openSUSE Project Management Tool: Issueshttps://progress.opensuse.org/https://progress.opensuse.org/themes/openSUSE/favicon/favicon.ico?15829177842022-07-18T13:35:03ZopenSUSE Project Management Tool
Redmine qe-yam - action #113725 (Rejected): Make autoyast tests exit when the autoyast profile encounter ...https://progress.opensuse.org/issues/1137252022-07-18T13:35:03Zybonatakisioannis.bonatakis@suse.com
<a name="observation"></a>
<h1 >observation<a href="#observation" class="wiki-anchor">¶</a></h1>
<p>What happens is that when the autoyast profile is wrong or not found, the tests keep trying to match needles and continue.</p>
<p>One such case is [0]. The problem appears something like 5 minutes after it starts but keeps running for 2h where the job time limits are reached.<br>
Because this cause a slow feedback loop of the tests, in combination of the resources which are occupied without any good reason i would like to propose a solution.</p>
<p>the easier would be to match a needle with the popup and abort. <br>
I dont know if there is already a module for it but we could run a check on the xml profile before installation module. I am not sure but i think there was something implemented for this specific reason. </p>
<p>To reproduce:<br>
you can use <a href="https://gist.github.com/b10n1k/bca22757c5e4eb11473ceda30820f6d2" class="external">https://gist.github.com/b10n1k/bca22757c5e4eb11473ceda30820f6d2</a> as <u>profile.xml</u></p>
<p>Actual results:<br>
<a href="http://aquarius.suse.cz/tests/11324#step/installation/2" class="external">http://aquarius.suse.cz/tests/11324#step/installation/2</a></p>
<p>Expected:<br>
i am not sure about that. should that be one of the following:</p>
<ul>
<li>Exit after some rational time when the error exists.</li>
<li>terminate needle checking after some expected time??
the while loop have specific expectations during installation. When those expectation do not ever match, the loop run for even.</li>
<li>Validate xml before installation and exit then if problem appears</li>
</ul>
<p>[0] <a href="http://aquarius.suse.cz/tests/11324" class="external">http://aquarius.suse.cz/tests/11324</a></p>
qe-yam - action #72274 (Rejected): [y] nfs mount timeout investigationhttps://progress.opensuse.org/issues/722742020-10-06T06:45:51Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>I file this for investigation of the timeout during the nfs mount.<br>
The network looks ok and i cant see anything wrong from the y2logs. The logs ends the following</p>
<pre><code>2020-10-06 01:04:29 <1> s390kvm086(11263) [Ruby] clients/nfs_server.rb(main):156 NFS module finished
2020-10-06 01:04:29 <1> s390kvm086(11263) [Ruby] clients/nfs_server.rb(main):157 ----------------------------------------
2020-10-06 01:04:29 <1> s390kvm086(11263) [Interpreter] clients/nfs-server.rb:10 Called YaST client returned.
2020-10-06 01:04:29 <0> s390kvm086(11263) [Interpreter] clients/nfs-server.rb:10 Called YaST client returned: `ws_finish
2020-10-06 01:04:29 <1> s390kvm086(11263) [Interpreter] bin/y2start:60 Called YaST client returned.
2020-10-06 01:04:29 <0> s390kvm086(11263) [Interpreter] bin/y2start:60 Called YaST client returned: `ws_finish
2020-10-06 01:04:29 <0> s390kvm086(11263) [ui] YUI.cc(terminateUIThread):254 Sending shutdown message to UI thread
2020-10-06 01:04:29 <0> s390kvm086(11263) [ui] YUI.cc(uiThreadMainLoop):378 Shutting down UI main loop
2020-10-06 01:04:29 <0> s390kvm086(11263) [ui] YUI.cc(terminateUIThread):261 UI thread shut down correctly
2020-10-06 01:04:29 <1> s390kvm086(11263) [ncurses] YNCursesUI.cc(~YNCursesUI):121 Stop YNCursesUI
2020-10-06 01:04:29 <1> s390kvm086(11263) [ncurses] NCurses.cc(~NCurses):145 Shutdown NCurses...
