hashing enabled
|
|
[ 3.293176] ima: No TPM chip found, activating TPM-bypass!
|
|
[ 3.293183] ima: Allocated hash algorithm: sha256
|
|
[ 3.293199] ima: No architecture policies found
|
|
[ 3.293223] evm: Initialising EVM extended attributes:
|
|
[ 3.293225] evm: security.selinux
|
|
[ 3.293228] evm: security.apparmor
|
|
[ 3.293230] evm: security.ima
|
|
[ 3.293232] evm: security.capability
|
|
[ 3.293234] evm: HMAC attrs: 0x1
|
|
[ 3.293648] ARMH0011:00: ttyAMA0 at MMIO 0x602b0000 (irq = 16, base_baud = 0) is a SBSA
|
|
[ 9.232595] printk: console [ttyAMA0] enabled
|
|
[ 9.241768] Freeing unused kernel memory: 6720K
|
|
[ 9.294041] Run /init as init process
|
|
[ 9.405202] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
|
|
[ 9.426524] systemd[1]: Detected architecture arm64.
|
|
[ 9.431480] systemd[1]: Running in initial RAM disk.
|
|
|
|
Welcome to openSUSE Leap 15.2 dracut-049.1+suse.203.g8ee14a90-lp152.2.30.1 (Initramfs)!
|
|
|
|
[ 9.463960] systemd[1]: Set hostname to <openqa-aarch64>.
|
|
[ 9.568635] random: systemd: uninitialized urandom read (16 bytes read)
|
|
[ 9.575265] systemd[1]: Reached target Swap.
|
|
[ OK ] Reached target Swap.
|
|
[ 9.603958] random: systemd: uninitialized urandom read (16 bytes read)
|
|
[ 9.610642] systemd[1]: Listening on Journal Socket.
|
|
[ OK ] Listening on Journal Socket.
|
|
[ 9.643966] random: systemd: uninitialized urandom read (16 bytes read)
|
|
[ 9.650617] systemd[1]: Listening on udev Control Socket.
|
|
[ OK ] Listening on udev Control Socket.
|
|
[ 9.683998] systemd[1]: Listening on Journal Socket (/dev/log).
|
|
[ OK ] Listening on Journal Socket (/dev/log).
|
|
[ 9.714047] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
|
|
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
|
|
[ 9.753963] systemd[1]: Reached target Paths.
|
|
[ OK ] Reached target Paths.
|
|
[ OK ] Listening on udev Kernel Socket.
|
|
[ OK ] Reached target Sockets.
|
|
[ OK ] Reached target Timers.
|
|
[ OK ] Created slice System Slice.
|
|
Starting Load Kernel Modules...
|
|
[ 9.914542] alua: device handler registered
|
|
[ 9.920199] emc: device handler registered
|
|
[ 9.926058] rdac: device handler registered
|
|
Starting Setup Virtual Console...
|
|
[ 9.945365] device-mapper: uevent: version 1.0.3
|
|
[ 9.950083] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
|
|
[ OK ] Reached target Slices.
|
|
[ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
|
|
Starting Create list of required st…ce nodes for the current kernel...
|
|
Starting Journal Service...
|
|
[ OK ] Started Load Kernel Modules.
|
|
[ OK ] Started Setup Virtual Console.
|
|
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
|
|
[ OK ] Started Journal Service.
|
|
Starting Create Static Device Nodes in /dev...
|
|
Starting dracut ask for additional cmdline parameters...
|
|
Starting Apply Kernel Variables...
|
|
[ OK ] Started Create Static Device Nodes in /dev.
|
|
[ OK ] Started Apply Kernel Variables.
|
|
[ OK ] Started dracut ask for additional cmdline parameters.
|
|
Starting dracut cmdline hook...
|
|
[ OK ] Started dracut cmdline hook.
|
|
Starting dracut pre-udev hook...
|
|
[ OK ] Started dracut pre-udev hook.
|
|
Starting udev Kernel Device Manager...
|
|
[ OK ] Started udev Kernel Device Manager.
|
|
Starting udev Coldplug all Devices...
|
|
Mounting Kernel Configuration File System...
|
|
[ OK ] Mounted Kernel Configuration File System.
|
|
[ 10.939804] random: crng init done
|
|
[ 10.943211] random: 7 urandom warning(s) missed due to ratelimiting
|
|
[ OK ] Started udev Coldplug all Devices.
