openSUSE Project Management Tool: Issueshttps://progress.opensuse.org/https://progress.opensuse.org/themes/openSUSE/favicon/favicon.ico?15829177842020-08-20T11:09:57ZopenSUSE Project Management Tool
Redmine Jump 15.2 - action #70303 (New): Disable ignore_missing_packages bit in the ftp tree buildhttps://progress.opensuse.org/issues/703032020-08-20T11:09:57Zmlin7442mlin@suse.com
<p>Currently Jump have enabled ignore_missing_packages="true" in the ftp tree build for workaround package not found issue eg. scalapack-openmpi3, etc., we need to disable it before release and to ensure all RPMs was there, or filter them out from NON_FTP_PACKAGES list(bad choice though).</p>
Jump 15.2 - action #70300 (New): Create pool repository for SUSE:SLE-15-SP2:Updatehttps://progress.opensuse.org/issues/703002020-08-20T10:58:11Zmlin7442mlin@suse.com
<p>There are new maint. update appeared in SUSE:SLE-15-SP2:Update, we should add pool repository to SUSE:SLE-15-SP2:Update project and sync RPMs from IBS to there. And maybe we should uses this pool to instead of SUSE:SLE-15-SP2:GA pool in Jump:15.2?</p>
Jump 15.2 - action #70297 (New): Move to openSUSE:Backports:SLE-15-SP2:Update, openSUSE:Backports...https://progress.opensuse.org/issues/702972020-08-20T10:53:52Zmlin7442mlin@suse.com
<p>Jump:15.2 should uses openSUSE:Backports:SLE-15-SP2:Update to instead of openSUSE:Backports:SLE-15-SP2:GA since openSUSE:Backports:SLE-15-SP2:GA development is all done and was locked.<br>
Any further package update will go to openSUSE:Backports:SLE-15-SP2:Update, ie. any fix for Jump via Backports will appeared in :Update rather than :GA.</p>
openQA Project - action #57077 (Resolved): [functional][u][sporadic] test fails in vlc - open net...https://progress.opensuse.org/issues/570772019-09-19T07:16:29Zmlin7442mlin@suse.com
<a name="Observation"></a>
<h2 >Observation<a href="#Observation" class="wiki-anchor">¶</a></h2>
<p>openQA test in scenario opensuse-Tumbleweed-NET-x86_64-gnome@64bit fails in<br>
<a href="https://openqa.opensuse.org/tests/1035174/modules/vlc/steps/27" class="external">vlc</a></p>
<a name="Suggestions"></a>
<h2 >Suggestions<a href="#Suggestions" class="wiki-anchor">¶</a></h2>
<ul>
<li>Change the key combination with simple keys or use another approach to perform the same action without sending multiple keys with one send_key.</li>
</ul>
<a name="Reproducible"></a>
<h2 >Reproducible<a href="#Reproducible" class="wiki-anchor">¶</a></h2>
<p>Fails since (at least) Build <a href="https://openqa.opensuse.org/tests/1030905" class="external">20190911</a></p>
<a name="Expected-result"></a>
<h2 >Expected result<a href="#Expected-result" class="wiki-anchor">¶</a></h2>
<p>Last good: <a href="https://openqa.opensuse.org/tests/1029412" class="external">20190909</a> (or more recent)</p>
<a name="Further-details"></a>
<h2 >Further details<a href="#Further-details" class="wiki-anchor">¶</a></h2>
<p>Always latest result in this scenario: <a href="https://openqa.opensuse.org/tests/latest?arch=x86_64&distri=opensuse&flavor=NET&machine=64bit&test=gnome&version=Tumbleweed" class="external">latest</a></p>
openQA Project - action #50822 (Rejected): test result to be none but it was passed actuallyhttps://progress.opensuse.org/issues/508222019-04-28T13:02:32Zmlin7442mlin@suse.com
<p>See await_install's result at <a href="https://openqa.opensuse.org/tests/919654" class="external">https://openqa.opensuse.org/tests/919654</a> or boot_to_desktop at <a href="https://openqa.opensuse.org/tests/919641" class="external">https://openqa.opensuse.org/tests/919641</a></p>
<p>The test should be done and was passed, however the result is none, and the overall result will to be failed.</p>
openQA Project - action #46544 (Resolved): webui should refuse people creating needles without bu...https://progress.opensuse.org/issues/465442019-01-23T10:45:21Zmlin7442mlin@suse.com
<p>since a travis task in needles project has enabled to check bugref is existing in the filename when workaround tag was introduced, webui should refuse people creating needles without bugref in the filename when workaround was checked.</p>
openQA Project - action #17962 (Resolved): Do not upload empty serial_terminal.txt filehttps://progress.opensuse.org/issues/179622017-03-24T10:51:32Zmlin7442mlin@suse.com
<p>If serial_terminal.txt file is empty then it should not be uploaded.<br>
eg. <a href="https://openqa.opensuse.org/tests/375803/file/serial_terminal.txt" class="external">https://openqa.opensuse.org/tests/375803/file/serial_terminal.txt</a></p>
openQA Project - action #17666 (Resolved): [tools]Failed to create needle - no areas definedhttps://progress.opensuse.org/issues/176662017-03-10T14:13:23Zmlin7442mlin@suse.com
<a name="observation"></a>
<h2 >observation<a href="#observation" class="wiki-anchor">¶</a></h2>
<p>Trying to save a needle not based on any existing needle and not taking matches from other needles but with a matching area defined yields an error that "no areas are defined" while the json preview also shows correct content.</p>
<a name="steps-to-reproduce"></a>
<h2 >steps to reproduce<a href="#steps-to-reproduce" class="wiki-anchor">¶</a></h2>
<p>1) open needle editor<br>
2) select Needle based on to None<br>
