openSUSE Project Management Tool: Issueshttps://progress.opensuse.org/https://progress.opensuse.org/themes/openSUSE/favicon/favicon.ico?15829177842021-07-13T15:29:46ZopenSUSE Project Management Tool
Redmine openQA Tests - action #95455 (Rejected): [qac][kernel] Make record_soft_failure shows error as re...https://progress.opensuse.org/issues/954552021-07-13T15:29:46Zybonatakisioannis.bonatakis@suse.com
<p>The idea is that when there is a bug open we have <code>record_soft_failure</code> to workaround in the test level.<br>
But when the bug is resolved there are two approach AFAIK. remove the softfail or leave it intact to find regressions. <br>
however when the bug is gone and softfail still exists in the code, there is not an easy way to distinguish the regression.</p>
<p>I propose to enhance the <code>record_soft_failure</code> to show the regression. One idea is to introduce a flag(extra param?) which we can switch <br>
when the bug has been resolved. Then we can either make the test fail*[1] or show the soft_fail with another colour.</p>
<p>I am not sure if this is the best approach so please comment below if something better comes in your mind.</p>
<p>*[1] maybe we can introduce a parameter to define severity. Then if(critical)->(fail)->else(pass) </p>
openQA Tests - action #71896 (Rejected): [y] Expert partitioning framework refactoringhttps://progress.opensuse.org/issues/718962020-09-25T10:38:14Zybonatakisioannis.bonatakis@suse.com
<p>As we are expanding and adding new subroutines in the framework we need to consider some refactoring to avoid duplication and make it more usable. </p>
<p>Things to refactor:</p>
<ul>
<li>_set_partitioning subroutine</li>
<li>this does not work for all the partitioning options</li>
<li>_encrypt_with_lvm subroutine</li>
<li>The encryption should work for a higher level for all the Pages that implement encryption</li>
<li>select_item_in_system_view_table subroutine</li>
<li>replace if-else with state design or find another solution.</li>
<li>Consider expansion?</li>
<li>naming of the Pages</li>
<li>The pages use the name of the page that they access but it is hard to tell if which proposal(current or suggested) comes from </li>
</ul>
<p>Let start with small things because more can come up but design is something that need to be always a task in progress but we cant cover everything.</p>
openQA Tests - action #68908 (Rejected): [y] Remove deprecated sections from autoyast profilehttps://progress.opensuse.org/issues/689082020-07-13T07:10:25Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-autoyast_tftp@64bit fails in<br>
<a href="https://openqa.suse.de/tests/4445217/modules/installation/steps/5" class="external">installation</a></p>
<p>As the warning shows there are sections that they have removed from the xml profile.<br>
We need to adjust the xml.</p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Tests installation with tftp configured. Uses profile from <a href="https://github.com/yast/aytests-tests" class="external">https://github.com/yast/aytests-tests</a> repo.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4424929" class="external">209.2</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4344368" class="external">209.2</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=autoyast_tftp&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #68515 (Rejected): [y] iscsi_client wont be fixed in SLE15SP2https://progress.opensuse.org/issues/685152020-06-29T19:29:07Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>bsc#1162514 is resolved but the fix for SLE15SP2 is declined[0]. Although the fix is submitted as maintenance update[1]. </p>
<p>I think we need to act on those jobs that fail in OSD and update the packages or move them in development group. </p>
<p>[0] <a href="https://build.suse.de/request/show/219816" class="external">https://build.suse.de/request/show/219816</a><br>
[1] <a href="https://build.suse.de/request/show/220839" class="external">https://build.suse.de/request/show/220839</a></p>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-iscsi_client_normal_auth_backstore_fileio@64bit fails in<br>
<a href="https://openqa.suse.de/tests/4399148/modules/iscsi_client/steps/64" class="external">iscsi_client</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>iSCSI multimachine test suite with manually configure the static network between SUTs.<br>
Authentication: 2way normal authentication, discovery authentication is not configured <br>
Backstore: fileIO<br>