|
|
[ 10.966649] ACPI: bus type USB registered
|
|
[ 10.970720] usbcore: registered new interface driver usbfs
|
|
[ 10.976229] usbcore: registered new interface driver hub
|
|
[ 10.981608] usbcore: registered new device driver usb
|
|
[ 10.986835] scsi host0: hisi_sas_v2_hw
|
|
[ 10.994554] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
|
[ 11.003538] ehci-platform: EHCI generic platform driver
|
|
[ 11.009272] ehci-platform PNP0D20:00: EHCI Host Controller
|
|
[ 11.014765] ehci-platform PNP0D20:00: new USB bus registered, assigned bus number 1
|
|
[ 11.022507] ehci-platform PNP0D20:00: irq 146, io mem 0xa7020000
|
|
[ 11.063928] ehci-platform PNP0D20:00: USB 2.0 started, EHCI 1.00
|
|
[ 11.069994] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
|
|
[ 11.078257] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 11.085476] usb usb1: Product: EHCI Host Controller
|
|
[ 11.090341] usb usb1: Manufacturer: Linux 5.12.2-1.g6fcec30-default ehci_hcd
|
|
[ 11.097383] usb usb1: SerialNumber: PNP0D20:00
|
|
[ 11.102010] hub 1-0:1.0: USB hub found
|
|
[ 11.105766] hub 1-0:1.0: 2 ports detected
|
|
Starting dracut initqueue hook...
|
|
[ 11.215254] scsi host1: hisi_sas_v2_hw
|
|
[ 11.473933] usb 1-1: new high-speed USB device number 2 using ehci-platform
|
|
[ 11.674281] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
|
|
[ 11.682447] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
|
[ 11.689841] hub 1-1:1.0: USB hub found
|
|
[ 11.691752] hisi_sas_v2_hw HISI0162:00: phyup: phy0 link_rate=11
|
|
[ 11.693654] hub 1-1:1.0: 4 ports detected
|
|
[ 11.699587] hisi_sas_v2_hw HISI0162:00: phyup: phy1 link_rate=11
|
|
[ 11.700203] hisi_sas_v2_hw HISI0162:00: dev[0:2] found
|
|
[ 11.703821] hisi_sas_v2_hw HISI0162:00: dev[2:5] found
|
|
[ 11.709583] hisi_sas_v2_hw HISI0162:00: phyup: phy2 link_rate=11
|
|
[ 11.709591] hisi_sas_v2_hw HISI0162:00: phyup: phy3 link_rate=11
|
|
[ 11.709596] hisi_sas_v2_hw HISI0162:00: phyup: phy4 link_rate=11
|
|
[ 11.737825] hisi_sas_v2_hw HISI0162:00: phyup: phy5 link_rate=11
|
|
[ 11.743822] hisi_sas_v2_hw HISI0162:00: phyup: phy6 link_rate=11
|
|
[ 11.749818] hisi_sas_v2_hw HISI0162:00: phyup: phy7 link_rate=11
|
|
[ 11.853930] usb 1-2: new high-speed USB device number 3 using ehci-platform
|
|
[ 11.889983] hisi_sas_v2_hw HISI0162:00: dev[1:1] found
|
|
[ 11.895335] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
|
|
[ 12.054280] usb 1-2: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
|
|
[ 12.062448] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
|
[ 12.069838] hub 1-2:1.0: USB hub found
|
|
[ 12.073653] hub 1-2:1.0: 4 ports detected
|
|
[ 12.393930] usb 1-2.1: new full-speed USB device number 4 using ehci-platform
|
|
[ 12.547779] usb 1-2.1: New USB device found, idVendor=12d1, idProduct=0003, bcdDevice= 1.00
|
|
[ 12.556126] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
|
|
[ 12.563423] usb 1-2.1: Product: Keyboard/Mouse KVM 1.1.0
|
|
[ 12.578286] usbcore: registered new interface driver usbhid
|
|
[ 12.583849] usbhid: USB HID core driver
|
|
[ 12.591926] input: Keyboard/Mouse KVM 1.1.0 as /devices/platform/PNP0D20:00/usb1/1-2/1-2.1/1-2.1:1.0/0003:12D1:0003.0001/input/input1
|
|
[ 12.684214] hid-generic 0003:12D1:0003.0001: input,hidraw0: USB HID v1.10 Keyboard [Keyboard/Mouse KVM 1.1.0] on usb-PNP0D20:00-2.1/input0
|
|
[ 12.696847] input: Keyboard/Mouse KVM 1.1.0 as /devices/platform/PNP0D20:00/usb1/1-2/1-2.1/1-2.1:1.1/0003:12D1:0003.0002/input/input2
|
|
[ 12.708999] hid-generic 0003:12D1:0003.0002: input,hidraw1: USB HID v1.10 Mouse [Keyboard/Mouse KVM 1.1.0] on usb-PNP0D20:00-2.1/input1
|
|
[ 14.144411] ata1.00: ATA-8: INTEL SSDSC2BP480G4, L2010420, max UDMA/133
|
|
[ 14.151019] ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32)
|
|
[ 14.157802] ata1.00: configured for UDMA/133
|
|
[ 14.162081] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
|
|
[ 14.172659] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BP48 0420 PQ: 0 ANSI: 5
|
|
[ 14.181707] scsi 0:0:1:0: Enclosure 12G SAS Expander RevB PQ: 0 ANSI: 6
|
|
[ 14.189917] scsi 0:0:1:0: Power-on or device reset occurred
|
|
[ 14.196712] sas: ex 500e004aaaaaaa1f phy02 change count has changed
|
|