2020-10-06 01:04:29 <1> s390kvm086(11263) [ncurses] NCurses.cc(~NCurses):164 NCurses down
2020-10-06 01:04:29 <0> s390kvm086(11263) [agent-ini] IniParser.cc(write):942 File /etc/sysconfig/nfs did not change. Not saving.
2020-10-06 01:04:29 <0> s390kvm086(11263) [agent-ini] IniParser.cc(write):942 File /etc/idmapd.conf did not change. Not saving.
2020-10-06 01:04:29 <0> s390kvm086(11263) [agent-ini] IniParser.cc(write):942 File /etc/os-release did not change. Not saving.
2020-10-06 01:04:29 <0> s390kvm086(11263) [agent-ini] IniParser.cc(write):942 File /usr/share/applications/YaST2/org.opensuse.yast.NFSServer.desktop did not change. Not saving.
2020-10-06 01:04:29 <0> s390kvm086(11263) [agent-ini] IniParser.cc(write):942 File /usr/share/applications/YaST2/org.opensuse.yast.NFSServer.desktop did not change. Not saving.
2020-10-06 01:04:29 <0> s390kvm086(11263) [Pkg] Y2CCPkg.cc(~Y2CCPkg):64 ~Y2CCPkg
2020-10-06 01:04:29 <0> s390kvm086(11263) [Pkg] PkgModule.cc(destroy):101 Deleting PkgModule object...
2020-10-06 01:04:29 <0> s390kvm086(11263) [Pkg] Callbacks.cc(~CallbackHandler):1925 Deleting callback handler
2020-10-06 01:04:29 <0> s390kvm086(11263) [agent-system] SystemAgent.cc(remove_directory):99 Removing temporary file /tmp/YaST2-11263-eK3ktS/exit
2020-10-06 01:04:29 <0> s390kvm086(11263) [agent-system] SystemAgent.cc(remove_directory):99 Removing temporary file /tmp/YaST2-11263-eK3ktS/stderr
2020-10-06 01:04:29 <0> s390kvm086(11263) [agent-system] SystemAgent.cc(remove_directory):99 Removing temporary file /tmp/YaST2-11263-eK3ktS/stdout
2020-10-06 01:04:29 <0> s390kvm086(11263) [agent-system] SystemAgent.cc(remove_directory):99 Removing temporary file /tmp/YaST2-11263-eK3ktS
2020-10-06 01:04:29 <1> s390kvm086(11263) [liby2] Y2ProgramComponent.cc(result):161 Sending result: `result (nil)
2020-10-06 01:04:29 <0> s390kvm086(11263) [Y2Ruby] binary/Y2RubyComponent.cc(~Y2RubyComponent):45 Destroying Y2RubyComponent
2020-10-06 01:04:29 <1> s390kvm086(11263) [Y2Ruby] binary/YRuby.cc(~YRuby):117 Shutting down ruby interpreter.