Test data are included in enclosed yaml file.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4222729" class="external">190.2</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4201288" class="external">189.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=iscsi_client_normal_auth_backstore_fileio&version=15-SP2" class="external">latest</a></p>
openQA Project - action #66427 (Rejected): openqa-cli cant trigger single jobhttps://progress.opensuse.org/issues/664272020-05-05T11:05:58Zybonatakisioannis.bonatakis@suse.com
<p>I used </p>
<pre><code class="text syntaxhl" data-language="text">openqa-cli api --pretty --osd -X POST isos ISO=SLE-15-SP2-Online-x86_64-Build188.1-Media1.iso DISTRI=sle VERSION=15-SP2 FLAVOR=Online ARCH=x86_64 BUILD=188.1 TEST=autoyast_home_encrypted
</code></pre>
<p>to trigger a single job named <em>autoyast_home_encrypted</em> but it wound up running all the jobs for the Online medium. The corresponding command with openqa-client was </p>
<pre><code class="text syntaxhl" data-language="text">openqa-client isos post --host=http://openqa.suse.de ISO=SLE-15-SP2-Online-x86_64-Build188.1-Media1.iso DISTRI=sle VERSION=15-SP2 FLAVOR=Online ARCH=x86_64 BUILD=188.1 TEST=autoyast_home_encrypted
</code></pre>
<p>Expected:<br>
To run only the test job with name autoyast_home_encrypted from the TEST variable</p>
<p>Actual:<br>
Seems to ignore the TEST variable and match all the others with reasult to trigger many jobs</p>
openQA Tests - action #66043 (Rejected): [functional][y][hyperv] test failing in shutdown needs i...https://progress.opensuse.org/issues/660432020-04-24T05:23:42Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>The system is booting properly and it shutdown without problem but the openqa is hanging for some reason after login. <br>
Some logs for the serial terminal[0] </p>
<p>[0] <a href="https://gitlab.suse.de/snippets/486" class="external">https://gitlab.suse.de/snippets/486</a></p>
<p>openQA test in scenario sle-15-SP2-Full-x86_64-allmodules+allpatterns+registration@svirt-hyperv-uefi fails in<br>
<a href="https://openqa.suse.de/tests/4159856/modules/shutdown/steps/14" class="external">shutdown</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Full Medium installation that covers the following cases:<br>
1. Additional modules enabled using SCC (Legacy, Development Tools, Web and<br>
Scripting, Containers, Desktop Applications);<br>
2. All patterns installed;<br>
3. System registration is skipped during installation;<br>
4. Installation is validated by successful boot and that YaST does not<br>
report any issues;<br>
5. Registration is performed on the installed system.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4134956" class="external">179.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4128392" class="external">178.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Full&machine=svirt-hyperv-uefi&test=allmodules%2Ballpatterns%2Bregistration&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #65882 (Rejected): [functional][y][sporadic] test fails in first_boot cant ...https://progress.opensuse.org/issues/658822020-04-20T13:05:05Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>openQA test in scenario sle-15-SP2-Online-aarch64-allmodules+allpatterns@aarch64 fails in<br>
<a href="https://openqa.suse.de/tests/4139668/modules/first_boot/steps/10" class="external">first_boot</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Maintainer: jrauch</p>
<p>Perform an installation enabling all modules and selecting all patterns.<br>
This test suite always registers to have access to all modules.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4135055" class="external">179.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4126364" class="external">178.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=aarch64&distri=sle&flavor=Online&machine=aarch64&test=allmodules%2Ballpatterns&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #65858 (Rejected): [functional] ppc64le iso is not bootablehttps://progress.opensuse.org/issues/658582020-04-20T09:25:27Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>Verified also manual that the image can not boot.<br>
the output looks like:</p>
<pre><code class="text syntaxhl" data-language="text">Trying to load: from: /pci@800000020000000/scsi@5/disk@100000000000000 ... SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
failed to load CHRP boot loader.SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
E3404: Not a bootable device!
E3407: Load failed
Type 'boot' and press return to continue booting the system.
Type 'reset-all' and press return to reboot the system.
Ready!