[ 14.208090] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.215938] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.223755] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.231613] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.239407] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.247256] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.255093] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.262947] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.270739] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.278603] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.286423] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.294267] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.302050] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.309903] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.317749] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.325620] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.333397] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.341258] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.349089] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.356942] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.364718] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.372570] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.380403] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.388263] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.396038] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.403878] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.411706] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.419578] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.427365] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.435199] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.443017] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.450869] sas: ex 500e004aaaaaaa1f phys DID NOT change
|
|
[ 14.456477] sd 0:0:0:0: Attached scsi generic sg0 type 0
|
|
[ 14.456560] ata1.00: Enabling discard_zeroes_data
|
|
[ 14.462008] sd 0:0:1:0: Attached scsi generic sg1 type 13
|
|
[ 14.466563] sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
|
|
[ 14.479348] sd 0:0:0:0: [sda] Write Protect is off
|
|
[ 14.484152] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|
[ 14.494684] sda: sda1 sda2 sda3 sda4
|
|
[ 14.500444] ata1.00: Enabling discard_zeroes_data
|
|
[ 14.603969] sd 0:0:0:0: [sda] Attached SCSI disk
|
|
[ OK ] Found device INTEL_SSDSC2BP480G4 1.
|
|
[ 14.803922] raid6: neonx8 gen() 7084 MB/s
|
|
[ 14.973923] raid6: neonx8 xor() 5088 MB/s
|
|
[ 15.143925] raid6: neonx4 gen() 7424 MB/s
|
|
[ 15.313924] raid6: neonx4 xor() 5328 MB/s
|
|
[ 15.483921] raid6: neonx2 gen() 6408 MB/s
|
|
[ 15.653923] raid6: neonx2 xor() 4829 MB/s
|
|
[ 15.823925] raid6: neonx1 gen() 4766 MB/s
|
|
[ 15.993920] raid6: neonx1 xor() 3726 MB/s
|
|
[ 16.163925] raid6: int64x8 gen() 4054 MB/s
|
|
[ 16.333923] raid6: int64x8 xor() 2253 MB/s
|
|
[ 16.503926] raid6: int64x4 gen() 4139 MB/s
|
|
[ 16.673923] raid6: int64x4 xor() 2277 MB/s
|
|
[ 16.843922] raid6: int64x2 gen() 3835 MB/s
|
|
[ 17.013925] raid6: int64x2 xor() 2057 MB/s
|
|
[ 17.183923] raid6: int64x1 gen() 2930 MB/s
|
|
[ 17.353928] raid6: int64x1 xor() 1515 MB/s
|
|
[ 17.358185] raid6: using algorithm neonx4 gen() 7424 MB/s
|
|
[ 17.363570] raid6: .... xor() 5328 MB/s, rmw enabled
|
|
[ 17.368529] raid6: using neon recovery algorithm
|
|
[ 17.375538] xor: measuring software checksum speed
|
|
[ 17.382053] 8regs : 5674 MB/sec
|
|
[ 17.388019] 32regs : 6121 MB/sec
|
|
[ 17.394062] arm64_neon : 5824 MB/sec
|
|
[ 17.398406] xor: using function: 32regs (6121 MB/sec)
|
|
[ 17.511876] Btrfs loaded, crc32c=crc32c-generic, assert=on, zoned=yes
|
|
[ 17.521490] BTRFS: device fsid 3dbaf341-1202-4833-bd3c-146fc3ed8204 devid 1 transid 981298 /dev/sda2 scanned by systemd-udevd (767)
|
|
[ OK ] Found device INTEL_SSDSC2BP480G4 2.
|
|
[ OK ] Started dracut initqueue hook.
|
|
[ OK ] Reached target Remote File Systems (Pre).
|
|
[ OK ] Reached target Remote File Systems.
|
|
[ OK ] Reached target Initrd Root Device.
|
|
Starting File System Check on /dev/…341-1202-4833-bd3c-146fc3ed8204...
|
|
[ OK ] Started File System Check on /dev/d…af341-1202-4833-bd3c-146fc3ed8204.
|
|
Mounting /sysroot...