2020-10-06 01:04:29 <0> s390kvm086(11263) [YCPDeclarations] ../../src/YCPDeclarations.cc(~YCPDeclarations):221 Destructor called
</code></pre>
<p>and no error appears. </p>
<p>openQA test in scenario sle-15-SP3-Online-s390x-yast2_ncurses_gnome@s390x-kvm-sle12 fails in<br>
<a href="https://openqa.suse.de/tests/4778612/modules/yast2_nfs_server/steps/61" class="external">yast2_nfs_server</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Test for yast2 UI, ncurses only.<br>
Test suite requires HDD settings to be set, we use inheritance for that.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4774110" class="external">50.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4725363" class="external">44.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=s390x&distri=sle&flavor=Online&machine=s390x-kvm-sle12&test=yast2_ncurses_gnome&version=15-SP3" class="external">latest</a></p>
qe-yam - action #71026 (Rejected): [y] Validate updated package version with self_updatehttps://progress.opensuse.org/issues/710262020-09-07T07:33:28Zybonatakisioannis.bonatakis@suse.com
<p>With the work on <a href="https://bugzilla.suse.com/show_bug.cgi?id=1175614" class="external">https://bugzilla.suse.com/show_bug.cgi?id=1175614</a> done, we can check what version the self update download and use in the inst-sys. Rodion has already created validation module <code>tests/installation/validate_self_update.pm</code> checking that the feature attempts to download some packages from the update repo but it does not check/compare the package version between the default inst-sys and the update repo. The inst-sys stores the package version in <code>/.packages.root</code>. With yast2-installation-4.3.16 and above we should find <code>/.packages.self_update</code> file which we can use to compare</p>
qe-yam - action #69259 (Rejected): [y] Test fully qualified domain name as an input for yast2-net...https://progress.opensuse.org/issues/692592020-07-23T06:10:53Zybonatakisioannis.bonatakis@suse.com
<p>Although it is recommended to not use a FQDN as the static hostname there is not a restriction in the kernel or hostnamectl to use it and thus, there should not be a restriction in YaST in case that the user has a use case in which it is needed. YaST has recent changes in yast2-network to address this.</p>
<p>This is not typical use case, so low priority.</p>
openQA Tests - action #68908 (Rejected): [y] Remove deprecated sections from autoyast profilehttps://progress.opensuse.org/issues/689082020-07-13T07:10:25Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-autoyast_tftp@64bit fails in<br>
<a href="https://openqa.suse.de/tests/4445217/modules/installation/steps/5" class="external">installation</a></p>
<p>As the warning shows there are sections that they have removed from the xml profile.<br>
We need to adjust the xml.</p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Tests installation with tftp configured. Uses profile from <a href="https://github.com/yast/aytests-tests" class="external">https://github.com/yast/aytests-tests</a> repo.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4424929" class="external">209.2</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4344368" class="external">209.2</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=autoyast_tftp&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #68515 (Rejected): [y] iscsi_client wont be fixed in SLE15SP2https://progress.opensuse.org/issues/685152020-06-29T19:29:07Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>bsc#1162514 is resolved but the fix for SLE15SP2 is declined[0]. Although the fix is submitted as maintenance update[1]. </p>
<p>I think we need to act on those jobs that fail in OSD and update the packages or move them in development group. </p>
<p>[0] <a href="https://build.suse.de/request/show/219816" class="external">https://build.suse.de/request/show/219816</a><br>
[1] <a href="https://build.suse.de/request/show/220839" class="external">https://build.suse.de/request/show/220839</a></p>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-iscsi_client_normal_auth_backstore_fileio@64bit fails in<br>
<a href="https://openqa.suse.de/tests/4399148/modules/iscsi_client/steps/64" class="external">iscsi_client</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>iSCSI multimachine test suite with manually configure the static network between SUTs.<br>
Authentication: 2way normal authentication, discovery authentication is not configured <br>
Backstore: fileIO<br>
Test data are included in enclosed yaml file.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4222729" class="external">190.2</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4201288" class="external">189.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=iscsi_client_normal_auth_backstore_fileio&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #66043 (Rejected): [functional][y][hyperv] test failing in shutdown needs i...https://progress.opensuse.org/issues/660432020-04-24T05:23:42Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>The system is booting properly and it shutdown without problem but the openqa is hanging for some reason after login. <br>
Some logs for the serial terminal[0] </p>
<p>[0] <a href="https://gitlab.suse.de/snippets/486" class="external">https://gitlab.suse.de/snippets/486</a></p>
<p>openQA test in scenario sle-15-SP2-Full-x86_64-allmodules+allpatterns+registration@svirt-hyperv-uefi fails in<br>
<a href="https://openqa.suse.de/tests/4159856/modules/shutdown/steps/14" class="external">shutdown</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Full Medium installation that covers the following cases:<br>
1. Additional modules enabled using SCC (Legacy, Development Tools, Web and<br>
Scripting, Containers, Desktop Applications);<br>
2. All patterns installed;<br>
3. System registration is skipped during installation;<br>
4. Installation is validated by successful boot and that YaST does not<br>
report any issues;<br>
5. Registration is performed on the installed system.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4134956" class="external">179.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4128392" class="external">178.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Full&machine=svirt-hyperv-uefi&test=allmodules%2Ballpatterns%2Bregistration&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #65882 (Rejected): [functional][y][sporadic] test fails in first_boot cant ...https://progress.opensuse.org/issues/658822020-04-20T13:05:05Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>openQA test in scenario sle-15-SP2-Online-aarch64-allmodules+allpatterns@aarch64 fails in<br>
<a href="https://openqa.suse.de/tests/4139668/modules/first_boot/steps/10" class="external">first_boot</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Maintainer: jrauch</p>
<p>Perform an installation enabling all modules and selecting all patterns.<br>
This test suite always registers to have access to all modules.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4135055" class="external">179.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4126364" class="external">178.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=aarch64&distri=sle&flavor=Online&machine=aarch64&test=allmodules%2Ballpatterns&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #65858 (Rejected): [functional] ppc64le iso is not bootablehttps://progress.opensuse.org/issues/658582020-04-20T09:25:27Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>Verified also manual that the image can not boot.<br>
the output looks like:</p>
<pre><code class="text syntaxhl" data-language="text">Trying to load: from: /pci@800000020000000/scsi@5/disk@100000000000000 ... SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
failed to load CHRP boot loader.SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
SCSI-DISK: Access beyond end of device !
