QA » openQA Project » openQA Infrastructure

Observation¶

Can not establish ipmi sol connnection to ix64ph1075-sp.qe.nue2.suse.org

10:~ # ipmitool -I lanplus -H ix64ph1075-sp.qe.nue2.suse.org -U admin -P xxxxx chassis power status
Error: Unable to establish IPMI v2 / RMCP+ session
10:~ # ipmitool -I lanplus -H ix64ph1075-sp.qe.nue2.suse.org -U admin -P xxxxx sol deactivate
Error: Unable to establish IPMI v2 / RMCP+ session
10:~ # ping -c5 ix64ph1075-sp.qe.nue2.suse.org
PING ix64ph1075-sp.qe.nue2.suse.org (10.168.192.204) 56(84) bytes of data.
64 bytes from ix64ph1075-sp.qe.nue2.suse.org (10.168.192.204): icmp_seq=1 ttl=60 time=253 ms
64 bytes from ix64ph1075-sp.qe.nue2.suse.org (10.168.192.204): icmp_seq=2 ttl=60 time=253 ms
64 bytes from ix64ph1075-sp.qe.nue2.suse.org (10.168.192.204): icmp_seq=3 ttl=60 time=252 ms
64 bytes from ix64ph1075-sp.qe.nue2.suse.org (10.168.192.204): icmp_seq=4 ttl=60 time=252 ms
64 bytes from ix64ph1075-sp.qe.nue2.suse.org (10.168.192.204): icmp_seq=5 ttl=60 time=252 ms

--- ix64ph1075-sp.qe.nue2.suse.org ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 251.921/252.314/252.797/0.371 ms

Steps to reproduce¶

• Use ipmitool to do operation

Impact¶

Test run keeps failing, for example, this one.

Problem¶

Looks like something wrong with management unit

Suggestions¶

• Check management unit state
• Check error/warning report from management unit
• Check management unit configuration
• Check ipmi sol is enabled

Workaround¶

n/a