|
|
[ 17.814406] BTRFS info (device sda2): disk space caching is enabled
|
|
[ 17.820668] BTRFS info (device sda2): has skinny extents
|
|
[ 17.828887] BTRFS info (device sda2): bdev /dev/sda2 errs: wr 42, rd 0, flush 0, corrupt 0, gen 0
|
|
[ 17.842645] BTRFS info (device sda2): enabling ssd optimizations
|
|
[ OK ] Mounted /sysroot.
|
|
[ OK ] Reached target Local File Systems.
|
|
Starting Create Volatile Files and Directories...
|
|
[ OK ] Reached target Initrd Root File System.
|
|
Starting Reload Configuration from the Real Root...
|
|
[ OK ] Started Create Volatile Files and Directories.
|
|
[ OK ] Reached target System Initialization.
|
|
[ OK ] Reached target Basic System.
|
|
Mounting /sysroot/var...
|
|
[ 18.311119] BTRFS info (device sda2): disk space caching is enabled
|
|
[ OK ] Mounted /sysroot/var.
|
|
Mounting /sysroot/etc...
|
|
[ OK ] Mounted /sysroot/etc.
|
|
[ OK ] Started Reload Configuration from the Real Root.
|
|
[ OK ] Reached target Initrd File Systems.
|
|
[ OK ] Reached target Initrd Default Target.
|
|
Starting transactional-update /etc overlay cleaner...
|
|
[ OK ] Started transactional-update /etc overlay cleaner.
|
|
Starting Cleaning Up and Shutting Down Daemons...
|
|
[ OK ] Stopped target Initrd Default Target.
|
|
[ OK ] Stopped target Basic System.
|
|
[ OK ] Stopped target System Initialization.
|
|
[ OK ] Stopped target Swap.
|
|
Stopping udev Kernel Device Manager...
|
|
[ OK ] Stopped Create Volatile Files and Directories.
|
|
[ OK ] Stopped target Local File Systems.
|
|
[ OK ] Stopped target Slices.
|
|
[ OK ] Stopped target Paths.
|
|
[ OK ] Stopped target Sockets.
|
|
[ OK ] Stopped target Initrd Root Device.
|
|
[ OK ] Stopped target Remote File Systems.
|
|
[ OK ] Stopped target Remote File Systems (Pre).
|
|
[ OK ] Stopped dracut initqueue hook.
|
|
[ OK ] Stopped udev Coldplug all Devices.
|
|
[ OK ] Stopped Apply Kernel Variables.
|
|
[ OK ] Stopped Load Kernel Modules.
|
|
[ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
|
|
[ OK ] Stopped target Timers.
|
|
[ OK ] Stopped udev Kernel Device Manager.
|
|
[ OK ] Stopped Create Static Device Nodes in /dev.
|
|
[ OK ] Stopped Create list of required sta…vice nodes for the current kernel.
|
|
[ OK ] Stopped dracut pre-udev hook.
|
|
[ OK ] Stopped dracut cmdline hook.
|
|
[ OK ] Stopped dracut ask for additional cmdline parameters.
|
|
[ OK ] Closed udev Control Socket.
|
|
[ OK ] Closed udev Kernel Socket.
|
|
Starting Cleanup udevd DB...
|
|
[ OK ] Started Cleaning Up and Shutting Down Daemons.
|
|
[ OK ] Started Cleanup udevd DB.
|
|
[ OK ] Reached target Switch Root.
|
|
Starting Switch Root...
|
|
[ 19.816157] systemd-journald[544]: Received SIGTERM from PID 1 (systemd).
|
|
[ 19.845023] printk: systemd: 14 output lines suppressed due to ratelimiting
|
|
|
|
Welcome to openSUSE Leap 15.2!
|
|
|
|
[ OK ] Stopped Switch Root.
|
|
[ OK ] Stopped Journal Service.
|
|
[ OK ] Listening on Syslog Socket.
|
|
Starting Journal Service...
|
|
[ OK ] Created slice system-systemd\x2dfsck.slice.
|
|
Starting Create list of required st…ce nodes for the current kernel...
|
|
Mounting Kernel Debug File System...
|
|
[ OK ] Listening on Device-mapper event daemon FIFOs.
|
|
[ OK ] Listening on LVM2 poll daemon socket.
|
|
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
|
|
Mounting POSIX Message Queue File System...
|
|
[ OK ] Created slice User and Session Slice.
|
|
[ OK ] Reached target Slices.
|
|
[ OK ] Stopped target Switch Root.
|
|
[ OK ] Stopped target Initrd Root File System.
|
|
[ OK ] Stopped target Initrd File Systems.
|
|
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
|
|
[ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
|
|
Starting Load AppArmor profiles...
|
|
Mounting /dev/hugepages...
|
|
[ OK ] Stopped File System Check on Root Device.