E3404: Not a bootable device!
E3407: Load failed
Type 'boot' and press return to continue booting the system.
Type 'reset-all' and press return to reboot the system.
Ready!
</code></pre>
<p>openQA test in scenario sle-15-SP2-Online-ppc64le-cryptlvm@ppc64le fails in<br>
<a href="https://openqa.suse.de/tests/4135453/modules/bootloader_start/steps/2" class="external">bootloader_start</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Maintainers: okurz</p>
<p>Conduct installation with encrypted LVM selected during installation. Generated disk image used in downstream jobs.</p>
<p>(crypt-)LVM installations can take longer, especially on non-x86_64 architectures.</p>
<p>YAML_SCHEDULE=schedule/yaml/cryptlvm/cryptlvm_sle.yaml</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/4135453" class="external">179.1</a> (current job)</p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/4124651" class="external">178.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=ppc64le&distri=sle&flavor=Online&machine=ppc64le&test=cryptlvm&version=15-SP2" class="external">latest</a></p>
qe-yam - action #65447 (Rejected): Extend form of salt-formulas testhttps://progress.opensuse.org/issues/654472020-04-08T11:25:00Zybonatakisioannis.bonatakis@suse.com
<p>we want to extend smoke test for salt formulas using more element in the UI.<br>
As now the formula in use looks like <a href="http://aquarius.suse.cz/tests/2209#step/installation/9" class="external">http://aquarius.suse.cz/tests/2209#step/installation/9</a>.</p>
<p>we need to edit the /data/yast2/salt.tar.gz modify the formula/motd/form.yaml.</p>
<p>take a look at the relative ticket <a href="https://progress.opensuse.org/issues/49550" class="external">https://progress.opensuse.org/issues/49550</a></p>
<p>Also good to add validation for cloned profile( need to be added)</p>
<p>** Acceptance criteria</p>
<ul>
<li>Validation of cloned profile for relevant part</li>
<li>use additional components in the formula and we validate them after installation</li>
</ul>
openQA Tests - action #64165 (Rejected): [functional][y][periodic] test fails in nis_serverhttps://progress.opensuse.org/issues/641652020-03-03T20:19:53Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>the test fails sporadically when the shortcut alt-f fails. As it is shown in the screenshot it the 'f' appears at the end of NIS domain name.</p>
<p>###Suggestion###</p>
<ul>
<li>add some timeout might solve the problem</li>
</ul>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-nis_server@64bit fails in<br>
<a href="https://openqa.suse.de/tests/3949165/modules/nis_server/steps/47" class="external">nis_server</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p><a href="https://progress.opensuse.org/issues/9900" class="external">https://progress.opensuse.org/issues/9900</a><br>
this is only the working part, there are few bugs</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/3939234" class="external">148.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.suse.de/tests/3927982" class="external">146.1</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=nis_server&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #59411 (Rejected): [functional][y] betawarning appears for every selected p...https://progress.opensuse.org/issues/594112019-11-14T08:35:24Zybonatakisioannis.bonatakis@suse.com
<p>The Full_installer popups the beta warning each time we select a product in the "select extension and modules" dialog. The beta warning appears first time in the welcome dialog and it should not appears twice.</p>
<p>For now we have to find a workaround to let the test continue and display a soft_failure instead of breaking the test.</p>