3) unchecked "Take matches"<br>
Now json is in a fresh state.<br>
4) create matching area<br>
5) add a tag<br>
6) now the json preview shows proper tag and areas, saving needle<br>
RED WARNING show up - Unable to save needle : no areas defined</p>
<a name="problem"></a>
<h2 >problem<a href="#problem" class="wiki-anchor">¶</a></h2>
<p>H1. needle editor broken</p>
<a name="suggestion"></a>
<h2 >suggestion<a href="#suggestion" class="wiki-anchor">¶</a></h2>
<ul>
<li>Debug <code>assets/javascripts/needleeditor.js</code></li>
</ul>
<a name="workaround"></a>
<h2 >workaround<a href="#workaround" class="wiki-anchor">¶</a></h2>
<p>probably it helps to take any needle as template and/or select 'take matches' and then save.</p>
<a name="further-details"></a>
<h2 >further details<a href="#further-details" class="wiki-anchor">¶</a></h2>
<p>screenshot attached</p>
openQA Project - action #14588 (Resolved): gru removes iso too quick that caused some staging pro...https://progress.opensuse.org/issues/145882016-11-01T09:06:37Zmlin7442mlin@suse.com
<p>gru removes iso too quick on o3, the same iso resynced later, that caused some staging project can not finished.</p>
<p>example:<br>
<a href="https://openqa.opensuse.org/tests/294471" class="external">https://openqa.opensuse.org/tests/294471</a> is tested and finished at 2016-10-31 12:35:46, but after around 20 hours it was removed by gru, at that moment this staging project does not merge yet so the iso resynced <a href="https://openqa.opensuse.org/tests/295182" class="external">https://openqa.opensuse.org/tests/295182</a> </p>
openQA Project - action #13804 (Resolved): the overview filter is buggy if the parameter included...https://progress.opensuse.org/issues/138042016-09-19T06:50:59Zmlin7442mlin@suse.com
<p>if the parameter included ":" - colon in URL, in the staging test overview, clicking the Apply button multiple times in the overview filter, whatever the filtering condition in the overview filter, the parameter's value will converted to an weird value. </p>
<p>Reproducible step:<br>
1) go to <a href="https://openqa.opensuse.org/tests/overview?version=Staging%3AI&groupid=2&build=590.1&distri=opensuse" class="external">https://openqa.opensuse.org/tests/overview?version=Staging%3AI&groupid=2&build=590.1&distri=opensuse</a><br>
2) checked whatever filtering condition and click apply button<br>
3) if checked softfailed, then the URL being <a href="https://openqa.opensuse.org/tests/overview?result=softfailed&arch=&version=Staging%253AI&groupid=2&build=590.1&distri=opensuse#" class="external">https://openqa.opensuse.org/tests/overview?result=softfailed&arch=&version=Staging%253AI&groupid=2&build=590.1&distri=opensuse#</a> , "version" is Staging%253AI<br>
4) click the apply button again, "version" being Staging%25253AI, keep appending "25"<br>
5) unselected all condition and click the apply button, webui show you nothing because the "version"'s value is wrong</p>
<p>The issue also can found in master.</p>
openQA Project - action #10292 (Resolved): console have to reset or deactivate if worker loaded l...https://progress.opensuse.org/issues/102922016-01-19T09:32:36Zmlin7442mlin@suse.com
<p>use case: console was changed to activated in last step, however the last step is failed and unfortunately worker loaded lastgood, worker still think the console is activated but it was rollback to deactivated actually, it might need to register the origin state before each test started and rollback to it if loaded lastgood.</p>
openQA Project - action #10050 (Closed): [OOM] isotovideo killed openqa-websockets due to OOMhttps://progress.opensuse.org/issues/100502015-12-29T05:24:49Zmlin7442mlin@suse.com
<p>isotovideo killed openqa-websockets due to OOM, it was happened at 2015-12-28. see more details in oom_20151228.log file.</p>
<p>I know the similar issue has been happened, so just for a record.</p>
openQA Project - action #7190 (Resolved): The worker died due to the scheduler not respondinghttps://progress.opensuse.org/issues/71902015-04-09T07:23:32Zmlin7442mlin@suse.com
<p>See this issue on openqa.oo, the log can found <a href="https://openqa.opensuse.org/tests/55761" class="external">https://openqa.opensuse.org/tests/55761</a> <- 3 months life</p>
openQA Project - action #7120 (Resolved): overview page should allow with group param ashttps://progress.opensuse.org/issues/71202015-04-02T09:49:52Zmlin7442mlin@suse.com
<p>since we added group param, the overview should also allow group param.</p>
<p><a href="https://github.com/os-autoinst/openQA/blob/master/lib/OpenQA/Controller/Test.pm#L321" class="external">https://github.com/os-autoinst/openQA/blob/master/lib/OpenQA/Controller/Test.pm#L321</a></p>
openQA Project - action #2690 (Resolved): the {OK,unknown,fail} number is empty when 'match' fie...https://progress.opensuse.org/issues/26902014-06-13T06:43:59Zmlin7442mlin@suse.com
<p>the {OK,unknown,fail} number is empty (and running tests are displayed as "preprocessing") when 'match' field set, looks like openQA doesn't read the information from the filesystem, e.g. <a href="https://openqa.opensuse.org/tests/?sort=-mtime&hours=18&match=staging&ob=" class="external">https://openqa.opensuse.org/tests/?sort=-mtime&hours=18&match=staging&ob=</a></p>