|
|
[ 20.839884] audit: type=1400 audit(1635174796.060:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=917 comm="apparmor_parser"
|
|
[ 20.882342] audit: type=1400 audit(1635174796.100:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=936 comm="apparmor_parser"
|
|
Starting Remount Root and Kernel File Systems...
|
|
[ 20.902863] audit: type=1400 audit(1635174796.120:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=947 comm="apparmor_parser"
|
|
[ 20.918155] audit: type=1400 audit(1635174796.120:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=947 comm="apparmor_parser"
|
|
[ 20.933964] audit="apparmor_parser"
|
|
[ 20.948386] audit: type=1400 audit(1635174796.170:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=961 comm="apparmor_parser"
|
|
[ 20.953219] BTRFS info (device sda2): disk space caching is enabled
|
|
[ 20.965606] audit: type=1400 audit(1635174796.190:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=969 comm="apparmor_parser"
|
|
Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling...
|
|
[ 20.989686] audit: type=1400 audit(1635174796.210:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=979 comm="apparmor_parser"
|
|
[ OK ] Reached target Local Encrypte[ 21.016769] audit: type=1400 audit(1635174796.240:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2" pid=986 comm="apparmor_parser"
|
|
d Volumes.
|
|
[ 21.035486] audit: type=1400 audit(1635174796.240:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=986 comm="apparmor_parser"
|
|
[ OK ] Created slice openqa.slice.
|
|
[ OK ] Created slice openqa-worker.slice.
|
|
[ OK ] Listening on udev Kernel Socket.
|
|
[ OK ] Listening on udev Control Socket.
|
|
Starting Load Kernel Modules...
|
|
[ OK ] Created slice system-getty.slice.
|
|
[ OK ] Created slice system-serial\x2dgetty.slice.
|
|
[ OK ] Reached target Remote File Systems (Pre).
|
|
[ OK ] Mounted Kernel Debug File System.
|
|
[ OK ] Mounted POSIX Message Queue File System.
|
|
[ OK ] Mounted /dev/hugepages.
|
|
[ OK ] Started Journal Service.
|
|
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
|
|
[ OK ] Started Remount Root and Kernel File Systems.
|
|
[ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling.
|
|
[ OK ] Started Load Kernel Modules.
|
|
[ OK ] Stopped Entropy Daemon based on the HAVEGE algorithm.
|
|
[ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
|
|
Starting Apply Kernel Variables...
|
|
Starting Load/Save Random Seed...
|
|
Starting udev Coldplug all Devices...
|
|
Starting Create Static Device Nodes in /dev...
|
|
Starting Flush Journal to Persistent Storage...
|
|
[ OK ] Started Load AppArmor profiles.
|
|
[ OK ] Started Load/Save Random Seed.
|
|
[ OK ] Started Create Static Device Nodes in /dev.
|
|
[ OK ] Started Apply Kernel Variables.
|
|
Starting udev Kernel Device Manager...
|
|
[ OK ] Reached target Local File Systems (Pre).
|
|
[ OK ] Started udev Kernel Device Manager.
|
|
[ 22.016247] systemd-journald[892]: Received request to flush runtime journal from PID 1
|
|
[ OK ] Started Flush Journal to Persistent Storage.
|
|
[ OK ] Started udev Coldplug all Devices.
|
|
[ 22.155041] IPMI message handler: version 39.2
|
|
[ OK ] Found device /dev/ttyAMA0.
|
|
[ 22.167164] ipmi device interface
|
|
[ 22.180660] ipmi_si: IPMI System Interface driver
|
|
[ 22.185764] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
|
|
[ 22.185887] pstore: Efi pstore disabled, enforce via pstore.backend=efi
|
|
[ 22.192110] ipmi_platform: ipmi_si: SMBIOS: io 0xe4 regsize 1 spacing 1 irq 0
|
|
[ 22.192112] pstore: On a broken BIOS, this can severely harm your system
|
|
[ 22.192117] pstore: Only enable efi based pstore when you know what you are doing
|
|
[ 22.202721] ipmi_si: Adding SMBIOS-specified bt state machine
|
|
[ 22.207670] sbsa-gwdt sbsa-gwdt.0: Initialized with 10s timeout @ 50000000 Hz, action=0.
|
|
[ 22.213751] ipmi_si hisi-lpc-ipmi.1.auto: ipmi_platform: probing via ACPI
|
|
[ 22.236438] hns_dsaf HISI00B2:00: no mc-mac-mask property, set to default value.