openQA Tests - action #59061 (Rejected): test fails in installationhttps://progress.opensuse.org/issues/590612019-11-05T07:26:11Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>Seems like a problem with the control.xml configuration as it complains about the not selected base product. </p>
<p>openQA test in scenario sle-15-SP2-Online-x86_64-autoyast_disk_as_md_member@64bit fails in<br>
<a href="https://openqa.suse.de/tests/3552993/modules/installation/steps/3" class="external">installation</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Validate partitioning for autoyast installation when using disks as Multiple Device member. Uses two devices.</p>
<p>The test verifies that the following configuration of the installed system match the parameters in autoyast profile:</p>
<ol>
<li>Number of partitions on MD RAID;</li>
<li>RAID level;</li>
<li>Mount points for MD partitions. Maintainer: <a href="mailto:oorlov@suse.de">oorlov@suse.de</a></li>
</ol>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/3529436" class="external">72.1</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: (unknown) (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=x86_64&distri=sle&flavor=Online&machine=64bit&test=autoyast_disk_as_md_member&version=15-SP2" class="external">latest</a></p>
openQA Tests - action #57749 (Rejected): [functional][y] apply solution for yast2_snapper_ncurses...https://progress.opensuse.org/issues/577492019-10-07T11:30:58Zybonatakisioannis.bonatakis@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>openQA test in scenario sle-15-SP2-Installer-DVD-s390x-yast2_ncurses@s390x-kvm-sle12 fails in<br>
<a href="https://openqa.suse.de/tests/3445868/modules/yast2_snapper_ncurses/steps/57" class="external">yast2_snapper_ncurses</a></p>
<p>It seems that the solution for the cause of the failure on yast2_snapper_ncurses already exists as it appears on [1]. i am not aware how exactly needles are processed but seems that the needle yast2_snapper-show_testdata-gnome-20190215 should be the match. </p>
<p>[1] <a href="https://openqa.opensuse.org/tests/1049845#step/yast2_snapper/48" class="external">https://openqa.opensuse.org/tests/1049845#step/yast2_snapper/48</a></p>
<a name="Test-suite-description"></a>
<h2 >Test suite description<a href="#Test-suite-description" class="wiki-anchor">¶</a></h2>
<p>Maintainer: zluo, riafarov Test for yast2 UI, ncurses only. Running on created gnome images which provides both text console for ncurses UI tests as well as the gnome environment for the GUI tests.</p>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.suse.de/tests/3282833" class="external">20.3</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: (unknown) (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.suse.de/tests/latest?arch=s390x&distri=sle&flavor=Installer-DVD&machine=s390x-kvm-sle12&test=yast2_ncurses&version=15-SP2" class="external">latest</a></p>
openQA Project - action #49697 (Rejected): [Bug] Needle panel shows incorrect matcheshttps://progress.opensuse.org/issues/496972019-03-26T12:41:55Zybonatakisioannis.bonatakis@suse.com
<p>I found an inconsistency between the <a href="https://openqa.suse.de/admin/needles" class="external">https://openqa.suse.de/admin/needles</a> table and the report in the corresponding test. The /admin/needles shows that the needle never matched but the test shows 100% match. </p>
<p>To reproduce:</p>
<ul>
<li>goto <a href="https://openqa.suse.de/tests/2737496#step/select_patterns_and_packages/89" class="external">https://openqa.suse.de/tests/2737496#step/select_patterns_and_packages/89</a> and check the dropdown list for inst-overview-20170403. this should be 100% in this specific job</li>
<li>visit <a href="https://openqa.suse.de/admin/needles" class="external">https://openqa.suse.de/admin/needles</a> and filter for inst-overview. The inst-overview-20170403.json 's last match is never</li>
</ul>