</code></pre>
<p>openQA test in scenario sle-15-SP2-Online-ppc64le-cryptlvm@ppc64le fails in<br>
<a href="https://openqa.suse.de/tests/4135453/modules/bootloader_start/steps/2" class="external">bootloader_start</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Maintainers: okurz</p>
<p>Conduct installation with encrypted LVM selected during installation. Generated disk image used in downstream jobs.</p>
<p>(crypt-)LVM installations can take longer, especially on non-x86_64 architectures.</p>
<p>YAML_SCHEDULE=schedule/yaml/cryptlvm/cryptlvm_sle.yaml</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4135453" class="external">179.1</a> (current job)</p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4124651" class="external">178.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=ppc64le&distri=sle&flavor=Online&machine=ppc64le&test=cryptlvm&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #64328 (Rejected): [functional][y] fix hostname_inst from btrfs_libstorage-nghttps://progress.opensuse.org/issues/643282020-03-09T22:50:23Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-btrfs_libstorage-ng@64bit-ipmi fails in<br>
<a href="https://openqa.suse.de/tests/3972161/modules/hostname_inst/steps/7" class="external">hostname_inst</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Maintainers: QSF-y.</p>
<p>Test installation with btrfs filesystem and libstorage-ng.<br>
Validates no_COW attributes on subvolumes, file system on partitions, checks whether /home is on separate partition or not (depending on the system).</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/3592332" class="external">89.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: (unknown) (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit-ipmi&test=btrfs_libstorage-ng&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #64165 (Rejected): [functional][y][periodic] test fails in nis_serverhttps://progress.opensuse.org/issues/641652020-03-03T20:19:53Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>the test fails sporadically when the shortcut alt-f fails. As it is shown in the screenshot it the 'f' appears at the end of NIS domain name.</p>
<p>###Suggestion###</p>
<ul>
<li>add some timeout might solve the problem</li>
</ul>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-nis_server@64bit fails in<br>
<a href="https://openqa.suse.de/tests/3949165/modules/nis_server/steps/47" class="external">nis_server</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p><a href="https://progress.opensuse.org/issues/9900" class="external">https://progress.opensuse.org/issues/9900</a><br>
this is only the working part, there are few bugs</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/3939234" class="external">148.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/3927982" class="external">146.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=nis_server&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #59411 (Rejected): [functional][y] betawarning appears for every selected p...https://progress.opensuse.org/issues/594112019-11-14T08:35:24Zybonatakisioannis.bonatakis@suse.com
<p>The Full_installer popups the beta warning each time we select a product in the "select extension and modules" dialog. The beta warning appears first time in the welcome dialog and it should not appears twice.</p>
<p>For now we have to find a workaround to let the test continue and display a soft_failure instead of breaking the test.</p>
openQA Tests - action #59312 (Rejected): [functional][y] could not resolv repos urlshttps://progress.opensuse.org/issues/593122019-11-11T13:23:42Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-autoyast_multipath@64bit fails in<br>
<a href="https://openqa.suse.de/tests/3581339/modules/repos/steps/29" class="external">repos</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Test suite is based on profile received from our beta customers. It contains multipath and profile is edited during runtime using pre init scripts feature. See poo#20818.<br>
Maintainer: <a href="mailto:riafarov@suse.com">riafarov@suse.com</a></p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/3529444" class="external">72.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: (unknown) (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=autoyast_multipath&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #59309 (Rejected): [Functional][y]test fails in verify_ext4https://progress.opensuse.org/issues/593092019-11-11T12:07:33Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-autoyast_ext4@64bit fails in<br>
<a href="https://openqa.suse.de/tests/3579342/modules/verify_ext4/steps/4" class="external">verify_ext4</a><br>
The addresses cannot be resolved. The /etc/resolv.conf is empty</p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Test verifies autoyast installation with ext4 filesystem. Same as autoyast_ext4 with product defined in the profile. Maintainer: <a href="mailto:riafarov@suse.com">riafarov@suse.com</a></p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/3529439" class="external">72.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: (unknown) (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=autoyast_ext4&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #59061 (Rejected): test fails in installationhttps://progress.opensuse.org/issues/590612019-11-05T07:26:11Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>Seems like a problem with the control.xml configuration as it complains about the not selected base product. </p>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-autoyast_disk_as_md_member@64bit fails in<br>
<a href="https://openqa.suse.de/tests/3552993/modules/installation/steps/3" class="external">installation</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Validate partitioning for autoyast installation when using disks as Multiple Device member. Uses two devices.</p>
<p>The test verifies that the following configuration of the installed system match the parameters in autoyast profile:</p>
<ol>
<li>Number of partitions on MD RAID;</li>
<li>RAID level;</li>
<li>Mount points for MD partitions. Maintainer: <a href="mailto:oorlov@suse.de">oorlov@suse.de</a></li>
</ol>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/3529436" class="external">72.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: (unknown) (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=autoyast_disk_as_md_member&version=15-SP2" class="external">latest</a></p>
openQA Project - action #49697 (Rejected): [Bug] Needle panel shows incorrect matcheshttps://progress.opensuse.org/issues/496972019-03-26T12:41:55Zybonatakisioannis.bonatakis@suse.com
<p>I found an inconsistency between the <a href="https://openqa.suse.de/admin/needles" class="external">https://openqa.suse.de/admin/needles</a> table and the report in the corresponding test. The /admin/needles shows that the needle never matched but the test shows 100% match. </p>
<p>To reproduce:</p>
<ul>
<li>goto <a href="https://openqa.suse.de/tests/2737496#step/select_patterns_and_packages/89" class="external">https://openqa.suse.de/tests/2737496#step/select_patterns_and_packages/89</a> and check the dropdown list for inst-overview-20170403. this should be 100% in this specific job</li>
<li>visit <a href="https://openqa.suse.de/admin/needles" class="external">https://openqa.suse.de/admin/needles</a> and filter for inst-overview. The inst-overview-20170403.json 's last match is never</li>
</ul>