|
|
[ 22.240736] ipmi_si hisi-lpc-ipmi.1.auto: ipmi_platform: [io 0xffc0e3-0xffc0e7] regsize 1 spacing 1 irq 0
|
|
[ 22.253947] libphy: Hisilicon MII Bus: probed
|
|
[ 22.398971] ipmi_si: Adding ACPI-specified bt state machine
|
|
[ 22.402509] ses 0:0:1:0: Attached Enclosure device
|
|
[ 22.404778] ipmi_si: Trying SMBIOS-specified bt state machine at i/o address 0xe4, slave address 0x20, irq 0
|
|
[ OK ] Found device INTEL_SSDSC2BP480G4 1.
|
|
[ 22.504059] hns_dsaf HISI00B2:00: no mc-mac-mask property, set to default value.
|
|
[ 22.521603] ipmi_si dmi-ipmi-si.0: Interface detection failed
|
|
[ 22.523428] cryptd: max_cpu_qlen set to 1000
|
|
[ 22.527344] ipmi_si: Trying ACPI-specified bt state machine at i/o address 0xffc0e3, slave address 0x0, irq 0
|
|
[ OK ] Found device INTEL_SSDSC2BP480G4 3.
|
|
[ 22.563948] ipmi_si hisi-lpc-ipmi.1.auto: bt cap response too short: 3
|
|
[ 22.570467] ipmi_si hisi-lpc-ipmi.1.auto: using default values
|
|
[ 22.576296] ipmi_si hisi-lpc-ipmi.1.auto: req2rsp=5 secs retries=2
|
|
[ OK ] Found device INTEL_SSDSC2BP480G4 4.
|
|
[ OK ] Found device INTEL_SSDSC2BP480G4 2.
|
|
[ 22.704264] pci 0007:40:00.0: can't derive routing for PCI INT A
|
|
[ 22.710283] hibmc-drm 0007:41:00.0: PCI INT A: no GSI
|
|
[ 22.715395] pci_generic_config_write32: 115 callbacks suppressed
|
|
[ 22.715399] pci_bus 0007:40: 2-byte config write to 0007:40:00.0 offset 0x4 may corrupt adjacent RW1C bits
|
|
[ 22.731152] [TTM] Zone kernel: Available graphics memory: 65706562 KiB
|
|
[ 22.737762] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
|
|
[ 22.744047] ipmi_si hisi-lpc-ipmi.1.auto: IPMI message handler: Found new BMC (man_id: 0x0007db, prod_id: 0x0001, dev_id: 0x01)
|
|
[ 22.744752] [drm] Initialized hibmc 1.0.0 20160828 for 0007:41:00.0 on minor 0
|
|
[ 22.772209] hns_dsaf HISI00B2:00: no mc-mac-mask property, set to default value.
|
|
[ 22.789795] Console: switching to colour frame buffer device 128x48
|
|
[ 22.795246] hns_dsaf HISI00B2:00: no mc-mac-mask property, set to default value.
|
|
[ 22.827586] hibmc-drm 0007:41:00.0: [drm] fb0: hibmcdrmfb frame buffer device
|
|
Mounting /root...
|
|
[ 22.844051] BTRFS info (device sda2): disk space caching is enabled
|
|
Mounting /srv...
|
|
[ 22.889253] systemd-journald[892]: File /var/log/journal/a2f1b12461b3453499a68511ad59637a/system.journal corrupted or uncleanly shut down, renaming and replacing.
|
|
Mounting /.snapshots...
|
|
Mounting /opt...
|
|
Mounting /usr/local...
|
|
Mounting /boot/grub2/arm64-efi...
|
|
Mounting /home...
|
|
Activating swap Swap Partition...
|
|
[ 23.099508] Marvell 88E1510 Mii-HISI0141:00:00: attached PHY driver (mii_bus:phy_addr=Mii-HISI0141:00:00, irq=POLL)
|
|
[ 23.114947] Marvell 88E1510 Mii-HISI0141:00:01: attached PHY driver (mii_bus:phy_addr=Mii-HISI0141:00:01, irq=POLL)
|
|
Starting File System Check on /dev/…dde-f472-48fe-b35c-35de23396a50...
|
|
Mounting /boot/efi...
|
|
Starting udev Wait for Complete Device Initialization...
|
|
[ OK ] Mounted /usr/local.
|
|
[ OK ] Mounted /srv.
|
|
[ [ 23.194119] ipmi_si hisi-lpc-ipmi.1.auto: IPMI bt interface initialized
|
|
OK ] Mounted /root.
|
|
[ OK ] Mounted /opt.
|
|
[ OK ][ 23.207490] ipmi_ssif: IPMI SSIF Interface driver
|
|
Mounted /home.
|
|
[ OK ] Mounted /boot/grub2/arm64-efi.
|
|
[ OK ] Mounted /.snapshots.
|
|
[ 23.243955] Adding 2097984k swap on /dev/sda4. Priority:-2 extents:1 across:2097984k SSFS
|
|
[ OK ] Activated swap Swap Partition.
|
|
[ OK ] Reached target Swap.
|
|
Mounting Temporary Directory /tmp...
|
|
[ OK ] Mounted Temporary Directory /tmp.
|
|
[ 23.318394] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
|
|
[ OK ] Mounted /boot/efi.
|
|
[ OK ] Started File System Check on /dev/d…6fdde-f472-48fe-b35c-35de23396a50.
|
|
Mounting /var/lib/openqa...
|
|
[ 23.496461] EXT4-fs (sda3): mounted filesystem with writeback data mode. Opts: data=writeback,commit=1200,dioread_nolock. Quota mode: none.
|
|
[ OK ] Mounted /var/lib/openqa.
|
|
[ OK ] Reached target Local File Systems.
|
|
Starting Early Kernel Boot Messages...
|
|
Starting Create missing directories from rpmdb...
|
|
Starting Restore /run/initramfs on shutdown...
|
|
[ OK ] Started Restore /run/initramfs on shutdown.
|
|
[ OK ] Started Early Kernel Boot Messages.
|
|
[ OK ] Started Create missing directories from rpmdb.
|
|
Starting Create Volatile Files and Directories...
|
|
[ OK ] Started Create Volatile Files and Directories.
|
|
Starting Security Auditing Service...
|
|
[ OK ] Started Security Auditing Service.
|
|
Starting Update UTMP about System Boot/Shutdown...
|
|
[ OK ] Started Update UTMP about System Boot/Shutdown.
|
|
[ OK ] Started udev Wait for Complete Device Initialization.
|
|
[ OK ] Reached target System Initialization.
|
|
[ OK ] Started Watch for changes in CA certificates.
|
|
[ OK ] Started Watch /etc/sysconfig/btrfsmaintenance.
|
|
[ OK ] Started Watch for changes in smartmontools sysconfig file.
|
|
[ OK ] Started Daily Cleanup of Snapper Snapshots.
|
|
[ OK ] Listening on CUPS Scheduler.
|
|
[ OK ] Listening on D-Bus System Message Bus Socket.
|
|
[ OK ] Reached target Sockets.
|
|
[ OK ] Started CUPS Scheduler.
|
|
[ OK ] Reached target Paths.
|
|
[ OK ] Reached target Basic System.
|
|
Starting Update system wide CA certificates...
|
|
Starting Apply settings from /etc/sysconfig/keyboard...
|
|
Starting Name Service Cache Daemon...
|
|
[ OK ] Started irqbalance daemon.
|
|
[ OK ] Started Detect if the system suffers from bsc#1089761.
|
|
Starting System Logging Service...
|
|
Starting Self Monitoring and Reporting Technology (SMART) Daemon...
|
|
[ OK ] Started Daily Cleanup of Temporary Directories.
|
|
[ OK ] Started D-Bus System Message Bus.
|
|
Starting firewalld - dynamic firewall daemon...
|
|
[ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
|
|
[ OK ] Started Apply settings from /etc/sysconfig/keyboard.
|
|
[ OK ] Started Name Service Cache Daemon.
|
|
[ OK ] Reached target Host and Network Name Lookups.
|
|
[ OK ] Reached target User and Group Name Lookups.
|
|
Starting Login Service...
|
|
[ OK ] Started System Logging Service.
|
|
[ OK ] Started Login Service.
|
|
[ OK ] Started Update system wide CA certificates.
|
|
[ OK ] Started firewalld - dynamic firewall daemon.
|
|
[ OK ] Reached target Network (Pre).
|
|
Starting wicked DHCPv4 supplicant service...
|
|
Starting wicked AutoIPv4 supplicant service...
|
|
Starting wicked DHCPv6 supplicant service...
|
|
Starting Open vSwitch Database Unit...
|
|
[ OK ] Started wicked DHCPv4 supplicant service.
|
|
[ OK ] Started wicked AutoIPv4 supplicant service.
|
|
[ OK ] Started wicked DHCPv6 supplicant service.
|
|
[ OK ] Started Open vSwitch Database Unit.
|
|
Starting Open vSwitch Delete Transient Ports...
|
|
[ OK ] Started Open vSwitch Delete Transient Ports.
|
|
Starting Open vSwitch Forwarding Unit...
|
|
[ OK ] Started Open vSwitch Forwarding Unit.
|
|
[ OK ] Started Systemd service to fix huge…suse.org/issues/53234 for details.
|
|
Starting Open vSwitch...
|
|
[ OK ] Started Open vSwitch.
|
|
Starting wicked network management service daemon...
|
|
[ OK ] Started wicked network management service daemon.
|
|
Starting wicked network nanny service...
|
|
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
|
|
[ OK ] Started wicked network nanny service.
|
|
Starting wicked managed network interfaces...
|
|
Starting Authorization Manager...
|
|
[ OK ] Started Authorization Manager.
|
|
[ OK ] Started wicked managed network interfaces.
|
|
[ OK ] Reached target Network.
|
|
Starting os-autoinst openvswitch helper...
|
|
Starting OpenSSH Daemon...
|
|
Starting NTP client/server...
|
|
[ OK ] Reached target Network is Online.
|
|
Mounting /var/lib/openqa/share...
|
|
Starting Reboot Manager...
|
|
[ OK ] Started Reboot Manager.
|
|
[ OK ] Started NTP client/server.
|
|
[ OK ] Started OpenSSH Daemon.
|
|
[ OK ] Reached target System Time Synchronized.
|
|
[ OK ] Started Do daily mandb update.
|
|
[ OK ] Started Scrub btrfs filesystem, verify block checksums.
|
|
[ OK ] Started Backup of /etc/sysconfig.
|
|
[ OK ] Started daily update of the root trust anchor for DNSSEC.
|
|
[ OK ] Started Discard unused blocks once a week.
|
|
[ OK ] Started Check if mainboard battery is Ok.
|
|
[ OK ] Started Daily update of the system.
|
|
[ OK ] Started Timeline of Snapper Snapshots.
|
|
Starting Postfix Mail Transport Agent...
|
|
[ OK ] Started Daily rotation of log files.
|
|
[ OK ] Started Backup of RPM database.
|
|
[ OK ] Started Balance block groups on a btrfs filesystem.
|
|
[ OK ] Reached target Timers.
|
|
[ OK ] Mounted /var/lib/openqa/share.
|
|
[ OK ] Started os-autoinst openvswitch helper.
|
|
[ OK ] Reached target Remote File Systems.
|
|
[ OK ] Started OpenQA Worker Cache Service.
|
|
[ OK ] Started OpenQA Worker Cache Service Minion.
|
|
Starting openQA Worker #4...
|
|
Starting openQA Worker #1...
|
|
Starting openQA Worker #11...
|
|
Starting openQA Worker #8...
|
|
Starting openQA Worker #3...
|
|
Starting openQA Worker #15...
|
|
Starting openQA Worker #5...
|
|
Starting Write information about system start to sysstat log...
|
|
Starting openQA Worker #6...
|
|
Starting openQA Worker #10...
|
|
Starting openQA Worker #14...
|
|
Starting openQA Worker #12...
|
|
Starting openQA Worker #16...
|
|
Starting openQA Worker #9...
|
|
Starting Permit User Sessions...
|
|
Starting openQA Worker #7...
|
|
Starting openQA Worker #13...
|
|
Starting openQA Worker #2...
|
|
[ OK ] Started openQA Worker #4.
|
|
[ OK ] Started openQA Worker #1.
|
|
[ OK ] Started openQA Worker #11.
|
|
[ OK ] Started openQA Worker #8.
|
|
[ OK ] Started openQA Worker #3.
|
|
[ OK ] Started openQA Worker #15.
|
|
[ OK ] Started openQA Worker #5.
|
|
[ OK ] Started openQA Worker #6.
|
|
[ OK ] Started openQA Worker #10.
|
|
[ OK ] Started openQA Worker #14.
|
|
[ OK ] Started openQA Worker #12.
|
|
[ OK ] Started openQA Worker #16.
|
|
[ OK ] Started openQA Worker #9.
|
|
[ OK ] Started Permit User Sessions.
|
|
[ OK ] Started openQA Worker #7.
|
|
[ OK ] Started openQA Worker #13.
|
|
[ OK ] Started openQA Worker #2.
|
|
[ OK ] Started Write information about system start to sysstat log.
|
|
[ OK ] Started Serial Getty on ttyAMA0.
|
|
[ OK ] Started Getty on tty1.
|
|
[ OK ] Reached target Login Prompts.
|
|
[ OK ] Started Postfix Mail Transport Agent.
|
|
[ OK ] Started Command Scheduler.
|
|
[ OK ] Reached target Multi-User System.
|
|
Starting Update UTMP about System Runlevel Changes...
|
|
[ OK ] Started Update UTMP about System Runlevel Changes.
|
|
|
|
Welcome to openSUSE Leap 15.2 - Kernel 5.12.2-1.g6fcec30-default (ttyAMA0).
|
|
|
|
|
|
openqa-aarch64 login: root
|
|
Password:
|
|
Last login: Mon Oct 25 16:02:40 from 192.168.112.100
|
|
Have a lot of fun...
|
|
openqa-aarch64:~ # [ME] Fault detect start!
|
|
[ME] Fault detect start!
|
|
|